kemonine/keyboard
kemonine/keyboard
1
0
Fork 0
Code Issues Pull requests Releases 2 Activity
keyboard/qmk/lib/chibios-contrib/os/common/ext/TivaWare/inc/hw_sysctl.h

3750 lines
212 KiB
C
Raw Blame History

//*****************************************************************************
//
// hw_sysctl.h - Macros used when accessing the system control hardware.
//
// Copyright (c) 2005-2016 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.1.3.156 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_SYSCTL_H__
#define __HW_SYSCTL_H__
//*****************************************************************************
//
// The following are defines for the System Control register addresses.
//
//*****************************************************************************
#define SYSCTL_DID0 0x400FE000 // Device Identification 0
#define SYSCTL_DID1 0x400FE004 // Device Identification 1
#define SYSCTL_DC0 0x400FE008 // Device Capabilities 0
#define SYSCTL_DC1 0x400FE010 // Device Capabilities 1
#define SYSCTL_DC2 0x400FE014 // Device Capabilities 2
#define SYSCTL_DC3 0x400FE018 // Device Capabilities 3
#define SYSCTL_DC4 0x400FE01C // Device Capabilities 4
#define SYSCTL_DC5 0x400FE020 // Device Capabilities 5
#define SYSCTL_DC6 0x400FE024 // Device Capabilities 6
#define SYSCTL_DC7 0x400FE028 // Device Capabilities 7
#define SYSCTL_DC8 0x400FE02C // Device Capabilities 8
#define SYSCTL_PBORCTL 0x400FE030 // Brown-Out Reset Control
#define SYSCTL_PTBOCTL 0x400FE038 // Power-Temp Brown Out Control
#define SYSCTL_SRCR0 0x400FE040 // Software Reset Control 0
#define SYSCTL_SRCR1 0x400FE044 // Software Reset Control 1
#define SYSCTL_SRCR2 0x400FE048 // Software Reset Control 2
#define SYSCTL_RIS 0x400FE050 // Raw Interrupt Status
#define SYSCTL_IMC 0x400FE054 // Interrupt Mask Control
#define SYSCTL_MISC 0x400FE058 // Masked Interrupt Status and
// Clear
#define SYSCTL_RESC 0x400FE05C // Reset Cause
#define SYSCTL_PWRTC 0x400FE060 // Power-Temperature Cause
#define SYSCTL_RCC 0x400FE060 // Run-Mode Clock Configuration
#define SYSCTL_NMIC 0x400FE064 // NMI Cause Register
#define SYSCTL_GPIOHBCTL 0x400FE06C // GPIO High-Performance Bus
// Control
#define SYSCTL_RCC2 0x400FE070 // Run-Mode Clock Configuration 2
#define SYSCTL_MOSCCTL 0x400FE07C // Main Oscillator Control
#define SYSCTL_RSCLKCFG 0x400FE0B0 // Run and Sleep Mode Configuration
// Register
#define SYSCTL_MEMTIM0 0x400FE0C0 // Memory Timing Parameter Register
// 0 for Main Flash and EEPROM
#define SYSCTL_RCGC0 0x400FE100 // Run Mode Clock Gating Control
// Register 0
#define SYSCTL_RCGC1 0x400FE104 // Run Mode Clock Gating Control
// Register 1
#define SYSCTL_RCGC2 0x400FE108 // Run Mode Clock Gating Control
// Register 2
#define SYSCTL_SCGC0 0x400FE110 // Sleep Mode Clock Gating Control
// Register 0
#define SYSCTL_SCGC1 0x400FE114 // Sleep Mode Clock Gating Control
// Register 1
#define SYSCTL_SCGC2 0x400FE118 // Sleep Mode Clock Gating Control
// Register 2
#define SYSCTL_DCGC0 0x400FE120 // Deep Sleep Mode Clock Gating
// Control Register 0
#define SYSCTL_DCGC1 0x400FE124 // Deep-Sleep Mode Clock Gating
// Control Register 1
#define SYSCTL_DCGC2 0x400FE128 // Deep Sleep Mode Clock Gating
// Control Register 2
#define SYSCTL_ALTCLKCFG 0x400FE138 // Alternate Clock Configuration
#define SYSCTL_DSLPCLKCFG 0x400FE144 // Deep Sleep Clock Configuration
#define SYSCTL_DSCLKCFG 0x400FE144 // Deep Sleep Clock Configuration
// Register
#define SYSCTL_DIVSCLK 0x400FE148 // Divisor and Source Clock
// Configuration
#define SYSCTL_SYSPROP 0x400FE14C // System Properties
#define SYSCTL_PIOSCCAL 0x400FE150 // Precision Internal Oscillator
// Calibration
#define SYSCTL_PIOSCSTAT 0x400FE154 // Precision Internal Oscillator
// Statistics
#define SYSCTL_PLLFREQ0 0x400FE160 // PLL Frequency 0
#define SYSCTL_PLLFREQ1 0x400FE164 // PLL Frequency 1
#define SYSCTL_PLLSTAT 0x400FE168 // PLL Status
#define SYSCTL_SLPPWRCFG 0x400FE188 // Sleep Power Configuration
#define SYSCTL_DSLPPWRCFG 0x400FE18C // Deep-Sleep Power Configuration
#define SYSCTL_DC9 0x400FE190 // Device Capabilities 9
#define SYSCTL_NVMSTAT 0x400FE1A0 // Non-Volatile Memory Information
#define SYSCTL_LDOSPCTL 0x400FE1B4 // LDO Sleep Power Control
#define SYSCTL_LDODPCTL 0x400FE1BC // LDO Deep-Sleep Power Control
#define SYSCTL_RESBEHAVCTL 0x400FE1D8 // Reset Behavior Control Register
#define SYSCTL_HSSR 0x400FE1F4 // Hardware System Service Request
#define SYSCTL_USBPDS 0x400FE280 // USB Power Domain Status
#define SYSCTL_USBMPC 0x400FE284 // USB Memory Power Control
#define SYSCTL_EMACPDS 0x400FE288 // Ethernet MAC Power Domain Status
#define SYSCTL_EMACMPC 0x400FE28C // Ethernet MAC Memory Power
// Control
#define SYSCTL_LCDMPC 0x400FE294 // LCD Memory Power Control
#define SYSCTL_PPWD 0x400FE300 // Watchdog Timer Peripheral
// Present
#define SYSCTL_PPTIMER 0x400FE304 // 16/32-Bit General-Purpose Timer
// Peripheral Present
#define SYSCTL_PPGPIO 0x400FE308 // General-Purpose Input/Output
// Peripheral Present
#define SYSCTL_PPDMA 0x400FE30C // Micro Direct Memory Access
// Peripheral Present
#define SYSCTL_PPEPI 0x400FE310 // EPI Peripheral Present
#define SYSCTL_PPHIB 0x400FE314 // Hibernation Peripheral Present
#define SYSCTL_PPUART 0x400FE318 // Universal Asynchronous
// Receiver/Transmitter Peripheral
// Present
#define SYSCTL_PPSSI 0x400FE31C // Synchronous Serial Interface
// Peripheral Present
#define SYSCTL_PPI2C 0x400FE320 // Inter-Integrated Circuit
// Peripheral Present
#define SYSCTL_PPUSB 0x400FE328 // Universal Serial Bus Peripheral
// Present
#define SYSCTL_PPEPHY 0x400FE330 // Ethernet PHY Peripheral Present
#define SYSCTL_PPCAN 0x400FE334 // Controller Area Network
// Peripheral Present
#define SYSCTL_PPADC 0x400FE338 // Analog-to-Digital Converter
// Peripheral Present
#define SYSCTL_PPACMP 0x400FE33C // Analog Comparator Peripheral
// Present
#define SYSCTL_PPPWM 0x400FE340 // Pulse Width Modulator Peripheral
// Present
#define SYSCTL_PPQEI 0x400FE344 // Quadrature Encoder Interface
// Peripheral Present
#define SYSCTL_PPLPC 0x400FE348 // Low Pin Count Interface
// Peripheral Present
#define SYSCTL_PPPECI 0x400FE350 // Platform Environment Control
// Interface Peripheral Present
#define SYSCTL_PPFAN 0x400FE354 // Fan Control Peripheral Present
#define SYSCTL_PPEEPROM 0x400FE358 // EEPROM Peripheral Present
#define SYSCTL_PPWTIMER 0x400FE35C // 32/64-Bit Wide General-Purpose
// Timer Peripheral Present
#define SYSCTL_PPRTS 0x400FE370 // Remote Temperature Sensor
// Peripheral Present
#define SYSCTL_PPCCM 0x400FE374 // CRC and Cryptographic Modules
// Peripheral Present
#define SYSCTL_PPLCD 0x400FE390 // LCD Peripheral Present
#define SYSCTL_PPOWIRE 0x400FE398 // 1-Wire Peripheral Present
#define SYSCTL_PPEMAC 0x400FE39C // Ethernet MAC Peripheral Present
#define SYSCTL_PPHIM 0x400FE3A4 // Human Interface Master
// Peripheral Present
#define SYSCTL_SRWD 0x400FE500 // Watchdog Timer Software Reset
#define SYSCTL_SRTIMER 0x400FE504 // 16/32-Bit General-Purpose Timer
// Software Reset
#define SYSCTL_SRGPIO 0x400FE508 // General-Purpose Input/Output
// Software Reset
#define SYSCTL_SRDMA 0x400FE50C // Micro Direct Memory Access
// Software Reset
#define SYSCTL_SREPI 0x400FE510 // EPI Software Reset
#define SYSCTL_SRHIB 0x400FE514 // Hibernation Software Reset
#define SYSCTL_SRUART 0x400FE518 // Universal Asynchronous
// Receiver/Transmitter Software
// Reset
#define SYSCTL_SRSSI 0x400FE51C // Synchronous Serial Interface
// Software Reset
#define SYSCTL_SRI2C 0x400FE520 // Inter-Integrated Circuit
// Software Reset
#define SYSCTL_SRUSB 0x400FE528 // Universal Serial Bus Software
// Reset
