Tie in keyboard handling ; refactor to be easier to read

serial_debugger.ino

@@ -5,6 +5,7 @@
 #include <Adafruit_NeoPixel.h>
 #include <Adafruit_GFX.h>
 #include <Adafruit_ILI9341.h>
+#include <BBQ10Keyboard.h>
 
 // Debugging via serial monitor (don't turn this on unless you're hacking on the firmware code)
 #define DEBUG true
@@ -22,9 +23,28 @@ Adafruit_ILI9341 tft(TFT_CS, TFT_DC);
 #define CHARS_HORIZONTAL 28
 #define CHARS_ROWS 13
 
+// Keyboard
+BBQ10Keyboard keyboard;
+#define KBD_BTN_1 0x06
+#define KBD_BTN_2 0x11
+#define KBD_BTN_3 0x07
+#define KBD_BTN_4 0x12
+#define KBD_SW_UP 0x01
+#define KBD_SW_DN 0x02
+#define KBD_SW_LF 0x03
+#define KBD_SW_RT 0x04
+#define KBD_SW_OK 0x05
+
 // NeoPixels
-#define NUMPIXELS 1
-Adafruit_NeoPixel pixels(NUMPIXELS, PIN_NEOPIXEL, NEO_GRB + NEO_KHZ800);
+#define PIXELS_NUM_BOARD 1
+#define PIXELS_NUM_WING 1
+#define PIXELS_WING_PIN 11
+Adafruit_NeoPixel pixels_board(PIXELS_NUM_BOARD, PIN_NEOPIXEL, NEO_GRB + NEO_KHZ800);
+Adafruit_NeoPixel pixels_wing(PIXELS_NUM_WING, PIXELS_WING_PIN, NEO_GRB + NEO_KHZ800);
+
+// Various loop handlers
+void handlerKeyboard();
+void handlerBatteryLevel();
 
 // UI screens
 void screenClear();
@@ -34,22 +54,29 @@ uint16_t RGB565(uint8_t r, uint8_t g, uint8_t b) {
   return ((r & 0b11111000) << 8) | ((g & 0b11111100) << 3) | (b >> 3);
 }
 
+// Various things that need to be setup via the Arduino standard methods
 void setup() {
   // Setup red LED to indicate device is on (in case we disable NeoPixel battery level later)
   pinMode(3, OUTPUT);
   digitalWrite(3, HIGH);
 
   // Setup NeoPixels
-  pixels.begin();
-  pixels.clear();
-  pixels.setBrightness(10);
+  pixels_board.begin();
+  pixels_wing.begin();
+  pixels_board.clear();
+  pixels_wing.clear();
+  pixels_board.setBrightness(10);
+  pixels_wing.setBrightness(5);
+
+  // Start with blank wing indicator
+  pixels_wing.show();
 
   // Green : pixels.Color(0, 255, 0)
   // Yellow : pixels.Color(255, 255, 0)
   // Orange : pixels.Color(255, 128, 0)
   // Red : pixels.Color(255, 0, 0)
-  pixels.setPixelColor(0, pixels.Color(0, 0, 0));
-  pixels.show();
+  pixels_board.setPixelColor(0, pixels_board.Color(0, 0, 255));
+  pixels_board.show();
 
   // Setup TFT
   tft.begin();
@@ -57,40 +84,66 @@ void setup() {
   screenClear();
   tft.println("");
   tft.setFont(&FreeMono9pt7b);
+
+  // Setup BBQ10Keyboard
+  Wire.begin();
+  keyboard.begin();
+  keyboard.setBacklight(0.5f);
+}
+
+// Main program via the Arduino standard methods
+void loop() {
+  // Handle keyboard events
+  handlerKeyboard();
+
+  // Update battery level as appropriate
+  handlerBatteryLevel();
+}
+
+void handlerKeyboard() {
+  // Check if keys were pressed
+  if (keyboard.keyCount()) {
+    // Get keyboard event
+    const BBQ10Keyboard::KeyEvent key = keyboard.keyEvent();
+
+    // Pick color for signaling a key was pressed (short or long press)
+    uint32_t keyboard_pixel_color = pixels_wing.Color(0, 0, 255);
+    if (key.state == BBQ10Keyboard::StateLongPress) {
+      keyboard_pixel_color = pixels_wing.Color(0, 255, 255);
+    }
+  
+    // Display indicator accordingly
+    if (key.state == BBQ10Keyboard::StatePress || key.state == BBQ10Keyboard::StateLongPress) {
+      pixels_wing.setPixelColor(0, keyboard_pixel_color);
+      pixels_wing.show(); 
+    } 
+    else {
+      pixels_wing.clear();
+      pixels_wing.show();
+    }
+  }
 }
 
 // Measure battery level and change NeoPixel accordingly
-void batteryLevel() {
+void handlerBatteryLevel() {
   measuredVBat = analogRead(VBATPIN);
   measuredVBat *= 2;    // we divided by 2, so multiply back
   measuredVBat *= 3.3;  // Multiply by 3.3V, our reference voltage
   measuredVBat /= 1024; // convert to voltage
   batteryPercent = measuredVBat / 3.3;
   if (batteryPercent >= 0.75) {
-    pixels.setPixelColor(0, pixels.Color(0, 255, 0));
+    pixels_board.setPixelColor(0, pixels_board.Color(0, 255, 0));
   }
   else if (batteryPercent >= 0.50) {
-    pixels.setPixelColor(0, pixels.Color(255, 255, 0));
+    pixels_board.setPixelColor(0, pixels_board.Color(255, 255, 0));
   }
   else if (batteryPercent >= 0.25) {
-    pixels.setPixelColor(0, pixels.Color(255, 128, 0));
+    pixels_board.setPixelColor(0, pixels_board.Color(255, 128, 0));
   }
   else {
-    pixels.setPixelColor(0, pixels.Color(255, 0, 0));
+    pixels_board.setPixelColor(0, pixels_board.Color(255, 0, 0));
   }
-  pixels.show();
-
-  if (DEBUG) {
-    Serial.print("VBat: " ); Serial.println(measuredVBat);
-    Serial.print("Bat %: "); Serial.println(batteryPercent);
-  }
-}
-
-void loop() {
-  // Update battery level as appropriate
-  batteryLevel();
-  
-  delay(250);
+  pixels_board.show();
 }
 
 // Clear the screen