98 lines
2.2 KiB
C++
98 lines
2.2 KiB
C++
/*
|
|
* This sketch will remove the files and directories
|
|
* created by the SdFatMakeDir.pde sketch.
|
|
*
|
|
* Performance is erratic due to the large number
|
|
* of flash erase operations caused by many random
|
|
* writes to file structures.
|
|
*/
|
|
#include <SdFat.h>
|
|
#include <SdFatUtil.h>
|
|
|
|
const uint8_t SD_CHIP_SELECT = SS;
|
|
|
|
SdFat sd;
|
|
|
|
// store error strings in flash to save RAM
|
|
#define error(s) sd.errorHalt_P(PSTR(s))
|
|
|
|
/*
|
|
* remove all files in dir.
|
|
*/
|
|
void deleteFiles(SdBaseFile* dir) {
|
|
char name[13];
|
|
SdFile file;
|
|
|
|
// open and delete files
|
|
for (uint16_t n = 0; ; n++){
|
|
sprintf(name, "%u.TXT", n);
|
|
|
|
// open start time
|
|
uint32_t t0 = millis();
|
|
|
|
// assume done if open fails
|
|
if (!file.open(dir, name, O_WRITE)) return;
|
|
|
|
// open end time and remove start time
|
|
uint32_t t1 = millis();
|
|
if (!file.remove()) error("file.remove failed");
|
|
|
|
// remove end time
|
|
uint32_t t2 = millis();
|
|
|
|
PgmPrint("RM ");
|
|
Serial.print(n);
|
|
Serial.write(' ');
|
|
|
|
// open time
|
|
Serial.print(t1 - t0);
|
|
Serial.write(' ');
|
|
|
|
// remove time
|
|
Serial.println(t2 - t1);
|
|
}
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
while (!Serial) {} // wait for Leonardo
|
|
PgmPrintln("Type any character to start");
|
|
while (Serial.read() <= 0) {}
|
|
delay(200); // Catch Due reset problem
|
|
|
|
// initialize the SD card at SPI_FULL_SPEED for best performance.
|
|
// try SPI_HALF_SPEED if bus errors occur.
|
|
if (!sd.begin(SD_CHIP_SELECT, SPI_FULL_SPEED)) sd.initErrorHalt();
|
|
|
|
|
|
// delete files in root if FAT32
|
|
if (sd.vol()->fatType() == 32) {
|
|
PgmPrintln("Remove files in root");
|
|
deleteFiles(sd.vwd());
|
|
}
|
|
|
|
// open SUB1 and delete files
|
|
SdFile sub1;
|
|
if (!sub1.open("SUB1", O_READ)) error("open SUB1 failed");
|
|
PgmPrintln("Remove files in SUB1");
|
|
deleteFiles(&sub1);
|
|
|
|
// open SUB2 and delete files
|
|
SdFile sub2;
|
|
if (!sub2.open(&sub1, "SUB2", O_READ)) error("open SUB2 failed");
|
|
PgmPrintln("Remove files in SUB2");
|
|
deleteFiles(&sub2);
|
|
|
|
// remove SUB2
|
|
if (!sub2.rmDir()) error("sub2.rmDir failed");
|
|
PgmPrintln("SUB2 removed");
|
|
|
|
// remove SUB1
|
|
if (!sub1.rmDir()) error("sub1.rmDir failed");
|
|
PgmPrintln("SUB1 removed");
|
|
|
|
PgmPrintln("Done");
|
|
}
|
|
|
|
void loop() { }
|