#define SYSCTL_SREPHY 0x400FE530 // Ethernet PHY Software Reset
#define SYSCTL_SRCAN 0x400FE534 // Controller Area Network Software
// Reset
#define SYSCTL_SRADC 0x400FE538 // Analog-to-Digital Converter
// Software Reset
#define SYSCTL_SRACMP 0x400FE53C // Analog Comparator Software Reset
#define SYSCTL_SRPWM 0x400FE540 // Pulse Width Modulator Software
// Reset
#define SYSCTL_SRQEI 0x400FE544 // Quadrature Encoder Interface
// Software Reset
#define SYSCTL_SREEPROM 0x400FE558 // EEPROM Software Reset
#define SYSCTL_SRWTIMER 0x400FE55C // 32/64-Bit Wide General-Purpose
// Timer Software Reset
#define SYSCTL_SRCCM 0x400FE574 // CRC and Cryptographic Modules
// Software Reset
#define SYSCTL_SRLCD 0x400FE590 // LCD Controller Software Reset
#define SYSCTL_SROWIRE 0x400FE598 // 1-Wire Software Reset
#define SYSCTL_SREMAC 0x400FE59C // Ethernet MAC Software Reset
#define SYSCTL_RCGCWD 0x400FE600 // Watchdog Timer Run Mode Clock
// Gating Control
#define SYSCTL_RCGCTIMER 0x400FE604 // 16/32-Bit General-Purpose Timer
// Run Mode Clock Gating Control
#define SYSCTL_RCGCGPIO 0x400FE608 // General-Purpose Input/Output Run
// Mode Clock Gating Control
#define SYSCTL_RCGCDMA 0x400FE60C // Micro Direct Memory Access Run
// Mode Clock Gating Control
#define SYSCTL_RCGCEPI 0x400FE610 // EPI Run Mode Clock Gating
// Control
#define SYSCTL_RCGCHIB 0x400FE614 // Hibernation Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART 0x400FE618 // Universal Asynchronous
// Receiver/Transmitter Run Mode
// Clock Gating Control
#define SYSCTL_RCGCSSI 0x400FE61C // Synchronous Serial Interface Run
// Mode Clock Gating Control
#define SYSCTL_RCGCI2C 0x400FE620 // Inter-Integrated Circuit Run
// Mode Clock Gating Control
#define SYSCTL_RCGCUSB 0x400FE628 // Universal Serial Bus Run Mode
// Clock Gating Control
#define SYSCTL_RCGCEPHY 0x400FE630 // Ethernet PHY Run Mode Clock
// Gating Control
#define SYSCTL_RCGCCAN 0x400FE634 // Controller Area Network Run Mode
// Clock Gating Control
#define SYSCTL_RCGCADC 0x400FE638 // Analog-to-Digital Converter Run
// Mode Clock Gating Control
#define SYSCTL_RCGCACMP 0x400FE63C // Analog Comparator Run Mode Clock
// Gating Control
#define SYSCTL_RCGCPWM 0x400FE640 // Pulse Width Modulator Run Mode
// Clock Gating Control
#define SYSCTL_RCGCQEI 0x400FE644 // Quadrature Encoder Interface Run
// Mode Clock Gating Control
#define SYSCTL_RCGCEEPROM 0x400FE658 // EEPROM Run Mode Clock Gating
// Control
#define SYSCTL_RCGCWTIMER 0x400FE65C // 32/64-Bit Wide General-Purpose
// Timer Run Mode Clock Gating
// Control
#define SYSCTL_RCGCCCM 0x400FE674 // CRC and Cryptographic Modules
// Run Mode Clock Gating Control
#define SYSCTL_RCGCLCD 0x400FE690 // LCD Controller Run Mode Clock
// Gating Control
#define SYSCTL_RCGCOWIRE 0x400FE698 // 1-Wire Run Mode Clock Gating
// Control
#define SYSCTL_RCGCEMAC 0x400FE69C // Ethernet MAC Run Mode Clock
// Gating Control
#define SYSCTL_SCGCWD 0x400FE700 // Watchdog Timer Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCTIMER 0x400FE704 // 16/32-Bit General-Purpose Timer
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCGPIO 0x400FE708 // General-Purpose Input/Output
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCDMA 0x400FE70C // Micro Direct Memory Access Sleep
// Mode Clock Gating Control
#define SYSCTL_SCGCEPI 0x400FE710 // EPI Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCHIB 0x400FE714 // Hibernation Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART 0x400FE718 // Universal Asynchronous
// Receiver/Transmitter Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCSSI 0x400FE71C // Synchronous Serial Interface
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCI2C 0x400FE720 // Inter-Integrated Circuit Sleep
// Mode Clock Gating Control
#define SYSCTL_SCGCUSB 0x400FE728 // Universal Serial Bus Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCEPHY 0x400FE730 // Ethernet PHY Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCCAN 0x400FE734 // Controller Area Network Sleep
// Mode Clock Gating Control
#define SYSCTL_SCGCADC 0x400FE738 // Analog-to-Digital Converter
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCACMP 0x400FE73C // Analog Comparator Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCPWM 0x400FE740 // Pulse Width Modulator Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCQEI 0x400FE744 // Quadrature Encoder Interface
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCEEPROM 0x400FE758 // EEPROM Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCWTIMER 0x400FE75C // 32/64-Bit Wide General-Purpose
// Timer Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCCCM 0x400FE774 // CRC and Cryptographic Modules
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCLCD 0x400FE790 // LCD Controller Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCOWIRE 0x400FE798 // 1-Wire Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCEMAC 0x400FE79C // Ethernet MAC Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWD 0x400FE800 // Watchdog Timer Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCTIMER 0x400FE804 // 16/32-Bit General-Purpose Timer
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCGPIO 0x400FE808 // General-Purpose Input/Output
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCDMA 0x400FE80C // Micro Direct Memory Access
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCEPI 0x400FE810 // EPI Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCHIB 0x400FE814 // Hibernation Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART 0x400FE818 // Universal Asynchronous
// Receiver/Transmitter Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCSSI 0x400FE81C // Synchronous Serial Interface
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCI2C 0x400FE820 // Inter-Integrated Circuit
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCUSB 0x400FE828 // Universal Serial Bus Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCEPHY 0x400FE830 // Ethernet PHY Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCCAN 0x400FE834 // Controller Area Network
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCADC 0x400FE838 // Analog-to-Digital Converter
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCACMP 0x400FE83C // Analog Comparator Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCPWM 0x400FE840 // Pulse Width Modulator Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCQEI 0x400FE844 // Quadrature Encoder Interface
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCEEPROM 0x400FE858 // EEPROM Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWTIMER 0x400FE85C // 32/64-Bit Wide General-Purpose
// Timer Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCCCM 0x400FE874 // CRC and Cryptographic Modules
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCLCD 0x400FE890 // LCD Controller Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCOWIRE 0x400FE898 // 1-Wire Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCEMAC 0x400FE89C // Ethernet MAC Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_PCWD 0x400FE900 // Watchdog Timer Power Control
#define SYSCTL_PCTIMER 0x400FE904 // 16/32-Bit General-Purpose Timer
// Power Control
#define SYSCTL_PCGPIO 0x400FE908 // General-Purpose Input/Output
// Power Control
#define SYSCTL_PCDMA 0x400FE90C // Micro Direct Memory Access Power
// Control
#define SYSCTL_PCEPI 0x400FE910 // External Peripheral Interface
// Power Control
#define SYSCTL_PCHIB 0x400FE914 // Hibernation Power Control
#define SYSCTL_PCUART 0x400FE918 // Universal Asynchronous
// Receiver/Transmitter Power
// Control
#define SYSCTL_PCSSI 0x400FE91C // Synchronous Serial Interface
