# Controller

A debug console and configuration shield for serial TTL muxers. See the ```muxers``` folder for what connects to this shield.

## Hardware / BoM

| Item | Quantity | Unit Cost |
| ---- | -------- | --------- |
| [Keyboard FeatherWing (Keyboard + LCD)](https://www.tindie.com/products/arturo182/keyboard-featherwing-qwerty-keyboard-26-lcd/) | 1 | $55.00 |
| [Feather nRF52840 Express](https://www.adafruit.com/product/4062) | 1 | $24.95 |

## Libraries Used

### Local

These librarires are used by the project and contained in the ```src/``` folder local to the project.

- [GUIslice](https://github.com/ImpulseAdventure/GUIslice)

### External

These libraries are used by the project and can be installed via the Arduino IDE library manager.

- [CircularBuffer](https://github.com/rlogiacco/CircularBuffer)
- [bbq10keyboard](https://github.com/arturo182/arduino_bbq10kbd)
- [Adafruit_ILI9341](https://github.com/adafruit/Adafruit_ILI9341)
- [Adafruit_NeoPixel](https://github.com/adafruit/Adafruit_NeoPixel)

## Hardware Docs

- [https://www.solder.party/docs/keyboard-featherwing/downloads/](https://www.solder.party/docs/keyboard-featherwing/downloads/)
- [https://github.com/arturo182/bbq10kbd_i2c_sw](https://github.com/arturo182/bbq10kbd_i2c_sw)
- [https://github.com/lvgl/lv_arduino](https://github.com/lvgl/lv_arduino)

## Implementation (Incomplete)

- Startup shows connection setup + waits for OK prompt via main hat switch
- Status bar @ top with selected uart, selected speed
- Simple display of serial in/out via lcd
- Button for accessing symbols via pop-up list that aren't on keyboard
- Bccessing a uart selection pop-up that maps to rpi uarts
- Button for accessing password selection pop-up to help with password entry over serial
- Button for accessing uart speed pop-up to help with configuring line speeds
- Way to display pinouts stored on micro sd card
- Configuration read from muxes (if attached)

## Implementation (Complete)

- Battery level on feather neopixel (green = >80% ; yellow >=40% ; orange >= 25% ; red < 25%)
- User LED (red) always on when feather is running
- Battery level shown as progress bar in the upper right corner of the screen

## Building / Uploading

The ```make.ps1```, ```build.ps1``` and ```upload.ps1``` scripts can be used to build/upload this project. These scripts call the ```arduino-cli``` commands programatically.