keyboard/qmk/lib/chibios/demos/AVR/TEST-SUITE-NIL
2020-09-24 23:24:14 -04:00
..
chconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
halconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
main.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
Makefile Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
mcuconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.txt Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

*****************************************************************************
** ChibiOS/NIL port for Atmel AVR ATmega2560.                              **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

One thread prints a message to the serial console, which is available on
the board USB connector (FT232 converter).

Another thread toggles the LED on PB7 (pin 13 on Arduino IDE) every 500ms.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.