2020-09-09 23:36:39 +00:00
# Controller
A debug console and configuration shield for serial TTL muxers. See the ```muxers``` folder for what connects to this shield.
## Hardware / BoM
| Item | Quantity | Unit Cost |
| ---- | -------- | --------- |
| [Keyboard FeatherWing (Keyboard + LCD) ](https://www.tindie.com/products/arturo182/keyboard-featherwing-qwerty-keyboard-26-lcd/ ) | 1 | $55.00 |
| [Feather nRF52840 Express ](https://www.adafruit.com/product/4062 ) | 1 | $24.95 |
2020-09-10 22:51:29 +00:00
## Libraries Used
### Local
These librarires are used by the project and contained in the ```src/``` folder local to the project.
2020-09-12 20:51:56 +00:00
- [GUIslice 0.15 ](https://github.com/ImpulseAdventure/GUIslice )
- [SdFat 1.1.4 ](https://github.com/greiman/SdFat )
2020-09-10 22:51:29 +00:00
### External
These libraries are used by the project and can be installed via the Arduino IDE library manager.
- [CircularBuffer ](https://github.com/rlogiacco/CircularBuffer )
2020-09-10 23:37:04 +00:00
- [bbq10keyboard ](https://github.com/arturo182/arduino_bbq10kbd )
2020-09-10 22:51:29 +00:00
- [Adafruit_ILI9341 ](https://github.com/adafruit/Adafruit_ILI9341 )
- [Adafruit_NeoPixel ](https://github.com/adafruit/Adafruit_NeoPixel )
2020-09-09 23:36:39 +00:00
## Hardware Docs
- [https://www.solder.party/docs/keyboard-featherwing/downloads/ ](https://www.solder.party/docs/keyboard-featherwing/downloads/ )
- [https://github.com/arturo182/bbq10kbd_i2c_sw ](https://github.com/arturo182/bbq10kbd_i2c_sw )
- [https://github.com/lvgl/lv_arduino ](https://github.com/lvgl/lv_arduino )
## Implementation (Incomplete)
- Simple display of serial in/out via lcd
2020-09-13 07:45:52 +00:00
- Button for accessing symbols and control sequences via pop-up list that aren't on keyboard
2020-09-09 23:36:39 +00:00
- Button for accessing password selection pop-up to help with password entry over serial
2020-09-13 07:45:52 +00:00
- This should be configured via a text file on the sd card
2020-09-09 23:36:39 +00:00
- Way to display pinouts stored on micro sd card
2020-09-28 05:24:13 +00:00
- **YOU WILL NEED TO UPDATE THE CODE TO ADD NEW IMAGES**
2020-09-28 03:33:35 +00:00
- Max number of files is 20
- Max filename length is 24 (this includes the ```.``` and extension of the file)
- The pinouts should be stored as bmp files *up to* 24 bit
- Pinouts should be sized as close to 320x240 as possible
- Pinouts should be stored at ```/pinouts``` on the root of the SD card
2020-09-09 23:36:39 +00:00
- Configuration read from muxes (if attached)
## Implementation (Complete)
- Battery level on feather neopixel (green = >80% ; yellow >=40% ; orange >= 25% ; red < 25 %)
- User LED (red) always on when feather is running
- Battery level shown as progress bar in the upper right corner of the screen
2020-09-13 07:45:52 +00:00
- Config screen for Raspberry Pi UART/Speed
- SD card support (REQUIRED actually)
- SD Card information screen
- Keyboard setup
- 5 way switch for UI navigation instead of touch screen
- Button 4 as a way to switch between screens
2020-09-09 23:36:39 +00:00
## Building / Uploading
The ```make.ps1```, ```build.ps1``` and ```upload.ps1``` scripts can be used to build/upload this project. These scripts call the ```arduino-cli``` commands programatically.
