#ifndef _GUISLICE_CONFIG_H_ #define _GUISLICE_CONFIG_H_ // ======================================================================= // GUIslice library (user configuration) selection by device // - Calvin Hass // - https://www.impulseadventure.com/elec/guislice-gui.html // - https://github.com/ImpulseAdventure/GUIslice // ======================================================================= // // The MIT License // // Copyright 2016-2020 Calvin Hass // // Permission is hereby granted, free of charge, to any person obtaining a copy // of this software and associated documentation files (the "Software"), to deal // in the Software without restriction, including without limitation the rights // to use, copy, modify, merge, publish, distribute, sublicense, and/or sell // copies of the Software, and to permit persons to whom the Software is // furnished to do so, subject to the following conditions: // // The above copyright notice and this permission notice shall be included in // all copies or substantial portions of the Software. // // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR // IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, // FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE // AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER // LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, // OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN // THE SOFTWARE. // // ======================================================================= // \file GUIslice_config.h #ifdef __cplusplus extern "C" { #endif // __cplusplus // ========================================================================================= // SELECT ONE OF THE FOLLOWING EXAMPLE CONFIGURATIONS OR ADD YOUR OWN // - Uncomment one of the following lines // - These example configurations are located in the /configs folder // - To add your own, make a copy of an example config, rename it // and add it to the list here. // - If no line is uncommented, then the default combined configuration // file will be used, ie. GUIslice_config_ard.h / GUIslice_config_linux.h // which is selected at the bottom of this file // - Refer to https://github.com/ImpulseAdventure/GUIslice/wiki/Display-Config-Table // to help identify a suitable config for your MCU shield / display // - Multiple configurations can be supported using the method described here: // https://github.com/ImpulseAdventure/GUIslice/wiki/Arduino-Multiple-Configs // ========================================================================================= // ========================================================================================= // IMPORTANT: Ensure you backup any custom config files before updating GUIslice! // The Arduino IDE deletes all files within the library when updating // ========================================================================================= // --------------------------------------------------------------------------------------- // Add your own configs here: // --------------------------------------------------------------------------------------- //#include "../configs/my-config.h" // --------------------------------------------------------------------------------------- // Example configs included in library /configs: // --------------------------------------------------------------------------------------- // Arduino, ARM SAMD, Cortex M0/M4, nRF52: // ------------------------------------------------------ //#include "../configs/ard-shld-adafruit_18_joy.h" //#include "../configs/ard-shld-adafruit_28_cap.h" //#include "../configs/ard-shld-adafruit_28_res.h" //#include "../configs/ard-shld-eastrising_50_ra8875_res.h" //#include "../configs/ard-shld-eastrising_50_ra8875_sumo_res.h" //#include "../configs/ard-shld-eastrising_50_ssd1963_res.h" //#include "../configs/ard-shld-eastrising_70_ra8876_gv.h" //#include "../configs/ard-shld-elegoo_28_res.h" //#include "../configs/ard-shld-generic1_35_touch.h" //#include "../configs/ard-shld-gevino_tft.h" //#include "../configs/ard-shld-ili9341_16b_touch.h" //#include "../configs/ard-shld-mcufriend.h" //#include "../configs/ard-shld-mcufriend_4wire.h" //#include "../configs/ard-shld-mcufriend_xpt2046.h" //#include "../configs/ard-shld-osmart_22_68130_touch.h" //#include "../configs/ard-shld-waveshare_28_touch.h" //#include "../configs/ard-shld-waveshare_40_notouch.h" //#include "../configs/ard-shld-waveshare_40_xpt2046.h" //#include "../configs/ard-adagfx-hx8347-xpt2046.h" //#include "../configs/ard-adagfx-hx8357-ft6206.h" //#include "../configs/ard-adagfx-hx8357-notouch.h" //#include "../configs/ard-adagfx-hx8357-simple.h" //#include "../configs/ard-adagfx-hx8357-stmpe610.h" //#include "../configs/ard-adagfx-ili9341-ft6206.h" //#include "../configs/ard-adagfx-ili9341-input.h" //#include "../configs/ard-adagfx-ili9341-notouch.h" //#include "../configs/ard-adagfx-ili9341-simple.h" //#include "../configs/ard-adagfx-ili9341-stmpe610.h" //#include "../configs/ard-adagfx-ili9341-xpt2046.h" //#include "../configs/ard-adagfx-pcd8544-notouch.h" //#include "../configs/ard-adagfx-ra8875-notouch.h" //#include "../configs/ard-adagfx-ra8876-notouch.h" //#include "../configs/ard-adagfx-ra8876-ft5206.h" //#include "../configs/ard-adagfx-ssd1306-notouch.h" //#include "../configs/ard-adagfx-st7735-notouch.h" //#include "../configs/due-adagfx-ili9341-ft6206.h" //#include "../configs/due-adagfx-ili9341-urtouch.h" // ESP8266, ESP32, M5stack, TTGO: // ------------------------------------------------------ //#include "../configs/esp-shld-m5stack.h" //#include "../configs/esp-shld-ttgo_btc_ticker.h" //#include "../configs/esp-tftespi-default-ft6206.h" //#include "../configs/esp-tftespi-default-notouch.h" //#include "../configs/esp-tftespi-default-simple.h" //#include "../configs/esp-tftespi-default-stmpe610.h" //#include "../configs/esp-tftespi-default-xpt2046.h" //#include "../configs/esp-tftespi-default-xpt2046_int.h" // Teensy: // ------------------------------------------------------ //#include "../configs/teensy-adagfx-ili9341-xpt2046.h" //#include "../configs/teensy-adagfx-ili9341-xpt2046-audio.h" //#include "../configs/teensy-adagfx-ili9341_t3-xpt2046.h" //#include "../configs/teensy-adagfx-ili9341_t3-xpt2046-audio.h" // STM32: // ------------------------------------------------------ //#include "../configs/stm32-adagfx-mcufriend-notouch.h" //#include "../configs/stm32-adagfx-mcufriend-simple.h" // Multi-device shields: // ------------------------------------------------------ //#include "../configs/mult-shld-adafruit_24_feather_touch.h" //#include "../configs/mult-shld-adafruit_35_feather_touch.h" // Raspberry Pi / LINUX: // ------------------------------------------------------ //#include "../configs/rpi-sdl1-default-tslib.h" //#include "../configs/rpi-sdl1-default-sdl.h" //#include "../configs/linux-sdl1-default-mouse.h" // ========================================================================================= // DETECT DEVICE PLATFORM // ========================================================================================= // Detect device platform // #if defined(__linux__) // #define GSLC_CFG_LINUX // #elif defined(__AVR__) && !defined(TEENSYDUINO) // // Note: Teensy 2 also defines __AVR__, so differentiate with TEENSYDUINO // #define GSLC_CFG_ARD // #elif defined(ARDUINO_SAMD_ZERO) // #define GSLC_CFG_ARD // #elif defined(ESP8266) || defined(ESP32) // #define GSLC_CFG_ARD // #elif defined(NRF52) // #define GSLC_CFG_ARD // #elif defined(ARDUINO_STM32_FEATHER) || defined(__STM32F1__) // #define GSLC_CFG_ARD // #elif defined(ARDUINO_ARCH_STM32) // ST Core from STMicroelectronics // #define GSLC_CFG_ARD // #elif defined(ARDUINO_ARCH_SAM) // Arduino Due // #define GSLC_CFG_ARD // #elif defined(ARDUINO_ARCH_SAMD) // M0_PRO // #define GSLC_CFG_ARD // #elif defined(__AVR__) && defined(TEENSYDUINO) // Teensy 2 // #define GSLC_DEV_TEENSY_2 // #define GSLC_CFG_ARD // #elif defined(__MKL26Z64__) // Teensy LC // #define GSLC_CFG_ARD // #define GSLC_DEV_TEENSY_LC // #elif defined(__MK20DX256__) // Teensy 3.2 // #define GSLC_CFG_ARD // #define GSLC_DEV_TEENSY_3_2 // #elif defined(__MK64FX512__) // Teensy 3.5 // #define GSLC_CFG_ARD // #define GSLC_DEV_TEENSY_3_5 // #elif defined(__MK66FX1M0__) // Teensy 3.6 // #define GSLC_CFG_ARD // #define GSLC_DEV_TEENSY_3_6 // #elif defined(__MK66FX1M0__) // Teensy 3.6 // #define GSLC_CFG_ARD // #define GSLC_DEV_TEENSY_3_6 // #elif defined(__IMXRT1062__) // #define GSLC_CFG_ARD // #define GSLC_DEV_TEENSY_4_0 // #else // #warning Unknown // #error "Unknown device platform" // #endif // Adafruit nRF52840 Feather #include "ard-adagfx-ili9341-stmpe610.h" // #include "ard-adagfx-ili9341-notouch.h" #define GSLC_CFG_ARD // ========================================================================================= // DEFAULT COMBINED CONFIGURATION FILE // - If no user configuration has been selected, a default config will be selected here // - Note that the include guard _GUISLICE_CONFIG_ARD_H_ and _GUISLICE_CONFIG_LINUX_H_ // will prevent these from loading if any of the user configs have been loaded // ========================================================================================= #if defined(GSLC_CFG_LINUX) #include "GUIslice_config_linux.h" #elif defined(GSLC_CFG_ARD) #include "GUIslice_config_ard.h" #endif // ----------------------------------------------------------------------------------------- #ifdef __cplusplus } #endif // __cplusplus #endif // _GUISLICE_CONFIG_H_