// Power Control
#define SYSCTL_PCI2C 0x400FE920 // Inter-Integrated Circuit Power
// Control
#define SYSCTL_PCUSB 0x400FE928 // Universal Serial Bus Power
// Control
#define SYSCTL_PCEPHY 0x400FE930 // Ethernet PHY Power Control
#define SYSCTL_PCCAN 0x400FE934 // Controller Area Network Power
// Control
#define SYSCTL_PCADC 0x400FE938 // Analog-to-Digital Converter
// Power Control
#define SYSCTL_PCACMP 0x400FE93C // Analog Comparator Power Control
#define SYSCTL_PCPWM 0x400FE940 // Pulse Width Modulator Power
// Control
#define SYSCTL_PCQEI 0x400FE944 // Quadrature Encoder Interface
// Power Control
#define SYSCTL_PCEEPROM 0x400FE958 // EEPROM Power Control
#define SYSCTL_PCCCM 0x400FE974 // CRC and Cryptographic Modules
// Power Control
#define SYSCTL_PCLCD 0x400FE990 // LCD Controller Power Control
#define SYSCTL_PCOWIRE 0x400FE998 // 1-Wire Power Control
#define SYSCTL_PCEMAC 0x400FE99C // Ethernet MAC Power Control
#define SYSCTL_PRWD 0x400FEA00 // Watchdog Timer Peripheral Ready
#define SYSCTL_PRTIMER 0x400FEA04 // 16/32-Bit General-Purpose Timer
// Peripheral Ready
#define SYSCTL_PRGPIO 0x400FEA08 // General-Purpose Input/Output
// Peripheral Ready
#define SYSCTL_PRDMA 0x400FEA0C // Micro Direct Memory Access
// Peripheral Ready
#define SYSCTL_PREPI 0x400FEA10 // EPI Peripheral Ready
#define SYSCTL_PRHIB 0x400FEA14 // Hibernation Peripheral Ready
#define SYSCTL_PRUART 0x400FEA18 // Universal Asynchronous
// Receiver/Transmitter Peripheral
// Ready
#define SYSCTL_PRSSI 0x400FEA1C // Synchronous Serial Interface
// Peripheral Ready
#define SYSCTL_PRI2C 0x400FEA20 // Inter-Integrated Circuit
// Peripheral Ready
#define SYSCTL_PRUSB 0x400FEA28 // Universal Serial Bus Peripheral
// Ready
#define SYSCTL_PREPHY 0x400FEA30 // Ethernet PHY Peripheral Ready
#define SYSCTL_PRCAN 0x400FEA34 // Controller Area Network
// Peripheral Ready
#define SYSCTL_PRADC 0x400FEA38 // Analog-to-Digital Converter
// Peripheral Ready
#define SYSCTL_PRACMP 0x400FEA3C // Analog Comparator Peripheral
// Ready
#define SYSCTL_PRPWM 0x400FEA40 // Pulse Width Modulator Peripheral
// Ready
#define SYSCTL_PRQEI 0x400FEA44 // Quadrature Encoder Interface
// Peripheral Ready
#define SYSCTL_PREEPROM 0x400FEA58 // EEPROM Peripheral Ready
#define SYSCTL_PRWTIMER 0x400FEA5C // 32/64-Bit Wide General-Purpose
// Timer Peripheral Ready
#define SYSCTL_PRCCM 0x400FEA74 // CRC and Cryptographic Modules
// Peripheral Ready
#define SYSCTL_PRLCD 0x400FEA90 // LCD Controller Peripheral Ready
#define SYSCTL_PROWIRE 0x400FEA98 // 1-Wire Peripheral Ready
#define SYSCTL_PREMAC 0x400FEA9C // Ethernet MAC Peripheral Ready
#define SYSCTL_UNIQUEID0 0x400FEF20 // Unique ID 0
#define SYSCTL_UNIQUEID1 0x400FEF24 // Unique ID 1
#define SYSCTL_UNIQUEID2 0x400FEF28 // Unique ID 2
#define SYSCTL_UNIQUEID3 0x400FEF2C // Unique ID 3
#define SYSCTL_CCMCGREQ 0x44030204 // Cryptographic Modules Clock
// Gating Request
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID0 register.
//
//*****************************************************************************
#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version
#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0
// register format.
#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class
#define SYSCTL_DID0_CLASS_TM4C123 \
0x00050000 // Tiva TM4C123x and TM4E123x
// microcontrollers
#define SYSCTL_DID0_CLASS_TM4C129 \
0x000A0000 // Tiva(TM) TM4C129-class
// microcontrollers
#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision
#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device)
#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer
// revision)
#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer
// revision)
#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision
#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major
// revision update
#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change
#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID1 register.
//
//*****************************************************************************
#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version
#define SYSCTL_DID1_VER_1 0x10000000 // fury_ib
#define SYSCTL_DID1_FAM_M 0x0F000000 // Family
#define SYSCTL_DID1_FAM_TIVA 0x00000000 // Tiva family of microcontollers
#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number
#define SYSCTL_DID1_PRTNO_TM4C1230C3PM \
0x00220000 // TM4C1230C3PM
#define SYSCTL_DID1_PRTNO_TM4C1230D5PM \
0x00230000 // TM4C1230D5PM
#define SYSCTL_DID1_PRTNO_TM4C1230E6PM \
0x00200000 // TM4C1230E6PM
#define SYSCTL_DID1_PRTNO_TM4C1230H6PM \
0x00210000 // TM4C1230H6PM
#define SYSCTL_DID1_PRTNO_TM4C1231C3PM \
0x00180000 // TM4C1231C3PM
#define SYSCTL_DID1_PRTNO_TM4C1231D5PM \
0x00190000 // TM4C1231D5PM
#define SYSCTL_DID1_PRTNO_TM4C1231D5PZ \
0x00360000 // TM4C1231D5PZ
#define SYSCTL_DID1_PRTNO_TM4C1231E6PM \
0x00100000 // TM4C1231E6PM
#define SYSCTL_DID1_PRTNO_TM4C1231E6PZ \
0x00300000 // TM4C1231E6PZ
#define SYSCTL_DID1_PRTNO_TM4C1231H6PGE \
0x00350000 // TM4C1231H6PGE
#define SYSCTL_DID1_PRTNO_TM4C1231H6PM \
0x00110000 // TM4C1231H6PM
#define SYSCTL_DID1_PRTNO_TM4C1231H6PZ \
0x00310000 // TM4C1231H6PZ
#define SYSCTL_DID1_PRTNO_TM4C1232C3PM \
0x00080000 // TM4C1232C3PM
#define SYSCTL_DID1_PRTNO_TM4C1232D5PM \
0x00090000 // TM4C1232D5PM
#define SYSCTL_DID1_PRTNO_TM4C1232E6PM \
0x000A0000 // TM4C1232E6PM
#define SYSCTL_DID1_PRTNO_TM4C1232H6PM \
0x000B0000 // TM4C1232H6PM
#define SYSCTL_DID1_PRTNO_TM4C1233C3PM \
0x00010000 // TM4C1233C3PM
#define SYSCTL_DID1_PRTNO_TM4C1233D5PM \
0x00020000 // TM4C1233D5PM
#define SYSCTL_DID1_PRTNO_TM4C1233D5PZ \
0x00D00000 // TM4C1233D5PZ
#define SYSCTL_DID1_PRTNO_TM4C1233E6PM \
0x00030000 // TM4C1233E6PM
#define SYSCTL_DID1_PRTNO_TM4C1233E6PZ \
0x00D10000 // TM4C1233E6PZ
#define SYSCTL_DID1_PRTNO_TM4C1233H6PGE \
0x00D60000 // TM4C1233H6PGE
#define SYSCTL_DID1_PRTNO_TM4C1233H6PM \
0x00040000 // TM4C1233H6PM
#define SYSCTL_DID1_PRTNO_TM4C1233H6PZ \
0x00D20000 // TM4C1233H6PZ
#define SYSCTL_DID1_PRTNO_TM4C1236D5PM \
0x00520000 // TM4C1236D5PM
#define SYSCTL_DID1_PRTNO_TM4C1236E6PM \
0x00500000 // TM4C1236E6PM
#define SYSCTL_DID1_PRTNO_TM4C1236H6PM \
0x00510000 // TM4C1236H6PM
#define SYSCTL_DID1_PRTNO_TM4C1237D5PM \
0x00480000 // TM4C1237D5PM
#define SYSCTL_DID1_PRTNO_TM4C1237D5PZ \
0x00660000 // TM4C1237D5PZ
#define SYSCTL_DID1_PRTNO_TM4C1237E6PM \
0x00400000 // TM4C1237E6PM
#define SYSCTL_DID1_PRTNO_TM4C1237E6PZ \
0x00600000 // TM4C1237E6PZ
#define SYSCTL_DID1_PRTNO_TM4C1237H6PGE \
0x00650000 // TM4C1237H6PGE
#define SYSCTL_DID1_PRTNO_TM4C1237H6PM \
0x00410000 // TM4C1237H6PM
#define SYSCTL_DID1_PRTNO_TM4C1237H6PZ \
0x00610000 // TM4C1237H6PZ
#define SYSCTL_DID1_PRTNO_TM4C123AE6PM \
0x00800000 // TM4C123AE6PM
#define SYSCTL_DID1_PRTNO_TM4C123AH6PM \
0x00830000 // TM4C123AH6PM
#define SYSCTL_DID1_PRTNO_TM4C123BE6PM \
0x00700000 // TM4C123BE6PM
#define SYSCTL_DID1_PRTNO_TM4C123BE6PZ \
0x00C30000 // TM4C123BE6PZ
#define SYSCTL_DID1_PRTNO_TM4C123BH6PGE \
0x00C60000 // TM4C123BH6PGE
#define SYSCTL_DID1_PRTNO_TM4C123BH6PM \
0x00730000 // TM4C123BH6PM
#define SYSCTL_DID1_PRTNO_TM4C123BH6PZ \
0x00C40000 // TM4C123BH6PZ
#define SYSCTL_DID1_PRTNO_TM4C123BH6ZRB \
0x00E90000 // TM4C123BH6ZRB
#define SYSCTL_DID1_PRTNO_TM4C123FE6PM \
0x00B00000 // TM4C123FE6PM
#define SYSCTL_DID1_PRTNO_TM4C123FH6PM \
0x00B10000 // TM4C123FH6PM
#define SYSCTL_DID1_PRTNO_TM4C123GE6PM \
0x00A00000 // TM4C123GE6PM
#define SYSCTL_DID1_PRTNO_TM4C123GE6PZ \
0x00C00000 // TM4C123GE6PZ
#define SYSCTL_DID1_PRTNO_TM4C123GH6PGE \
0x00C50000 // TM4C123GH6PGE
#define SYSCTL_DID1_PRTNO_TM4C123GH6PM \
0x00A10000 // TM4C123GH6PM
#define SYSCTL_DID1_PRTNO_TM4C123GH6PZ \
