379 lines
12 KiB
C
379 lines
12 KiB
C
/*
|
|
* This file is subject to the terms of the GFX License. If a copy of
|
|
* the license was not distributed with this file, you can obtain one at:
|
|
*
|
|
* http://ugfx.io/license.html
|
|
*/
|
|
|
|
#include "gfx.h"
|
|
|
|
#if GFX_USE_GDISP
|
|
|
|
/* This controller is only ever used with a 240 x 320 display */
|
|
#if defined(GDISP_SCREEN_HEIGHT) || defined(GDISP_SCREEN_HEIGHT)
|
|
#if GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_DIRECT
|
|
#warning "GDISP: This low level driver does not support setting a screen size. It is being ignored."
|
|
#elif GFX_COMPILER_WARNING_TYPE == GFX_COMPILER_WARNING_MACRO
|
|
COMPILER_WARNING("GDISP: This low level driver does not support setting a screen size. It is being ignored.")
|
|
#endif
|
|
#undef GDISP_SCREEN_WIDTH
|
|
#undef GDISP_SCREEN_HEIGHT
|
|
#endif
|
|
|
|
#define GDISP_DRIVER_VMT GDISPVMT_ILI9320
|
|
#include "gdisp_lld_config.h"
|
|
#include "../../../src/gdisp/gdisp_driver.h"
|
|
|
|
#include "board_ILI9320.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
#ifndef GDISP_SCREEN_HEIGHT
|
|
#define GDISP_SCREEN_HEIGHT 320
|
|
#endif
|
|
#ifndef GDISP_SCREEN_WIDTH
|
|
#define GDISP_SCREEN_WIDTH 240
|
|
#endif
|
|
#ifndef GDISP_INITIAL_CONTRAST
|
|
#define GDISP_INITIAL_CONTRAST 50
|
|
#endif
|
|
#ifndef GDISP_INITIAL_BACKLIGHT
|
|
#define GDISP_INITIAL_BACKLIGHT 100
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
#define dummy_read(g) { volatile gU16 dummy; dummy = read_data(g); (void) dummy; }
|
|
#define write_reg(g, reg, data) { write_index(g, reg); write_data(g, data); }
|
|
|
|
static void set_cursor(GDisplay *g) {
|
|
switch(g->g.Orientation) {
|
|
default:
|
|
case gOrientation0:
|
|
case gOrientation180:
|
|
write_reg(g, 0x20, g->p.x);
|
|
write_reg(g, 0x21, g->p.y);
|
|
break;
|
|
|
|
case gOrientation90:
|
|
case gOrientation270:
|
|
write_reg(g, 0x20, g->p.y);
|
|
write_reg(g, 0x21, g->p.x);
|
|
break;
|
|
}
|
|
write_index(g, 0x22);
|
|
}
|
|
|
|
static void set_viewport(GDisplay *g) {
|
|
switch(g->g.Orientation) {
|
|
default:
|
|
case gOrientation0:
|
|
case gOrientation180:
|
|
write_reg(g, 0x50, g->p.x);
|
|
write_reg(g, 0x51, g->p.x + g->p.cx - 1);
|
|
write_reg(g, 0x52, g->p.y);
|
|
write_reg(g, 0x53, g->p.y + g->p.cy - 1);
|
|
break;
|
|
|
|
case gOrientation90:
|
|
case gOrientation270:
|
|
write_reg(g, 0x50, g->p.y);
|
|
write_reg(g, 0x51, g->p.y + g->p.cy - 1);
|
|
write_reg(g, 0x52, g->p.x);
|
|
write_reg(g, 0x53, g->p.x + g->p.cx - 1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
LLDSPEC gBool gdisp_lld_init(GDisplay *g) {
|
|
gU16 cver;
|
|
|
|
// No private area for this controller
|
|
g->priv = 0;
|
|
|
|
// Initialise the board interface
|
|
init_board(g);
|
|
|
|
/* Hardware reset */
|
|
setpin_reset(g, gTrue);
|
|
gfxSleepMicroseconds(1000);
|
|
setpin_reset(g, gFalse);
|
|
gfxSleepMicroseconds(1000);
