keyboard/qmk/lib/ugfx/boards/base/FireBull-STM32F103-FB/chibios_board/board.h

101 lines
2.9 KiB
C

#ifndef _BOARD_H_
#define _BOARD_H_
// Board identifier.
#define BOARD_FIREBULL_STM32_F103
#define BOARD_NAME "FireBull STM32F103-FB"
// Board frequencies.
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
// MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
#define STM32F10X_HD
// IO pins assignments.
#define GPIOA_BUTTON 8
#define GPIOD_LED1 8
#define GPIOD_LED2 9
#define GPIOD_LED3 10
#define GPIOD_LED4 11
#define GPIOA_SPI1NSS 4
#define GPIOB_SPI2NSS 12
#define GPIOA_SPI3NSS 15
#define GPIOA_MMCCP 4
#define GPIOC_SDPWR 8
#define GPIOC_USB_EN 9
#define TP_CS_PORT GPIOC
#define TP_IRQ_PORT GPIOC
#define TP_IRQ 4
#define TP_CS 6
#define GDISP_DATA_PORT GPIOE
#define GDISP_CMD_PORT GPIOD
#define GDISP_CS 12
#define GDISP_RS 13
#define GDISP_WR 14
#define GDISP_RD 15
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
#define VAL_GPIOACRL 0xB4B44B34 /* PA7...PA0 */
#define VAL_GPIOACRH 0x444334B4 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0xB4B88888 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
#define VAL_GPIOCCRL 0x33048888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88833383 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
#define VAL_GPIODCRL 0x33388888 /* PD7...PD0 */
#define VAL_GPIODCRH 0x33333333 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
#define VAL_GPIOECRL 0x33333333 /* PE7...PE0 */
#define VAL_GPIOECRH 0x33333333 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_EN)
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_EN)
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */