clarified some wording and minor formatting changes
This commit is contained in:
parent
00af2a2196
commit
53a7b23c35
|
@ -15,7 +15,7 @@ The Lollipop Cloud project is a way to self-host internet services, such as a we
|
|||
- We have generated Armbian builds specifically for the Lollipop's supported boards. You can [download Armbian builds for Lollipops here (link)](https://dl.lollipopcloud.solutions/files/armbian).
|
||||
- **Note about the Raspberry Pi:** The [Raspberry Pi 3 (link)](https://www.raspberrypi.org/documentation/hardware/raspberrypi/README.md) with the BCM2837 processor, at least 512MB RAM, and Raspbian may work well as a Lollipop; however, we have not tested this configuration at this time.
|
||||
- A means to interact with the SBC (monitor/keyboard, serial adapter, or ssh via ethernet).
|
||||
- A wifi adapter, USB cellular modem (3G/4G/WCDMA/LTE), [GPS module (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware/gps.md), [RTC (Real Time Clock) (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware/rtc.md), [Bluetooth Serial Terminal (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware/bluetooth_terminal.md), other hardware you need for your custom setup. See also: [Hardware Considerations (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware_notes.md).
|
||||
- A wifi adapter (or two), USB cellular modem (3G/4G/WCDMA/LTE), [GPS module (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware/gps.md), [RTC (Real Time Clock) (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware/rtc.md), [Bluetooth Serial Terminal (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware/bluetooth_terminal.md), other hardware you need for your custom setup. See also: [Hardware Considerations (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/hardware_notes.md).
|
||||
|
||||
## Initial Setup
|
||||
|
||||
|
|
|
@ -141,7 +141,7 @@ Run ```nmcli connection del [UUID]``` for each UUID listed in the previous comma
|
|||
|
||||
### WiFi 2.4ghz Access Point
|
||||
|
||||
This setup will configure the Lollipop's internal WiFi adapter as an access point. NetworkManager assumes you'll have only *one* Access Point active per device at a time. If you'd prefer your wireless access point use 5ghz, skip this step.
|
||||
This setup will configure the Lollipop's internal WiFi adapter as an access point. NetworkManager assumes you'll have only *one* Access Point active per device at a time. If you'd prefer your wireless access point use 5ghz AND your hardware is capable of 5ghz, skip this step. *Example: the OrangePi PC Plus must be configured as a 2.4ghz access point, unless you are configuring an upgraded or external adapter capable of 5ghz.*
|
||||
|
||||
2.4ghz is a good choice and a default for most commerical access points for compatibility with WiFi clients. This is recommended if you're not sure.
|
||||
|
||||
|
|
|
@ -5,11 +5,14 @@ The Lollipop is a [single-board computer (SBC) (link)](https://en.wikipedia.org/
|
|||
# Getting Started
|
||||
You will need a single-board computer (SBC) like an [Orange Pi (link)](http://www.orangepi.org/).
|
||||
|
||||
For the basic start up and set up of your Orange Pi, you will need either (a) a keyboard and a way to view the display (either an HDMI cable OR a [serial console](https://www.pine64.org/?product=padi-serial-console)), OR (b) an ethernet connection.
|
||||
For the basic start up and set up of your Orange Pi, you will need one of the following configurations:
|
||||
|
||||
- a keyboard and a way to view the display (either an HDMI cable with a monitor OR a [serial console](https://www.pine64.org/?product=padi-serial-console))
|
||||
- an ethernet connection by connecting your SBC to your home router with an ethernet cord (or "patch cable")
|
||||
|
||||
You will also need an SD card formatted with Armbian installed.
|
||||
|
||||
## Installing Armbian onto an SD card
|
||||
## Installing Armbian on an SD card
|
||||
[Armbian](https://www.armbian.com/) is a Linux operating system based on Debian and Ubuntu, specifically designed for [ARM boards (link)](https://en.wikipedia.org/wiki/ARM_architecture).
|
||||
|
||||
__NOTE:__ Raspberry Pi 3 users will need to use [Raspbian (link)](https://www.raspberrypi.org/downloads/raspbian/) instead of Armbian.
|
||||
|
|
Reference in New Issue