264 lines
7.6 KiB
C
264 lines
7.6 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.io/license.html
|
|
*/
|
|
|
|
#include "gfx.h"
|
|
|
|
#if GFX_USE_GDISP
|
|
|
|
#if defined(GDISP_SCREEN_HEIGHT) || defined(GDISP_SCREEN_HEIGHT)
|
|
#if GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_DIRECT
|
|
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
|
|
#elif GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_MACRO
|
|
COMPILER_WARNING("GDISP: This low level driver does not support setting a screen size. It is being ignored.")
|
|
#endif
|
|
#undef GDISP_SCREEN_WIDTH
|
|
#undef GDISP_SCREEN_HEIGHT
|
|
#endif
|
|
|
|
#define GDISP_DRIVER_VMT GDISPVMT_SSD1351
|
|
#include "gdisp_lld_config.h"
|
|
#include "../../../src/gdisp/gdisp_driver.h"
|
|
|
|
#include "board_SSD1351.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
#ifndef GDISP_SCREEN_HEIGHT
|
|
#define GDISP_SCREEN_HEIGHT 128
|
|
#endif
|
|
#ifndef GDISP_SCREEN_WIDTH
|
|
#define GDISP_SCREEN_WIDTH 128
|
|
#endif
|
|
#ifndef GDISP_INITIAL_CONTRAST
|
|
#define GDISP_INITIAL_CONTRAST 100
|
|
#endif
|
|
#ifndef GDISP_INITIAL_BACKLIGHT
|
|
#define GDISP_INITIAL_BACKLIGHT 100
|
|
#endif
|
|
|
|
#include "SSD1351.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
// Some common routines and macros
|
|
#define dummy_read(g) { volatile gU16 dummy; dummy = read_data(g); (void) dummy; }
|
|
#define write_reg(g, reg, data) { write_cmd(g, reg); write_data(g, data); }
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
LLDSPEC gBool gdisp_lld_init(GDisplay *g) {
|
|
// No private area for this controller
|
|
g->priv = 0;
|
|
|
|
// Initialise the board interface
|
|
init_board(g);
|
|
|
|
// Hardware reset
|
|
setpin_reset(g, gTrue);
|
|
gfxSleepMilliseconds(20);
|
|
setpin_reset(g, gFalse);
|
|
gfxSleepMilliseconds(20);
|
|
|
|
// Get the bus for the following initialisation commands
|
|
acquire_bus(g);
|
|
|
|
write_reg(g, 0xFD, 0x12); // unlock OLED driver IC
|
|
write_reg(g, 0xFD, 0xB1); // make commands A1, B1, B3, BB, BE, C1 accesible in unlocked state
|
|
write_cmd(g, 0xAE); // sleep mode ON (display off)
|
|
write_reg(g, 0xB3, 0xF1); // Front clock divider / osc freq - Osc = 0xF; div = 2
|
|
write_reg(g, 0xCA, 127); // set MUX ratio
|
|
write_reg(g, 0xA0, 0b01110100); // Set re-map / color depth
|
|
// [0] : address increment (0: horizontal, 1: vertical, reset 0)
|
|
// [1] : column remap (0: 0..127, 1: 127..0, reset 0)
|
|
// [2] : color remap (0: A->B->C, 1: C->B->A, reset 0)
|
|
// [3] : reserved
|
|
// [4] : column scan direction (0: top->down, 1: bottom->up, reset 0)
|
|
// [5] : odd/even split COM (0: disable, 1: enable, reset 1)
|
|
// [6..7] : color depth (00,01: 65k, 10: 262k, 11: 262k format 2)
|
|
|
|
write_cmd(g, 0x15); // Set Column address
|
|
write_data(g, 0x00); // start
|
|
write_data(g, 0x7F); // end
|
|
|
|
write_cmd(g, 0x75); // set row address
|
|
write_data(g, 0x00); // start
|
|
write_data(g, 0x7F); // end
|
|
|
|
write_reg(g, 0xA1, 0x00); // set display start line - 0
|
|
write_reg(g, 0xA2, 0x00); // set display offset - 0
|
|
write_reg(g, 0xB5, 0x00); // set GPIO - both HiZ, input disabled
|
|
write_reg(g, 0xAB, 0x01); // enable internal VDD regulator
|
|
write_reg(g, 0xB1, 0x32); // set reset / pre-charge period - phase 2: 3 DCLKs, phase 1: 5 DCLKs
|
|
write_reg(g, 0xBE, 0x05); // set VComH voltage - 0.82*Vcc
|
|
write_reg(g, 0xBB, 0x17); // set pre-charge voltage - 0.6*Vcc
|
|
write_cmd(g, 0xA6); // set display mode: reset to normal display
|
|
|
|
write_cmd(g, 0xC1); // set contrast current for A,B,C
|
|
write_data(g, 0xC8);
|
|
write_data(g, 0x80);
|
|
write_data(g, 0xC8);
|
|
|
|
write_reg(g, 0xC7, 0x0F); // master contrast current control - no change