|
|
|
|
acquire_bus(g);
|
|
write_index(g, 0); // Get controller version
|
|
setreadmode(g);
|
|
dummy_read(g);
|
|
cver = read_data(g);
|
|
setwritemode(g);
|
|
write_reg(g, 0x00, 0x0001); //start Int. osc
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x01, 0x0100); //Set SS bit (shift direction of outputs is from S720 to S1)
|
|
write_reg(g, 0x02, 0x0700); //select the line inversion
|
|
write_reg(g, 0x03, 0x1038); //Entry mode(Horizontal : increment,Vertical : increment, AM=1)
|
|
write_reg(g, 0x04, 0x0000); //Resize control(No resizing)
|
|
write_reg(g, 0x08, 0x0202); //front and back porch 2 lines
|
|
write_reg(g, 0x09, 0x0000); //select normal scan
|
|
write_reg(g, 0x0A, 0x0000); //display control 4
|
|
write_reg(g, 0x0C, 0x0000); //system interface(2 transfer /pixel), internal sys clock,
|
|
write_reg(g, 0x0D, 0x0000); //Frame marker position
|
|
write_reg(g, 0x0F, 0x0000); //selects clk, enable and sync signal polarity,
|
|
write_reg(g, 0x10, 0x0000); //
|
|
write_reg(g, 0x11, 0x0000); //power control 2 reference voltages = 1:1,
|
|
write_reg(g, 0x12, 0x0000); //power control 3 VRH
|
|
write_reg(g, 0x13, 0x0000); //power control 4 VCOM amplitude
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x10, 0x17B0); //power control 1 BT,AP
|
|
write_reg(g, 0x11, 0x0137); //power control 2 DC,VC
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x12, 0x0139); //power control 3 VRH
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x13, 0x1d00); //power control 4 vcom amplitude
|
|
write_reg(g, 0x29, 0x0011); //power control 7 VCOMH
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x30, 0x0007);
|
|
write_reg(g, 0x31, 0x0403);
|
|
write_reg(g, 0x32, 0x0404);
|
|
write_reg(g, 0x35, 0x0002);
|
|
write_reg(g, 0x36, 0x0707);
|
|
write_reg(g, 0x37, 0x0606);
|
|
write_reg(g, 0x38, 0x0106);
|
|
write_reg(g, 0x39, 0x0007);
|
|
write_reg(g, 0x3c, 0x0700);
|
|
write_reg(g, 0x3d, 0x0707);
|
|
write_reg(g, 0x20, 0x0000); //starting Horizontal GRAM Address
|
|
write_reg(g, 0x21, 0x0000); //starting Vertical GRAM Address
|
|
write_reg(g, 0x50, 0x0000); //Horizontal GRAM Start Position
|
|
write_reg(g, 0x51, 0x00EF); //Horizontal GRAM end Position
|
|
write_reg(g, 0x52, 0x0000); //Vertical GRAM Start Position
|
|
write_reg(g, 0x53, 0x013F); //Vertical GRAM end Position
|
|
switch (cver) {
|
|
case 0x9320:
|
|
write_reg(g, 0x60, 0x2700); //starts scanning from G1, and 320 drive lines
|
|
break;
|
|
case 0x9325:
|
|
write_reg(g, 0x60, 0xA700); //starts scanning from G1, and 320 drive lines
|
|
break;
|
|
}
|
|
|
|
write_reg(g, 0x61, 0x0001); //fixed base display
|
|
write_reg(g, 0x6a, 0x0000); //no scroll
|
|
write_reg(g, 0x90, 0x0010); //set Clocks/Line =16, Internal Operation Clock Frequency=fosc/1,
|
|
write_reg(g, 0x92, 0x0000); //set gate output non-overlap period=0
|
|
write_reg(g, 0x93, 0x0003); //set Source Output Position=3
|
|