0x00C10000 // TM4C123GH6PZ
#define SYSCTL_DID1_PRTNO_TM4C123GH6ZRB \
0x00E30000 // TM4C123GH6ZRB
#define SYSCTL_DID1_PRTNO_TM4C1290NCPDT \
0x00190000 // TM4C1290NCPDT
#define SYSCTL_DID1_PRTNO_TM4C1290NCZAD \
0x001B0000 // TM4C1290NCZAD
#define SYSCTL_DID1_PRTNO_TM4C1292NCPDT \
0x001C0000 // TM4C1292NCPDT
#define SYSCTL_DID1_PRTNO_TM4C1292NCZAD \
0x001E0000 // TM4C1292NCZAD
#define SYSCTL_DID1_PRTNO_TM4C1294KCPDT \
0x00340000 // TM4C1294KCPDT
#define SYSCTL_DID1_PRTNO_TM4C1294NCPDT \
0x001F0000 // TM4C1294NCPDT
#define SYSCTL_DID1_PRTNO_TM4C1294NCZAD \
0x00210000 // TM4C1294NCZAD
#define SYSCTL_DID1_PRTNO_TM4C1297NCZAD \
0x00220000 // TM4C1297NCZAD
#define SYSCTL_DID1_PRTNO_TM4C1299KCZAD \
0x00360000 // TM4C1299KCZAD
#define SYSCTL_DID1_PRTNO_TM4C1299NCZAD \
0x00230000 // TM4C1299NCZAD
#define SYSCTL_DID1_PRTNO_TM4C129CNCPDT \
0x00240000 // TM4C129CNCPDT
#define SYSCTL_DID1_PRTNO_TM4C129CNCZAD \
0x00260000 // TM4C129CNCZAD
#define SYSCTL_DID1_PRTNO_TM4C129DNCPDT \
0x00270000 // TM4C129DNCPDT
#define SYSCTL_DID1_PRTNO_TM4C129DNCZAD \
0x00290000 // TM4C129DNCZAD
#define SYSCTL_DID1_PRTNO_TM4C129EKCPDT \
0x00350000 // TM4C129EKCPDT
#define SYSCTL_DID1_PRTNO_TM4C129ENCPDT \
0x002D0000 // TM4C129ENCPDT
#define SYSCTL_DID1_PRTNO_TM4C129ENCZAD \
0x002F0000 // TM4C129ENCZAD
#define SYSCTL_DID1_PRTNO_TM4C129LNCZAD \
0x00300000 // TM4C129LNCZAD
#define SYSCTL_DID1_PRTNO_TM4C129XKCZAD \
0x00370000 // TM4C129XKCZAD
#define SYSCTL_DID1_PRTNO_TM4C129XNCZAD \
0x00320000 // TM4C129XNCZAD
#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count
#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin LQFP package
#define SYSCTL_DID1_PINCNT_64 0x00006000 // 64-pin LQFP package
#define SYSCTL_DID1_PINCNT_144 0x00008000 // 144-pin LQFP package
#define SYSCTL_DID1_PINCNT_157 0x0000A000 // 157-pin BGA package
#define SYSCTL_DID1_PINCNT_128 0x0000C000 // 128-pin TQFP package
#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range
#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range
#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range
#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range
#define SYSCTL_DID1_TEMP_IE 0x00000060 // Available in both industrial
// temperature range (-40C to 85C)
// and extended temperature range
// (-40C to 105C) devices. See
#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type
#define SYSCTL_DID1_PKG_QFP 0x00000008 // QFP package
#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package
#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance
#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status
#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified)
#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified)
#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC0 register.
//
//*****************************************************************************
#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size
#define SYSCTL_DC0_SRAMSZ_2KB 0x00070000 // 2 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_4KB 0x000F0000 // 4 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_6KB 0x00170000 // 6 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_8KB 0x001F0000 // 8 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_12KB 0x002F0000 // 12 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_16KB 0x003F0000 // 16 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_20KB 0x004F0000 // 20 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_24KB 0x005F0000 // 24 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_32KB 0x007F0000 // 32 KB of SRAM
#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size
#define SYSCTL_DC0_FLASHSZ_8KB 0x00000003 // 8 KB of Flash
#define SYSCTL_DC0_FLASHSZ_16KB 0x00000007 // 16 KB of Flash
#define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F // 32 KB of Flash
#define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F // 64 KB of Flash
#define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F // 96 KB of Flash
#define SYSCTL_DC0_FLASHSZ_128K 0x0000003F // 128 KB of Flash
#define SYSCTL_DC0_FLASHSZ_192K 0x0000005F // 192 KB of Flash
#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC1 register.
//
//*****************************************************************************
#define SYSCTL_DC1_WDT1 0x10000000 // Watchdog Timer1 Present
#define SYSCTL_DC1_CAN1 0x02000000 // CAN Module 1 Present
#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present
#define SYSCTL_DC1_PWM1 0x00200000 // PWM Module 1 Present
#define SYSCTL_DC1_PWM0 0x00100000 // PWM Module 0 Present
#define SYSCTL_DC1_ADC1 0x00020000 // ADC Module 1 Present
#define SYSCTL_DC1_ADC0 0x00010000 // ADC Module 0 Present
#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider
#define SYSCTL_DC1_MINSYSDIV_80 0x00002000 // Specifies an 80-MHz CPU clock
// with a PLL divider of 2.5
#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock
// with a PLL divider of 4
#define SYSCTL_DC1_MINSYSDIV_40 0x00004000 // Specifies a 40-MHz CPU clock
// with a PLL divider of 5
#define SYSCTL_DC1_MINSYSDIV_25 0x00007000 // Specifies a 25-MHz clock with a
// PLL divider of 8
#define SYSCTL_DC1_MINSYSDIV_20 0x00009000 // Specifies a 20-MHz clock with a
// PLL divider of 10
#define SYSCTL_DC1_ADC1SPD_M 0x00000C00 // Max ADC1 Speed
#define SYSCTL_DC1_ADC1SPD_125K 0x00000000 // 125K samples/second
#define SYSCTL_DC1_ADC1SPD_250K 0x00000400 // 250K samples/second
#define SYSCTL_DC1_ADC1SPD_500K 0x00000800 // 500K samples/second
#define SYSCTL_DC1_ADC1SPD_1M 0x00000C00 // 1M samples/second
#define SYSCTL_DC1_ADC0SPD_M 0x00000300 // Max ADC0 Speed
#define SYSCTL_DC1_ADC0SPD_125K 0x00000000 // 125K samples/second
#define SYSCTL_DC1_ADC0SPD_250K 0x00000100 // 250K samples/second
#define SYSCTL_DC1_ADC0SPD_500K 0x00000200 // 500K samples/second
#define SYSCTL_DC1_ADC0SPD_1M 0x00000300 // 1M samples/second
#define SYSCTL_DC1_MPU 0x00000080 // MPU Present
#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present
#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present
#define SYSCTL_DC1_PLL 0x00000010 // PLL Present
#define SYSCTL_DC1_WDT0 0x00000008 // Watchdog Timer 0 Present
#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present
#define SYSCTL_DC1_SWD 0x00000002 // SWD Present
#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC2 register.
//
//*****************************************************************************
#define SYSCTL_DC2_EPI0 0x40000000 // EPI Module 0 Present
#define SYSCTL_DC2_I2S0 0x10000000 // I2S Module 0 Present
#define SYSCTL_DC2_COMP2 0x04000000 // Analog Comparator 2 Present
#define SYSCTL_DC2_COMP1 0x02000000 // Analog Comparator 1 Present
#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present
#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present
#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present
#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present
#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present
#define SYSCTL_DC2_I2C1HS 0x00008000 // I2C Module 1 Speed
#define SYSCTL_DC2_I2C1 0x00004000 // I2C Module 1 Present
#define SYSCTL_DC2_I2C0HS 0x00002000 // I2C Module 0 Speed
#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present
#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present
#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present
#define SYSCTL_DC2_SSI1 0x00000020 // SSI Module 1 Present
#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present
#define SYSCTL_DC2_UART2 0x00000004 // UART Module 2 Present
#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present
#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC3 register.
//
//*****************************************************************************
#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available
#define SYSCTL_DC3_CCP5 0x20000000 // T2CCP1 Pin Present
#define SYSCTL_DC3_CCP4 0x10000000 // T2CCP0 Pin Present
#define SYSCTL_DC3_CCP3 0x08000000 // T1CCP1 Pin Present
#define SYSCTL_DC3_CCP2 0x04000000 // T1CCP0 Pin Present
#define SYSCTL_DC3_CCP1 0x02000000 // T0CCP1 Pin Present
#define SYSCTL_DC3_CCP0 0x01000000 // T0CCP0 Pin Present
#define SYSCTL_DC3_ADC0AIN7 0x00800000 // ADC Module 0 AIN7 Pin Present
#define SYSCTL_DC3_ADC0AIN6 0x00400000 // ADC Module 0 AIN6 Pin Present
#define SYSCTL_DC3_ADC0AIN5 0x00200000 // ADC Module 0 AIN5 Pin Present
#define SYSCTL_DC3_ADC0AIN4 0x00100000 // ADC Module 0 AIN4 Pin Present
#define SYSCTL_DC3_ADC0AIN3 0x00080000 // ADC Module 0 AIN3 Pin Present
#define SYSCTL_DC3_ADC0AIN2 0x00040000 // ADC Module 0 AIN2 Pin Present
#define SYSCTL_DC3_ADC0AIN1 0x00020000 // ADC Module 0 AIN1 Pin Present
#define SYSCTL_DC3_ADC0AIN0 0x00010000 // ADC Module 0 AIN0 Pin Present
#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present
#define SYSCTL_DC3_C2O 0x00004000 // C2o Pin Present
#define SYSCTL_DC3_C2PLUS 0x00002000 // C2+ Pin Present
#define SYSCTL_DC3_C2MINUS 0x00001000 // C2- Pin Present
#define SYSCTL_DC3_C1O 0x00000800 // C1o Pin Present
#define SYSCTL_DC3_C1PLUS 0x00000400 // C1+ Pin Present
#define SYSCTL_DC3_C1MINUS 0x00000200 // C1- Pin Present
#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present
#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present
#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present
#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present
#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present
#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present
#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present
#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present
#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC4 register.
//
//*****************************************************************************
#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present
#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present
#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable
#define SYSCTL_DC4_PICAL 0x00040000 // PIOSC Calibrate
#define SYSCTL_DC4_CCP7 0x00008000 // T3CCP1 Pin Present
#define SYSCTL_DC4_CCP6 0x00004000 // T3CCP0 Pin Present
#define SYSCTL_DC4_UDMA 0x00002000 // Micro-DMA Module Present
#define SYSCTL_DC4_ROM 0x00001000 // Internal Code ROM Present
#define SYSCTL_DC4_GPIOJ 0x00000100 // GPIO Port J Present
#define SYSCTL_DC4_GPIOH 0x00000080 // GPIO Port H Present
#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present
#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present
#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present
#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present
#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present
#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present
#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC5 register.
//
//*****************************************************************************
#define SYSCTL_DC5_PWMFAULT3 0x08000000 // PWM Fault 3 Pin Present
#define SYSCTL_DC5_PWMFAULT2 0x04000000 // PWM Fault 2 Pin Present
#define SYSCTL_DC5_PWMFAULT1 0x02000000 // PWM Fault 1 Pin Present
#define SYSCTL_DC5_PWMFAULT0 0x01000000 // PWM Fault 0 Pin Present
#define SYSCTL_DC5_PWMEFLT 0x00200000 // PWM Extended Fault Active
#define SYSCTL_DC5_PWMESYNC 0x00100000 // PWM Extended SYNC Active
#define SYSCTL_DC5_PWM7 0x00000080 // PWM7 Pin Present
#define SYSCTL_DC5_PWM6 0x00000040 // PWM6 Pin Present
#define SYSCTL_DC5_PWM5 0x00000020 // PWM5 Pin Present
#define SYSCTL_DC5_PWM4 0x00000010 // PWM4 Pin Present
#define SYSCTL_DC5_PWM3 0x00000008 // PWM3 Pin Present
#define SYSCTL_DC5_PWM2 0x00000004 // PWM2 Pin Present
#define SYSCTL_DC5_PWM1 0x00000002 // PWM1 Pin Present
#define SYSCTL_DC5_PWM0 0x00000001 // PWM0 Pin Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC6 register.
//
//*****************************************************************************
#define SYSCTL_DC6_USB0PHY 0x00000010 // USB Module 0 PHY Present
#define SYSCTL_DC6_USB0_M 0x00000003 // USB Module 0 Present
#define SYSCTL_DC6_USB0_DEV 0x00000001 // USB0 is Device Only
#define SYSCTL_DC6_USB0_HOSTDEV 0x00000002 // USB is Device or Host
#define SYSCTL_DC6_USB0_OTG 0x00000003 // USB0 is OTG
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC7 register.
//
//*****************************************************************************
#define SYSCTL_DC7_DMACH30 0x40000000 // DMA Channel 30
#define SYSCTL_DC7_DMACH29 0x20000000 // DMA Channel 29
#define SYSCTL_DC7_DMACH28 0x10000000 // DMA Channel 28
#define SYSCTL_DC7_DMACH27 0x08000000 // DMA Channel 27
#define SYSCTL_DC7_DMACH26 0x04000000 // DMA Channel 26
#define SYSCTL_DC7_DMACH25 0x02000000 // DMA Channel 25
#define SYSCTL_DC7_DMACH24 0x01000000 // DMA Channel 24
#define SYSCTL_DC7_DMACH23 0x00800000 // DMA Channel 23
#define SYSCTL_DC7_DMACH22 0x00400000 // DMA Channel 22
#define SYSCTL_DC7_DMACH21 0x00200000 // DMA Channel 21
#define SYSCTL_DC7_DMACH20 0x00100000 // DMA Channel 20
#define SYSCTL_DC7_DMACH19 0x00080000 // DMA Channel 19
#define SYSCTL_DC7_DMACH18 0x00040000 // DMA Channel 18
#define SYSCTL_DC7_DMACH17 0x00020000 // DMA Channel 17
#define SYSCTL_DC7_DMACH16 0x00010000 // DMA Channel 16
#define SYSCTL_DC7_DMACH15 0x00008000 // DMA Channel 15
#define SYSCTL_DC7_DMACH14 0x00004000 // DMA Channel 14
#define SYSCTL_DC7_DMACH13 0x00002000 // DMA Channel 13
#define SYSCTL_DC7_DMACH12 0x00001000 // DMA Channel 12
#define SYSCTL_DC7_DMACH11 0x00000800 // DMA Channel 11
#define SYSCTL_DC7_DMACH10 0x00000400 // DMA Channel 10
#define SYSCTL_DC7_DMACH9 0x00000200 // DMA Channel 9
#define SYSCTL_DC7_DMACH8 0x00000100 // DMA Channel 8
#define SYSCTL_DC7_DMACH7 0x00000080 // DMA Channel 7
#define SYSCTL_DC7_DMACH6 0x00000040 // DMA Channel 6
#define SYSCTL_DC7_DMACH5 0x00000020 // DMA Channel 5
#define SYSCTL_DC7_DMACH4 0x00000010 // DMA Channel 4
#define SYSCTL_DC7_DMACH3 0x00000008 // DMA Channel 3
#define SYSCTL_DC7_DMACH2 0x00000004 // DMA Channel 2
#define SYSCTL_DC7_DMACH1 0x00000002 // DMA Channel 1
#define SYSCTL_DC7_DMACH0 0x00000001 // DMA Channel 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC8 register.
//
//*****************************************************************************
#define SYSCTL_DC8_ADC1AIN15 0x80000000 // ADC Module 1 AIN15 Pin Present
#define SYSCTL_DC8_ADC1AIN14 0x40000000 // ADC Module 1 AIN14 Pin Present
#define SYSCTL_DC8_ADC1AIN13 0x20000000 // ADC Module 1 AIN13 Pin Present
#define SYSCTL_DC8_ADC1AIN12 0x10000000 // ADC Module 1 AIN12 Pin Present
#define SYSCTL_DC8_ADC1AIN11 0x08000000 // ADC Module 1 AIN11 Pin Present
#define SYSCTL_DC8_ADC1AIN10 0x04000000 // ADC Module 1 AIN10 Pin Present
#define SYSCTL_DC8_ADC1AIN9 0x02000000 // ADC Module 1 AIN9 Pin Present
#define SYSCTL_DC8_ADC1AIN8 0x01000000 // ADC Module 1 AIN8 Pin Present
#define SYSCTL_DC8_ADC1AIN7 0x00800000 // ADC Module 1 AIN7 Pin Present
#define SYSCTL_DC8_ADC1AIN6 0x00400000 // ADC Module 1 AIN6 Pin Present
#define SYSCTL_DC8_ADC1AIN5 0x00200000 // ADC Module 1 AIN5 Pin Present
#define SYSCTL_DC8_ADC1AIN4 0x00100000 // ADC Module 1 AIN4 Pin Present
#define SYSCTL_DC8_ADC1AIN3 0x00080000 // ADC Module 1 AIN3 Pin Present
#define SYSCTL_DC8_ADC1AIN2 0x00040000 // ADC Module 1 AIN2 Pin Present
#define SYSCTL_DC8_ADC1AIN1 0x00020000 // ADC Module 1 AIN1 Pin Present
#define SYSCTL_DC8_ADC1AIN0 0x00010000 // ADC Module 1 AIN0 Pin Present
#define SYSCTL_DC8_ADC0AIN15 0x00008000 // ADC Module 0 AIN15 Pin Present
#define SYSCTL_DC8_ADC0AIN14 0x00004000 // ADC Module 0 AIN14 Pin Present
#define SYSCTL_DC8_ADC0AIN13 0x00002000 // ADC Module 0 AIN13 Pin Present
#define SYSCTL_DC8_ADC0AIN12 0x00001000 // ADC Module 0 AIN12 Pin Present
#define SYSCTL_DC8_ADC0AIN11 0x00000800 // ADC Module 0 AIN11 Pin Present
#define SYSCTL_DC8_ADC0AIN10 0x00000400 // ADC Module 0 AIN10 Pin Present
#define SYSCTL_DC8_ADC0AIN9 0x00000200 // ADC Module 0 AIN9 Pin Present
#define SYSCTL_DC8_ADC0AIN8 0x00000100 // ADC Module 0 AIN8 Pin Present
#define SYSCTL_DC8_ADC0AIN7 0x00000080 // ADC Module 0 AIN7 Pin Present
#define SYSCTL_DC8_ADC0AIN6 0x00000040 // ADC Module 0 AIN6 Pin Present
#define SYSCTL_DC8_ADC0AIN5 0x00000020 // ADC Module 0 AIN5 Pin Present
#define SYSCTL_DC8_ADC0AIN4 0x00000010 // ADC Module 0 AIN4 Pin Present
#define SYSCTL_DC8_ADC0AIN3 0x00000008 // ADC Module 0 AIN3 Pin Present
#define SYSCTL_DC8_ADC0AIN2 0x00000004 // ADC Module 0 AIN2 Pin Present
#define SYSCTL_DC8_ADC0AIN1 0x00000002 // ADC Module 0 AIN1 Pin Present
#define SYSCTL_DC8_ADC0AIN0 0x00000001 // ADC Module 0 AIN0 Pin Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PBORCTL register.
//
//*****************************************************************************
#define SYSCTL_PBORCTL_BOR0 0x00000004 // VDD under BOR0 Event Action
#define SYSCTL_PBORCTL_BOR1 0x00000002 // VDD under BOR1 Event Action
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PTBOCTL register.
//
//*****************************************************************************
#define SYSCTL_PTBOCTL_VDDA_UBOR_M \
0x00000300 // VDDA under BOR Event Action
#define SYSCTL_PTBOCTL_VDDA_UBOR_NONE \
0x00000000 // No Action
#define SYSCTL_PTBOCTL_VDDA_UBOR_SYSINT \
0x00000100 // System control interrupt
#define SYSCTL_PTBOCTL_VDDA_UBOR_NMI \
0x00000200 // NMI
#define SYSCTL_PTBOCTL_VDDA_UBOR_RST \
0x00000300 // Reset
#define SYSCTL_PTBOCTL_VDD_UBOR_M \
0x00000003 // VDD (VDDS) under BOR Event
// Action
#define SYSCTL_PTBOCTL_VDD_UBOR_NONE \
0x00000000 // No Action
#define SYSCTL_PTBOCTL_VDD_UBOR_SYSINT \
0x00000001 // System control interrupt
#define SYSCTL_PTBOCTL_VDD_UBOR_NMI \
0x00000002 // NMI
#define SYSCTL_PTBOCTL_VDD_UBOR_RST \
0x00000003 // Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR0 register.
//
//*****************************************************************************
#define SYSCTL_SRCR0_WDT1 0x10000000 // WDT1 Reset Control
#define SYSCTL_SRCR0_CAN1 0x02000000 // CAN1 Reset Control
#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control
#define SYSCTL_SRCR0_PWM0 0x00100000 // PWM Reset Control
#define SYSCTL_SRCR0_ADC1 0x00020000 // ADC1 Reset Control
#define SYSCTL_SRCR0_ADC0 0x00010000 // ADC0 Reset Control
#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control
#define SYSCTL_SRCR0_WDT0 0x00000008 // WDT0 Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR1 register.
//
//*****************************************************************************
#define SYSCTL_SRCR1_COMP2 0x04000000 // Analog Comp 2 Reset Control
#define SYSCTL_SRCR1_COMP1 0x02000000 // Analog Comp 1 Reset Control
#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control
#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control
#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control
#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control
#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control
#define SYSCTL_SRCR1_I2C1 0x00004000 // I2C1 Reset Control
#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control
#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control
#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control
#define SYSCTL_SRCR1_SSI1 0x00000020 // SSI1 Reset Control
#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control
#define SYSCTL_SRCR1_UART2 0x00000004 // UART2 Reset Control
#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control
#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR2 register.
//
//*****************************************************************************
#define SYSCTL_SRCR2_USB0 0x00010000 // USB0 Reset Control
#define SYSCTL_SRCR2_UDMA 0x00002000 // Micro-DMA Reset Control
#define SYSCTL_SRCR2_GPIOJ 0x00000100 // Port J Reset Control
#define SYSCTL_SRCR2_GPIOH 0x00000080 // Port H Reset Control
#define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control
#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control
#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control
#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control
#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control
#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control
#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RIS register.
//
//*****************************************************************************
#define SYSCTL_RIS_BOR0RIS 0x00000800 // VDD under BOR0 Raw Interrupt
// Status
#define SYSCTL_RIS_VDDARIS 0x00000400 // VDDA Power OK Event Raw
// Interrupt Status
#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt
// Status
#define SYSCTL_RIS_USBPLLLRIS 0x00000080 // USB PLL Lock Raw Interrupt
// Status
#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status
#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Failure Raw
// Interrupt Status
#define SYSCTL_RIS_BOR1RIS 0x00000002 // VDD under BOR1 Raw Interrupt
// Status
#define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_IMC register.
//
//*****************************************************************************
#define SYSCTL_IMC_BOR0IM 0x00000800 // VDD under BOR0 Interrupt Mask
#define SYSCTL_IMC_VDDAIM 0x00000400 // VDDA Power OK Interrupt Mask
#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask
#define SYSCTL_IMC_USBPLLLIM 0x00000080 // USB PLL Lock Interrupt Mask
#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask
#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Failure
// Interrupt Mask
#define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask
#define SYSCTL_IMC_BOR1IM 0x00000002 // VDD under BOR1 Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MISC register.
//
//*****************************************************************************
#define SYSCTL_MISC_BOR0MIS 0x00000800 // VDD under BOR0 Masked Interrupt
// Status
#define SYSCTL_MISC_VDDAMIS 0x00000400 // VDDA Power OK Masked Interrupt
// Status
#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt
// Status
#define SYSCTL_MISC_USBPLLLMIS 0x00000080 // USB PLL Lock Masked Interrupt
// Status
#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status
#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Failure Masked
// Interrupt Status
#define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status
#define SYSCTL_MISC_BOR1MIS 0x00000002 // VDD under BOR1 Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RESC register.
//
//*****************************************************************************
#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset
#define SYSCTL_RESC_HSSR 0x00001000 // HSSR Reset
#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset
#define SYSCTL_RESC_SW 0x00000010 // Software Reset
#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset
#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset
#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset
#define SYSCTL_RESC_EXT 0x00000001 // External Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PWRTC register.
//
//*****************************************************************************
#define SYSCTL_PWRTC_VDDA_UBOR 0x00000010 // VDDA Under BOR Status
#define SYSCTL_PWRTC_VDD_UBOR 0x00000001 // VDD Under BOR Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC register.
//
//*****************************************************************************
#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating
#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor
#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider
#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor
#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor
#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2
#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4
#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8
#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16
#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32
#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64
#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down
#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass
#define SYSCTL_RCC_XTAL_M 0x000007C0 // Crystal Value
#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz
#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz
#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz
#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz
#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz
#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz
#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz
#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz
#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz
#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz
#define SYSCTL_RCC_XTAL_10MHZ 0x00000400 // 10 MHz
#define SYSCTL_RCC_XTAL_12MHZ 0x00000440 // 12 MHz
#define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480 // 12.288 MHz
#define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0 // 13.56 MHz
#define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500 // 14.31818 MHz
#define SYSCTL_RCC_XTAL_16MHZ 0x00000540 // 16 MHz
#define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580 // 16.384 MHz
#define SYSCTL_RCC_XTAL_18MHZ 0x000005C0 // 18.0 MHz (USB)
#define SYSCTL_RCC_XTAL_20MHZ 0x00000600 // 20.0 MHz (USB)
#define SYSCTL_RCC_XTAL_24MHZ 0x00000640 // 24.0 MHz (USB)
#define SYSCTL_RCC_XTAL_25MHZ 0x00000680 // 25.0 MHz (USB)
#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source
#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC
#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC
#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4
#define SYSCTL_RCC_OSCSRC_30 0x00000030 // LFIOSC
#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable
#define SYSCTL_RCC_SYSDIV_S 23
#define SYSCTL_RCC_XTAL_S 6 // Shift to the XTAL field
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_NMIC register.
//
//*****************************************************************************
#define SYSCTL_NMIC_MOSCFAIL 0x00010000 // MOSC Failure NMI
#define SYSCTL_NMIC_TAMPER 0x00000200 // Tamper Event NMI
#define SYSCTL_NMIC_WDT1 0x00000020 // Watch Dog Timer (WDT) 1 NMI
#define SYSCTL_NMIC_WDT0 0x00000008 // Watch Dog Timer (WDT) 0 NMI
#define SYSCTL_NMIC_POWER 0x00000004 // Power/Brown Out Event NMI
#define SYSCTL_NMIC_EXTERNAL 0x00000001 // External Pin NMI
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_GPIOHBCTL
// register.
//
//*****************************************************************************
#define SYSCTL_GPIOHBCTL_PORTJ 0x00000100 // Port J Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTH 0x00000080 // Port H Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTG 0x00000040 // Port G Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTF 0x00000020 // Port F Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTE 0x00000010 // Port E Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTD 0x00000008 // Port D Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTC 0x00000004 // Port C Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTB 0x00000002 // Port B Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTA 0x00000001 // Port A Advanced High-Performance
// Bus
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC2 register.
//
//*****************************************************************************
#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2
#define SYSCTL_RCC2_DIV400 0x40000000 // Divide PLL as 400 MHz vs. 200
// MHz
#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2
#define SYSCTL_RCC2_SYSDIV2LSB 0x00400000 // Additional LSB for SYSDIV2
#define SYSCTL_RCC2_USBPWRDN 0x00004000 // Power-Down USB PLL
#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2
#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2
#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2
#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC
#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC
#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4
#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // LFIOSC
#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz
#define SYSCTL_RCC2_SYSDIV2_S 23
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MOSCCTL register.
