kemonine/keyboard
kemonine/keyboard
1
0
Fork 0
Code Issues Pull requests Releases 2 Activity
keyboard/qmk/lib/chibios-contrib/testhal/KINETIS/FRDM-KL26Z/I2C
History
kemonine f7a73edb1f Add back qmk firmware that's been updated for kemonine setups
2020-09-24 23:24:14 -04:00
..
chconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
halconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
halconf_community.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
main.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
Makefile Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
mcuconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.txt Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

readme.txt 

*********************************************************************
** ChibiOS/RT I2C test demo for Freedom Board KL26Z.               **
*********************************************************************

** TARGET **

The test runs on an Freescale Freedom KL26Z board.

** The Demo **

This test tries to access the onboard FXOS8700CQ chip using the I2C bus.
It sends the command WHO_AM_I which has a standard answer that can be
verified. If the correct answer is received the GREEN led will blink.
If no answer or invalid answer is received the RED led will blink.

** Build Procedure **

This test was built using the ARM GCC toolchain available at:

https://launchpad.net/gcc-arm-embedded