write_reg(g, 0x95, 0x0110); //RGB interface(Clocks per line period=16 clocks)
|
|
write_reg(g, 0x97, 0x0110); //set Gate Non-overlap Period 0 locksc
|
|
write_reg(g, 0x98, 0x0110); //
|
|
write_reg(g, 0x07, 0x0173); //display On
|
|
|
|
// Finish Init
|
|
post_init_board(g);
|
|
|
|
// Release the bus
|
|
release_bus(g);
|
|
|
|
// Turn on the backlight
|
|
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
|
|
|
|
/* Initialise the GDISP structure */
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Orientation = gOrientation0;
|
|
g->g.Powermode = gPowerOn;
|
|
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
|
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
|
return gTrue;
|
|
}
|
|
|
|
#if GDISP_HARDWARE_STREAM_WRITE
|
|
LLDSPEC void gdisp_lld_write_start(GDisplay *g) {
|
|
acquire_bus(g);
|
|
set_viewport(g);
|
|
#if !GDISP_HARDWARE_STREAM_POS
|
|
set_cursor(g);
|
|
#endif
|
|
}
|
|
LLDSPEC void gdisp_lld_write_color(GDisplay *g) {
|
|
write_data(g, gdispColor2Native(g->p.color));
|
|
}
|
|
LLDSPEC void gdisp_lld_write_stop(GDisplay *g) {
|
|
release_bus(g);
|
|
}
|
|
#if GDISP_HARDWARE_STREAM_POS
|
|
LLDSPEC void gdisp_lld_write_pos(GDisplay *g) {
|
|
set_cursor(g);
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#if GDISP_HARDWARE_STREAM_READ
|
|
LLDSPEC void gdisp_lld_read_start(GDisplay *g) {
|
|
acquire_bus(g);
|
|
set_viewport(g);
|
|
set_cursor(g);
|
|
setreadmode(g);
|
|
dummy_read(g);
|
|
}
|
|
LLDSPEC gColor gdisp_lld_read_color(GDisplay *g) {
|
|
gU16 data;
|
|
|
|
data = read_data(g);
|
|
return gdispNative2Color(data);
|
|
}
|
|
LLDSPEC void gdisp_lld_read_stop(GDisplay *g) {
|
|
setwritemode(g);
|
|
release_bus(g);
|
|
}
|
|
#endif
|
|
|
|
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
|
|
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
|
switch(g->p.x) {
|
|
case GDISP_CONTROL_POWER:
|
|
if (g->g.Powermode == (gPowermode)g->p.ptr)
|
|
return;
|
|
switch((gPowermode)g->p.ptr) {
|
|
case gPowerOff:
|
|
acquire_bus(g);
|
|
write_reg(g, 0x07, 0x0000);
|
|
write_reg(g, 0x10, 0x0000);
|
|
write_reg(g, 0x11, 0x0000);
|
|
write_reg(g, 0x12, 0x0000);
|
|
write_reg(g, 0x13, 0x0000);
|
|
release_bus(g);
|
|
|
|
set_backlight(g, 0);
|
|
break;
|
|
|
|
case gPowerOn:
|
|
//*************Power On sequence ******************//
|
|
acquire_bus(g);
|
|
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
|
|
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
|
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
|
|
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
|
|
gfxSleepMicroseconds(2000); /* Dis-charge capacitor power voltage */
|
|
write_reg(g, 0x10, 0x17B0); /* SAP, BT[3:0], AP, DSTB, SLP, STB */
|
|
write_reg(g, 0x11, 0x0147); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x12, 0x013C); /* VREG1OUT voltage */
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x13, 0x0E00); /* VDV[4:0] for VCOM amplitude */
|
|
