From 2c57900fc8edee2196cfbf22ebf1918372de9478 Mon Sep 17 00:00:00 2001 From: KemoNine Date: Wed, 8 Aug 2018 11:42:20 -0400 Subject: [PATCH] Update armbian download links for our custom builds/download site --- README.md | 1 + for-beginners.md | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index eedc2e9..3148e45 100644 --- a/README.md +++ b/README.md @@ -14,6 +14,7 @@ The Lollipop Cloud project is a way to self-host internet services, such as a we [Setup For Beginners (link)](for-beginners.md): If you are new to installing Linux, or would like a little extra help walking through the initial creation of your Lollipop, please take a look our documentation written especially for beginners. Then skip down to the next section ([Networking](#Networking)) when you're ready. If you're not using the [link for beginners](for-beginners.md), the following links are good first steps: +* [Download Armbian (link)](https://dl.lollipopcloud.solutions/files/armbian) * [First Boot (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/armbian/first_boot.md) * [Base Setup (link)](https://git.lollipopcloud.solutions/lollipop-cloud/docs/src/branch/master/armbian/base_setup.md) diff --git a/for-beginners.md b/for-beginners.md index b7fbca3..1b03b98 100644 --- a/for-beginners.md +++ b/for-beginners.md @@ -14,7 +14,7 @@ You will also need an SD card formatted with Armbian installed. __NOTE:__ Raspberry Pi 3 users will need to use [Raspbian (link)](https://www.raspberrypi.org/downloads/raspbian/) instead of Armbian. -You will need to [download Armbian (link)](https://www.armbian.com/download/) for the board you're setting up, and save it to your computer. We highly recommend using an HDMI connection if you've never set up a serial connection before, because additional drivers and software are required to get your development computer to communicate with the Lollipop via serial connection. Your "development computer" will be the laptop or desktop computer you use daily, or have borrowed for this purpose. +You will need to [download Armbian (link)](https://dl.lollipopcloud.solutions/files/armbian) for the board you're setting up, and save it to your computer. We highly recommend using an HDMI connection if you've never set up a serial connection before, because additional drivers and software are required to get your development computer to communicate with the Lollipop via serial connection. Your "development computer" will be the laptop or desktop computer you use daily, or have borrowed for this purpose. __NOTE:__ experienced users might want to use the experimental versions, but the rest of us should stick to the supported and stable builds.