58 lines
1.9 KiB
Python
58 lines
1.9 KiB
Python
print('START boot.py')
|
|
|
|
# Used http://kmkfw.ioy/docs/boot/ as starting point
|
|
|
|
import os
|
|
|
|
# Enable use w/ BIOS
|
|
if os.getenv('ARDUX_KMK_DEBUGGING'):
|
|
print('START bios hid enable')
|
|
import usb_hid
|
|
from usb_hid import Device
|
|
usb_hid.enable((Device.KEYBOARD, Device.MOUSE), boot_device=1)
|
|
if os.getenv('ARDUX_KMK_DEBUGGING'):
|
|
print('END bios hid enable')
|
|
|
|
# Print env vars if debugging enabled
|
|
if os.getenv('ARDUX_KMK_DEBUGGING'):
|
|
print('debugging enabled')
|
|
print('START env')
|
|
print('CIRCUITPY_BLE_NAME:', os.getenv('CIRCUITPY_BLE_NAME'))
|
|
print('ARDUX_KMK_DEBUGGING:', os.getenv('ARDUX_KMK_DEBUGGING'))
|
|
print('ARDUX_KMK_USB_DISK_ALWAYS:', os.getenv('ARDUX_KMK_USB_DISK_ALWAYS'))
|
|
print('ARDUX_SIZE:', os.getenv('ARDUX_SIZE'))
|
|
print('ARDUX_HAND:', os.getenv('ARDUX_HAND'))
|
|
print('ARDUX_BOARD:', os.getenv('ARDUX_BOARD'))
|
|
print('END env')
|
|
else:
|
|
print('debugging disabled')
|
|
|
|
# If this key is held during boot, don't run the code which hides the storage and disables serial
|
|
# bottom row, index finger key / bottom row pinky key
|
|
import digitalio
|
|
from kmk.quickpin.pro_micro.kb2040 import pinout as pins
|
|
key_1 = digitalio.DigitalInOut(pins[12])
|
|
key_2 = digitalio.DigitalInOut(pins[15])
|
|
|
|
# Configure gpio for boot
|
|
key_1.switch_to_input(pull=digitalio.Pull.UP)
|
|
key_2.switch_to_input(pull=digitalio.Pull.UP)
|
|
|
|
# Pull up means 'active low' so invert pin values for positive logic below
|
|
key_1_val = not (key_1.value)
|
|
key_2_val = not (key_2.value)
|
|
|
|
# Check for key hold and disable any dangerous features
|
|
if not (key_1_val or key_2_val) and not os.getenv('ARDUX_KMK_DEBUGGING'):
|
|
if not os.getenv('ARDUX_KMK_USB_DISK_ALWAYS'):
|
|
import storage
|
|
storage.disable_usb_drive()
|
|
import usb_cdc
|
|
usb_cdc.disable() # Equivalent to usb_cdc.enable(console=False, data=False)
|
|
|
|
# Deinit pins so they can be setup per the kmk keymap post-boot
|
|
key_1.deinit()
|
|
key_2.deinit()
|
|
|
|
print('END boot.py')
|