write_reg(g, 0x29, 0x0009); /* VCM[4:0] for VCOMH */
|
|
gfxSleepMicroseconds(500);
|
|
write_reg(g, 0x07, 0x0173); /* 262K color and display ON */
|
|
release_bus(g);
|
|
|
|
set_backlight(g, g->g.Backlight);
|
|
break;
|
|
|
|
case gPowerSleep:
|
|
acquire_bus(g);
|
|
write_reg(g, 0x07, 0x0000); /* display OFF */
|
|
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
|
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
|
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
|
|
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
|
|
gfxSleepMicroseconds(2000); /* Dis-charge capacitor power voltage */
|
|
write_reg(g, 0x10, 0x0002); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
|
release_bus(g);
|
|
|
|
set_backlight(g, 0);
|
|
break;
|
|
|
|
case gPowerDeepSleep:
|
|
acquire_bus(g);
|
|
write_reg(g, 0x07, 0x0000); /* display OFF */
|
|
write_reg(g, 0x10, 0x0000); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
|
write_reg(g, 0x11, 0x0000); /* DC1[2:0], DC0[2:0], VC[2:0] */
|
|
write_reg(g, 0x12, 0x0000); /* VREG1OUT voltage */
|
|
write_reg(g, 0x13, 0x0000); /* VDV[4:0] for VCOM amplitude */
|
|
gfxSleepMicroseconds(2000); /* Dis-charge capacitor power voltage */
|
|
write_reg(g, 0x10, 0x0004); /* SAP, BT[3:0], APE, AP, DSTB, SLP */
|
|
release_bus(g);
|
|
|
|
set_backlight(g, 0);
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Powermode = (gPowermode)g->p.ptr;
|
|
return;
|
|
|
|
case GDISP_CONTROL_ORIENTATION:
|
|
if (g->g.Orientation == (gOrientation)g->p.ptr)
|
|
return;
|
|
switch((gOrientation)g->p.ptr) {
|
|
case gOrientation0:
|
|
acquire_bus(g);
|
|
write_reg(g, 0x01, 0x0100);
|
|
write_reg(g, 0x03, 0x1038);
|
|
write_reg(g, 0x60, 0x2700);
|
|
release_bus(g);
|
|
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
break;
|
|
|
|
case gOrientation90:
|
|
acquire_bus(g);
|
|
write_reg(g, 0x01, 0x0000);
|
|
write_reg(g, 0x03, 0x1030);
|
|
write_reg(g, 0x60, 0x2700);
|
|
release_bus(g);
|
|
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
|
break;
|
|
|
|
case gOrientation180:
|
|
acquire_bus(g);
|
|
write_reg(g, 0x01, 0x0000);
|
|
write_reg(g, 0x03, 0x1030);
|
|
write_reg(g, 0x60, 0x2700);
|
|
release_bus(g);
|
|
|
|
g->g.Height = GDISP_SCREEN_HEIGHT;
|
|
g->g.Width = GDISP_SCREEN_WIDTH;
|
|
break;
|
|
|
|
case gOrientation270:
|
|
acquire_bus(g);
|
|
write_reg(g, 0x01, 0x0100);
|
|
write_reg(g, 0x03, 0x1038);
|
|
write_reg(g, 0x60, 0xA700);
|
|
release_bus(g);
|
|
|
|
g->g.Height = GDISP_SCREEN_WIDTH;
|
|
g->g.Width = GDISP_SCREEN_HEIGHT;
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
g->g.Orientation = (gOrientation)g->p.ptr;
|
|
return;
|
|
|
|
case GDISP_CONTROL_BACKLIGHT:
|
|
if ((unsigned)g->p.ptr > 100)
|
|
g->p.ptr = (void *)100;
|
|
set_backlight(g, (unsigned)g->p.ptr);
|
|
g->g.Backlight = (unsigned)g->p.ptr;
|
|
return;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#endif /* GFX_USE_GDISP */
|