12 lines
473 B
Markdown
12 lines
473 B
Markdown
# Pro Micro splittest
|
|
|
|
To trigger keypress, short together pins *B3* and *B6* (marked on the PCB as *14* and *10*).
|
|
|
|
## Wiring
|
|
- Add switches to both Pro Micros across B3 and B6 pins
|
|
- Add pull-up resistor to left side between VCC and F6
|
|
- Add pull-down resistors to right side between GND and F6
|
|
- Connect the following pins on both sides together: D0, D1, GND, VCC
|
|
- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
|
|
- Wire Di of RGB strip for each half to D3
|