//
//*****************************************************************************
#define SYSCTL_MOSCCTL_OSCRNG 0x00000010 // Oscillator Range
#define SYSCTL_MOSCCTL_PWRDN 0x00000008 // Power Down
#define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected
#define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action
#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RSCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_RSCLKCFG_MEMTIMU 0x80000000 // Memory Timing Register Update
#define SYSCTL_RSCLKCFG_NEWFREQ 0x40000000 // New PLLFREQ Accept
#define SYSCTL_RSCLKCFG_ACG 0x20000000 // Auto Clock Gating
#define SYSCTL_RSCLKCFG_USEPLL 0x10000000 // Use PLL
#define SYSCTL_RSCLKCFG_PLLSRC_M \
0x0F000000 // PLL Source
#define SYSCTL_RSCLKCFG_PLLSRC_PIOSC \
0x00000000 // PIOSC is PLL input clock source
#define SYSCTL_RSCLKCFG_PLLSRC_MOSC \
0x03000000 // MOSC is the PLL input clock
// source
#define SYSCTL_RSCLKCFG_OSCSRC_M \
0x00F00000 // Oscillator Source
#define SYSCTL_RSCLKCFG_OSCSRC_PIOSC \
0x00000000 // PIOSC is oscillator source
#define SYSCTL_RSCLKCFG_OSCSRC_LFIOSC \
0x00200000 // LFIOSC is oscillator source
#define SYSCTL_RSCLKCFG_OSCSRC_MOSC \
0x00300000 // MOSC is oscillator source
#define SYSCTL_RSCLKCFG_OSCSRC_RTC \
0x00400000 // Hibernation Module RTC
// Oscillator (RTCOSC)
#define SYSCTL_RSCLKCFG_OSYSDIV_M \
0x000FFC00 // Oscillator System Clock Divisor
#define SYSCTL_RSCLKCFG_PSYSDIV_M \
0x000003FF // PLL System Clock Divisor
#define SYSCTL_RSCLKCFG_OSYSDIV_S \
10
#define SYSCTL_RSCLKCFG_PSYSDIV_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MEMTIM0 register.
//
//*****************************************************************************
#define SYSCTL_MEMTIM0_EBCHT_M 0x03C00000 // EEPROM Clock High Time
#define SYSCTL_MEMTIM0_EBCHT_0_5 \
0x00000000 // 1/2 system clock period
#define SYSCTL_MEMTIM0_EBCHT_1 0x00400000 // 1 system clock period
#define SYSCTL_MEMTIM0_EBCHT_1_5 \
0x00800000 // 1.5 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_2 0x00C00000 // 2 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_2_5 \
0x01000000 // 2.5 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_3 0x01400000 // 3 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_3_5 \
0x01800000 // 3.5 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_4 0x01C00000 // 4 system clock periods
#define SYSCTL_MEMTIM0_EBCHT_4_5 \
0x02000000 // 4.5 system clock periods
#define SYSCTL_MEMTIM0_EBCE 0x00200000 // EEPROM Bank Clock Edge
#define SYSCTL_MEMTIM0_MB1 0x00100010 // Must be one
#define SYSCTL_MEMTIM0_EWS_M 0x000F0000 // EEPROM Wait States
#define SYSCTL_MEMTIM0_FBCHT_M 0x000003C0 // Flash Bank Clock High Time
#define SYSCTL_MEMTIM0_FBCHT_0_5 \
0x00000000 // 1/2 system clock period
#define SYSCTL_MEMTIM0_FBCHT_1 0x00000040 // 1 system clock period
#define SYSCTL_MEMTIM0_FBCHT_1_5 \
0x00000080 // 1.5 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_2 0x000000C0 // 2 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_2_5 \
0x00000100 // 2.5 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_3 0x00000140 // 3 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_3_5 \
0x00000180 // 3.5 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_4 0x000001C0 // 4 system clock periods
#define SYSCTL_MEMTIM0_FBCHT_4_5 \
0x00000200 // 4.5 system clock periods
#define SYSCTL_MEMTIM0_FBCE 0x00000020 // Flash Bank Clock Edge
#define SYSCTL_MEMTIM0_FWS_M 0x0000000F // Flash Wait State
#define SYSCTL_MEMTIM0_EWS_S 16
#define SYSCTL_MEMTIM0_FWS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC0 register.
//
//*****************************************************************************
#define SYSCTL_RCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
#define SYSCTL_RCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_RCGC0_PWM0 0x00100000 // PWM Clock Gating Control
#define SYSCTL_RCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
#define SYSCTL_RCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_RCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed
#define SYSCTL_RCGC0_ADC1SPD_125K \
0x00000000 // 125K samples/second
#define SYSCTL_RCGC0_ADC1SPD_250K \
0x00000400 // 250K samples/second
#define SYSCTL_RCGC0_ADC1SPD_500K \
0x00000800 // 500K samples/second
#define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second
#define SYSCTL_RCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed
#define SYSCTL_RCGC0_ADC0SPD_125K \
0x00000000 // 125K samples/second
#define SYSCTL_RCGC0_ADC0SPD_250K \
0x00000100 // 250K samples/second
#define SYSCTL_RCGC0_ADC0SPD_500K \
0x00000200 // 500K samples/second
#define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second
#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_RCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC1 register.
//
//*****************************************************************************
#define SYSCTL_RCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
#define SYSCTL_RCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_RCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_RCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_RCGC1_UART2 0x00000004 // UART2 Clock Gating Control
#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC2 register.
//
//*****************************************************************************
#define SYSCTL_RCGC2_USB0 0x00010000 // USB0 Clock Gating Control
#define SYSCTL_RCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
#define SYSCTL_RCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
#define SYSCTL_RCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
#define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC0 register.
//
//*****************************************************************************
#define SYSCTL_SCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
#define SYSCTL_SCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_SCGC0_PWM0 0x00100000 // PWM Clock Gating Control
#define SYSCTL_SCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
#define SYSCTL_SCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_SCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed
#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_SCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC1 register.
//
//*****************************************************************************
#define SYSCTL_SCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
#define SYSCTL_SCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_SCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_SCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_SCGC1_UART2 0x00000004 // UART2 Clock Gating Control
#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC2 register.
//
//*****************************************************************************
#define SYSCTL_SCGC2_USB0 0x00010000 // USB0 Clock Gating Control
#define SYSCTL_SCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
#define SYSCTL_SCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
#define SYSCTL_SCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
#define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC0 register.
//
//*****************************************************************************
#define SYSCTL_DCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
#define SYSCTL_DCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_DCGC0_PWM0 0x00100000 // PWM Clock Gating Control
#define SYSCTL_DCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
#define SYSCTL_DCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_DCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC1 register.
//
//*****************************************************************************
#define SYSCTL_DCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
#define SYSCTL_DCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_DCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_DCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_DCGC1_UART2 0x00000004 // UART2 Clock Gating Control
#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC2 register.
//
//*****************************************************************************
#define SYSCTL_DCGC2_USB0 0x00010000 // USB0 Clock Gating Control
#define SYSCTL_DCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
#define SYSCTL_DCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
#define SYSCTL_DCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
#define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_ALTCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_ALTCLKCFG_ALTCLK_M \
0x0000000F // Alternate Clock Source
#define SYSCTL_ALTCLKCFG_ALTCLK_PIOSC \
0x00000000 // PIOSC
#define SYSCTL_ALTCLKCFG_ALTCLK_RTCOSC \
0x00000003 // Hibernation Module Real-time
// clock output (RTCOSC)
#define SYSCTL_ALTCLKCFG_ALTCLK_LFIOSC \
0x00000004 // Low-frequency internal
// oscillator (LFIOSC)
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override
#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source
#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC
#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC
#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // LFIOSC
#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz
#define SYSCTL_DSLPCLKCFG_PIOSCPD \
0x00000002 // PIOSC Power Down Request
#define SYSCTL_DSLPCLKCFG_D_S 23
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSCLKCFG_PIOSCPD 0x80000000 // PIOSC Power Down
#define SYSCTL_DSCLKCFG_MOSCDPD 0x40000000 // MOSC Disable Power Down
#define SYSCTL_DSCLKCFG_DSOSCSRC_M \
0x00F00000 // Deep Sleep Oscillator Source
#define SYSCTL_DSCLKCFG_DSOSCSRC_PIOSC \
0x00000000 // PIOSC
#define SYSCTL_DSCLKCFG_DSOSCSRC_LFIOSC \
0x00200000 // LFIOSC
#define SYSCTL_DSCLKCFG_DSOSCSRC_MOSC \
0x00300000 // MOSC
#define SYSCTL_DSCLKCFG_DSOSCSRC_RTC \
0x00400000 // Hibernation Module RTCOSC
#define SYSCTL_DSCLKCFG_DSSYSDIV_M \
0x000003FF // Deep Sleep Clock Divisor
#define SYSCTL_DSCLKCFG_DSSYSDIV_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DIVSCLK register.
//
//*****************************************************************************
#define SYSCTL_DIVSCLK_EN 0x80000000 // DIVSCLK Enable
#define SYSCTL_DIVSCLK_SRC_M 0x00030000 // Clock Source
#define SYSCTL_DIVSCLK_SRC_SYSCLK \
0x00000000 // System Clock
#define SYSCTL_DIVSCLK_SRC_PIOSC \
0x00010000 // PIOSC
#define SYSCTL_DIVSCLK_SRC_MOSC 0x00020000 // MOSC
#define SYSCTL_DIVSCLK_DIV_M 0x000000FF // Divisor Value
#define SYSCTL_DIVSCLK_DIV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SYSPROP register.