|
|
|
|
write_cmd(g, 0xB4); // set segment low voltage
|
|
write_data(g, 0xA0); // external VSL
|
|
write_data(g, 0xB5); // hard value
|
|
write_data(g, 0x55); // hard value
|
|
|
|
write_reg(g, 0xB6, 0x01); // set second pre-charge period - 1 DCLKs
|
|
write_cmd(g, 0xAF); // sleep mode OFF (display on)
|
|
write_cmd(g, 0x5C); // write to RAM
|
|
|
|
// Finish Init
|
|
post_init_board(g);
|
|
|
|
// Release the bus
|
|
release_bus(g);
|
|
|
|
/* Turn on the back-light */
|
|
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
|
|
|
|
/* Initialise the GDISP structure */
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Orientation = gOrientation0;
|
|
g->g.Powermode = gPowerOn;
|
|
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
|
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
|
return gTrue;
|
|
}
|
|
|
|
#if GDISP_HARDWARE_STREAM_WRITE
|
|
LLDSPEC void gdisp_lld_write_start(GDisplay *g) {
|
|
acquire_bus(g);
|
|
write_cmd(g, SSD1351_SET_COLUMN_ADDRESS);
|
|
write_data(g, g->p.x);
|
|
write_data(g, g->p.x + g->p.cx - 1);
|
|
write_cmd(g, SSD1351_SET_ROW_ADDRESS);
|
|
write_data(g, g->p.y);
|
|
write_data(g, g->p.y + g->p.cy - 1);
|
|
write_cmd(g, SSD1351_WRITE_RAM);
|
|
}
|
|
LLDSPEC void gdisp_lld_write_color(GDisplay *g) {
|
|
LLDCOLOR_TYPE c;
|
|
|
|
c = gdispColor2Native(g->p.color);
|
|
write_data(g, c >> 8);
|
|
write_data(g, c & 0xFF);
|
|
}
|
|
LLDSPEC void gdisp_lld_write_stop(GDisplay *g) {
|
|
release_bus(g);
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_HARDWARE_STREAM_READ
|
|
#error "SSD1351 - Stream Read is not supported yet"
|
|
LLDSPEC void gdisp_lld_read_start(GDisplay *g) {
|
|
acquire_bus(g);
|
|
//set_viewport(g);
|
|
//write_index(g, 0x2E);
|
|
setreadmode(g);
|
|
//dummy_read(g);
|
|
}
|
|
LLDSPEC gColor gdisp_lld_read_color(GDisplay *g) {
|
|
gU16 data;
|
|
|
|
data = read_data(g);
|
|
return gdispNative2Color(data);
|
|
}
|
|
LLDSPEC void gdisp_lld_read_stop(GDisplay *g) {
|
|
setwritemode(g);
|
|
release_bus(g);
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
|
|
#error "SSD1351 - Hardware control is not supported yet"
|
|
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
|
switch(g->p.x) {
|
|
case GDISP_CONTROL_POWER:
|
|
if (g->g.Powermode == (gPowermode)g->p.ptr)
|
|
return;
|
|
switch((gPowermode)g->p.ptr) {
|
|
case gPowerOff:
|
|
case gPowerSleep:
|
|
case gPowerDeepSleep:
|
|
acquire_bus(g);
|
|
//TODO
|
|
release_bus(g);
|
|
break;
|
|
case gPowerOn:
|
|
acquire_bus(g);
|
|
//TODO
|
|
release_bus(g);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Powermode = (gPowermode)g->p.ptr;
|
|
return;
|
|
|
|
case GDISP_CONTROL_ORIENTATION:
|
|
if (g->g.Orientation == (gOrientation)g->p.ptr)
|
|
return;
|
|
switch((gOrientation)g->p.ptr) {
|
|
case gOrientation0:
|
|
acquire_bus(g);
|
|
//TODO
|
|
release_bus(g);
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
break;
|
|
case gOrientation90:
|
|
acquire_bus(g);
|
|
//TODO
|
|
release_bus(g);
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
|
break;
|
|
case gOrientation180:
|
|
acquire_bus(g);
|
|
//TODO
|
|
release_bus(g);
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
break;
|
|
case gOrientation270:
|
|
acquire_bus(g);
|
|
//TODO
|
|
release_bus(g);
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Orientation = (gOrientation)g->p.ptr;
|
|
return;
|
|
|
|
case GDISP_CONTROL_BACKLIGHT:
|
|
if ((unsigned)g->p.ptr > 100)
|
|
g->p.ptr = (void *)100;
|
|
set_backlight(g, (unsigned)g->p.ptr);
|
|
g->g.Backlight = (unsigned)g->p.ptr;
|
|
return;
|
|
|
|
//case GDISP_CONTROL_CONTRAST:
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#endif /* GFX_USE_GDISP */
|