keyboard/qmk/lib/chibios-contrib/os/hal/boards/MICROBIT/board.c

92 lines
3.8 KiB
C

/*
Copyright (C) 2017 Stéphane D'Alu
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "hal.h"
#if HAL_USE_PAL || defined(__DOXYGEN__)
/* RAM Banks
* (Values are defined in Nordic gcc_startup_nrf51.s)
*/
#define NRF_POWER_RAMON_ADDRESS 0x40000524
#define NRF_POWER_RAMONB_ADDRESS 0x40000554
#define NRF_POWER_RAMONx_RAMxON_ONMODE_Msk 0x3
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
const PALConfig pal_default_config =
{
.pads = {
PAL_MODE_OUTPUT_OPENDRAIN, /* P0.0 : SCL P19 */
PAL_MODE_UNCONNECTED, /* P0.1 : PAD1 P2 */
PAL_MODE_UNCONNECTED, /* P0.2 : PAD2 P1 */
PAL_MODE_UNCONNECTED, /* P0.3 : PAD3 P0 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.4 : COL1 P3 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.5 : COL2 P4 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.6 : COL3 P10 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.7 : COL4 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.8 : COL5 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.9 : COL6 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.10: COL7 P9 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.11: COL8 P7 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.12: COL9 P6 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.13: ROW1 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.14: ROW2 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.15: ROW3 */
PAL_MODE_UNCONNECTED, /* P0.16 P16 */
PAL_MODE_INPUT, /* P0.17: BTN_A P5 */
PAL_MODE_UNCONNECTED, /* P0.18 P8 */
PAL_MODE_INPUT, /* P0.19: BTN_RST */
PAL_MODE_UNCONNECTED, /* P0.20 P12 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.21: SPI_MOSI P15 */
PAL_MODE_INPUT_PULLUP, /* P0.22: SPI_MISO P14 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.23: SPI_SCK P13 */
PAL_MODE_OUTPUT_PUSHPULL, /* P0.24: UART_TX */
PAL_MODE_INPUT_PULLUP, /* P0.25: UART_RX */
PAL_MODE_INPUT, /* P0.26: BTN_B P11 */
PAL_MODE_INPUT, /* P0.27: ACC_INT2 */
PAL_MODE_INPUT, /* P0.28: ACC_INT1 */
PAL_MODE_INPUT, /* P0.29: MAG_INT1 */
PAL_MODE_OUTPUT_OPENDRAIN, /* P0.30: SDA P20 */
PAL_MODE_UNCONNECTED, /* P0.31 */
},
};
#endif
/**
* @brief Early initialization code.
* @details This initialization is performed just after reset before BSS and
* DATA segments initialization.
*/
void __early_init(void)
{
/* Make sure ALL RAM banks are powered on */
*(uint32_t *)NRF_POWER_RAMON_ADDRESS |= NRF_POWER_RAMONx_RAMxON_ONMODE_Msk;
*(uint32_t *)NRF_POWER_RAMONB_ADDRESS |= NRF_POWER_RAMONx_RAMxON_ONMODE_Msk;
}
/**
* @brief Late initialization code.
* @note This initialization is performed after BSS and DATA segments
* initialization and before invoking the main() function.
*/
void boardInit(void)
{
}