keyboard/qmk/lib/vusb/examples/drivertest/firmware/main.c

129 lines
3.9 KiB
C

/* Name: main.c
* Project: hid-custom-rq example
* Author: Christian Starkjohann
* Creation Date: 2008-04-07
* Tabsize: 4
* Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
*/
/*
This example should run on most AVRs with only little changes. No special
hardware resources except INT0 are used. You may have to change usbconfig.h for
different I/O pins for USB. Please note that USB D+ must be the INT0 pin, or
at least be connected to INT0 as well.
*/
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/interrupt.h> /* for sei() */
#include <util/delay.h> /* for _delay_ms() */
#include <avr/pgmspace.h> /* required by usbdrv.h */
#include "usbdrv.h"
#include "oddebug.h" /* This is also an example for using debug macros */
#include "requests.h" /* The custom request numbers we use */
#if TUNE_OSCCAL
uchar lastTimer0Value;
#endif
#if CALIBRATE_OSCCAL
#include "osccal.c"
#endif
/* ------------------------------------------------------------------------- */
/* ----------------------------- USB interface ----------------------------- */
/* ------------------------------------------------------------------------- */
static uchar dataBuffer[64];
static uchar writeIndex;
uchar usbFunctionWrite(uchar *data, uchar len)
{
if(writeIndex + len <= sizeof(dataBuffer)){
uchar i;
for(i = 0; i < len; i++){
dataBuffer[writeIndex++] = *data++;
}
}
return writeIndex >= sizeof(dataBuffer);
}
usbMsgLen_t usbFunctionSetup(uchar data[8])
{
usbRequest_t *rq = (void *)data;
DBG1(0x50, &rq->bRequest, 1); /* debug output: print our request */
if(rq->bRequest == CUSTOM_RQ_SET_DATA){
writeIndex = 0;
return USB_NO_MSG;
}else if(rq->bRequest == CUSTOM_RQ_GET_DATA){
usbMsgPtr = dataBuffer; /* tell the driver which data to return */
return sizeof(dataBuffer); /* tell the driver how many bytes to send */
}else if(rq->bRequest == CUSTOM_RQ_SET_OSCCAL){
OSCCAL = rq->wValue.bytes[0];
}else if(rq->bRequest == CUSTOM_RQ_GET_OSCCAL){
usbMsgPtr = (uchar *)&OSCCAL;
return 1;
}
return 0; /* default for not implemented requests: return no data back to host */
}
/* ------------------------------------------------------------------------- */
int __attribute__((noreturn)) main(void)
{
uchar i;
wdt_enable(WDTO_1S);
/* If you don't use the watchdog, replace the call above with a wdt_disable().
* On newer devices, the status of the watchdog (on/off, period) is PRESERVED
* OVER RESET!
*/
odDebugInit();
DBG1(0x00, 0, 0); /* debug output: main starts */
/* RESET status: all port bits are inputs without pull-up.
* That's the way we need D+ and D-. Therefore we don't need any
* additional hardware initialization.
*/
TCCR2 = 9 | (1 << COM20);
OCR2 = 3; /* should give F_CPU/8 clock */
DDRB = (1 << 2) | (1 << 3);
TCCR0 = 3; /* 1/64 prescaler */
usbInit();
usbDeviceDisconnect(); /* enforce re-enumeration, do this while interrupts are disabled! */
i = 0;
while(--i){ /* fake USB disconnect for > 250 ms */
wdt_reset();
_delay_ms(1);
}
usbDeviceConnect();
sei();
DBG1(0x01, 0, 0); /* debug output: main loop starts */
for(;;){ /* main event loop */
wdt_reset();
usbPoll();
cli(); /* disable interrupts for some cycles, use other cli as nop */
cli();
cli();
cli();
cli();
cli();
cli();
cli();
cli();
cli();
cli();
cli();
cli();
cli();
sei();
}
}
/* ------------------------------------------------------------------------- */