keyboard/qmk/lib/ugfx/drivers/ginput/toggle/Pal
2020-09-24 23:24:14 -04:00
..
driver.mk Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
ginput_lld_toggle_board_template.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
ginput_lld_toggle_config.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
ginput_lld_toggle_Pal.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.txt Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

To use this driver:

1. Add in your gfxconf.h:
	a)  #define GFX_USE_GINPUT		GFXON
		#define GINPUT_NEED_TOGGLE	GFXON
	d) If you are not using a known board then create a ginput_lld_toggle_board.h file
		and ensure it is on your include path.
		Use the ginput_lld_toggle_board_example.h file as a basis.
		Currently known boards are:
			Olimex SAM7-EX256

2. To your makefile add the following lines:
	include $(GFXLIB)/drivers/ginput/toggle/Pal/driver.mk