//
//*****************************************************************************
#define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PIOSCCAL
// register.
//
//*****************************************************************************
#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value
#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration
#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim
#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value
#define SYSCTL_PIOSCCAL_UT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT
// register.
//
//*****************************************************************************
#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value
#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result
#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been
// attempted
#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation
// completed to meet 1% accuracy
#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation
// failed to meet 1% accuracy
#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value
#define SYSCTL_PIOSCSTAT_DT_S 16
#define SYSCTL_PIOSCSTAT_CT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ0
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ0_PLLPWR 0x00800000 // PLL Power
#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value
#define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value
#define SYSCTL_PLLFREQ0_MFRAC_S 10
#define SYSCTL_PLLFREQ0_MINT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ1
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value
#define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value
#define SYSCTL_PLLFREQ1_Q_S 8
#define SYSCTL_PLLFREQ1_N_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLSTAT register.
//
//*****************************************************************************
#define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SLPPWRCFG
// register.
//
//*****************************************************************************
#define SYSCTL_SLPPWRCFG_FLASHPM_M \
0x00000030 // Flash Power Modes
#define SYSCTL_SLPPWRCFG_FLASHPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_SLPPWRCFG_FLASHPM_SLP \
0x00000020 // Low Power Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_M \
0x00000003 // SRAM Power Modes
#define SYSCTL_SLPPWRCFG_SRAMPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_SBY \
0x00000001 // Standby Mode
#define SYSCTL_SLPPWRCFG_SRAMPM_LP \
0x00000003 // Low Power Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSLPPWRCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSLPPWRCFG_LDOSM 0x00000200 // LDO Sleep Mode
#define SYSCTL_DSLPPWRCFG_TSPD 0x00000100 // Temperature Sense Power Down
#define SYSCTL_DSLPPWRCFG_FLASHPM_M \
0x00000030 // Flash Power Modes
#define SYSCTL_DSLPPWRCFG_FLASHPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_DSLPPWRCFG_FLASHPM_SLP \
0x00000020 // Low Power Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_M \
0x00000003 // SRAM Power Modes
#define SYSCTL_DSLPPWRCFG_SRAMPM_NRM \
0x00000000 // Active Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_SBY \
0x00000001 // Standby Mode
#define SYSCTL_DSLPPWRCFG_SRAMPM_LP \
0x00000003 // Low Power Mode
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC9 register.
//
//*****************************************************************************
#define SYSCTL_DC9_ADC1DC7 0x00800000 // ADC1 DC7 Present
#define SYSCTL_DC9_ADC1DC6 0x00400000 // ADC1 DC6 Present
#define SYSCTL_DC9_ADC1DC5 0x00200000 // ADC1 DC5 Present
#define SYSCTL_DC9_ADC1DC4 0x00100000 // ADC1 DC4 Present
#define SYSCTL_DC9_ADC1DC3 0x00080000 // ADC1 DC3 Present
#define SYSCTL_DC9_ADC1DC2 0x00040000 // ADC1 DC2 Present
#define SYSCTL_DC9_ADC1DC1 0x00020000 // ADC1 DC1 Present
#define SYSCTL_DC9_ADC1DC0 0x00010000 // ADC1 DC0 Present
#define SYSCTL_DC9_ADC0DC7 0x00000080 // ADC0 DC7 Present
#define SYSCTL_DC9_ADC0DC6 0x00000040 // ADC0 DC6 Present
#define SYSCTL_DC9_ADC0DC5 0x00000020 // ADC0 DC5 Present
#define SYSCTL_DC9_ADC0DC4 0x00000010 // ADC0 DC4 Present
#define SYSCTL_DC9_ADC0DC3 0x00000008 // ADC0 DC3 Present
#define SYSCTL_DC9_ADC0DC2 0x00000004 // ADC0 DC2 Present
#define SYSCTL_DC9_ADC0DC1 0x00000002 // ADC0 DC1 Present
#define SYSCTL_DC9_ADC0DC0 0x00000001 // ADC0 DC0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_NVMSTAT register.
//
//*****************************************************************************
#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer
// Available
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDOSPCTL
// register.
//
//*****************************************************************************
#define SYSCTL_LDOSPCTL_VADJEN 0x80000000 // Voltage Adjust Enable
#define SYSCTL_LDOSPCTL_VLDO_M 0x000000FF // LDO Output Voltage
#define SYSCTL_LDOSPCTL_VLDO_0_90V \
0x00000012 // 0.90 V
#define SYSCTL_LDOSPCTL_VLDO_0_95V \
0x00000013 // 0.95 V
#define SYSCTL_LDOSPCTL_VLDO_1_00V \
0x00000014 // 1.00 V
#define SYSCTL_LDOSPCTL_VLDO_1_05V \
0x00000015 // 1.05 V
#define SYSCTL_LDOSPCTL_VLDO_1_10V \
0x00000016 // 1.10 V
#define SYSCTL_LDOSPCTL_VLDO_1_15V \
0x00000017 // 1.15 V
#define SYSCTL_LDOSPCTL_VLDO_1_20V \
0x00000018 // 1.20 V
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LDODPCTL
// register.
//
//*****************************************************************************
#define SYSCTL_LDODPCTL_VADJEN 0x80000000 // Voltage Adjust Enable
#define SYSCTL_LDODPCTL_VLDO_M 0x000000FF // LDO Output Voltage
#define SYSCTL_LDODPCTL_VLDO_0_90V \
0x00000012 // 0.90 V
#define SYSCTL_LDODPCTL_VLDO_0_95V \
0x00000013 // 0.95 V
#define SYSCTL_LDODPCTL_VLDO_1_00V \
0x00000014 // 1.00 V
#define SYSCTL_LDODPCTL_VLDO_1_05V \
0x00000015 // 1.05 V
#define SYSCTL_LDODPCTL_VLDO_1_10V \
0x00000016 // 1.10 V
#define SYSCTL_LDODPCTL_VLDO_1_15V \
0x00000017 // 1.15 V
#define SYSCTL_LDODPCTL_VLDO_1_20V \
0x00000018 // 1.20 V
#define SYSCTL_LDODPCTL_VLDO_1_25V \
0x00000019 // 1.25 V
#define SYSCTL_LDODPCTL_VLDO_1_30V \
0x0000001A // 1.30 V
#define SYSCTL_LDODPCTL_VLDO_1_35V \
0x0000001B // 1.35 V
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RESBEHAVCTL
// register.
//
//*****************************************************************************
#define SYSCTL_RESBEHAVCTL_WDOG1_M \
0x000000C0 // Watchdog 1 Reset Operation
#define SYSCTL_RESBEHAVCTL_WDOG1_SYSRST \
0x00000080 // Watchdog 1 issues a system
// reset. The application starts
// within 10 us
#define SYSCTL_RESBEHAVCTL_WDOG1_POR \
0x000000C0 // Watchdog 1 issues a simulated
// POR sequence. Application starts
// less than 500 us after
// deassertion (Default)
#define SYSCTL_RESBEHAVCTL_WDOG0_M \
0x00000030 // Watchdog 0 Reset Operation
#define SYSCTL_RESBEHAVCTL_WDOG0_SYSRST \
0x00000020 // Watchdog 0 issues a system
// reset. The application starts
// within 10 us
#define SYSCTL_RESBEHAVCTL_WDOG0_POR \
0x00000030 // Watchdog 0 issues a simulated
// POR sequence. Application starts
// less than 500 us after
// deassertion (Default)
#define SYSCTL_RESBEHAVCTL_BOR_M \
0x0000000C // BOR Reset operation
#define SYSCTL_RESBEHAVCTL_BOR_SYSRST \
0x00000008 // Brown Out Reset issues system
// reset. The application starts
// within 10 us
#define SYSCTL_RESBEHAVCTL_BOR_POR \
0x0000000C // Brown Out Reset issues a
// simulated POR sequence. The
// application starts less than 500
// us after deassertion (Default)
#define SYSCTL_RESBEHAVCTL_EXTRES_M \
0x00000003 // External RST Pin Operation
#define SYSCTL_RESBEHAVCTL_EXTRES_SYSRST \
0x00000002 // External RST assertion issues a
// system reset. The application
// starts within 10 us
#define SYSCTL_RESBEHAVCTL_EXTRES_POR \
0x00000003 // External RST assertion issues a
// simulated POR sequence.
// Application starts less than 500
// us after deassertion (Default)
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_HSSR register.
//
//*****************************************************************************
#define SYSCTL_HSSR_KEY_M 0xFF000000 // Write Key
#define SYSCTL_HSSR_CDOFF_M 0x00FFFFFF // Command Descriptor Pointer
#define SYSCTL_HSSR_KEY_S 24
#define SYSCTL_HSSR_CDOFF_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_USBPDS register.
//
//*****************************************************************************
#define SYSCTL_USBPDS_MEMSTAT_M 0x0000000C // Memory Array Power Status
#define SYSCTL_USBPDS_MEMSTAT_OFF \
0x00000000 // Array OFF
#define SYSCTL_USBPDS_MEMSTAT_RETAIN \
0x00000004 // SRAM Retention
#define SYSCTL_USBPDS_MEMSTAT_ON \
0x0000000C // Array On
#define SYSCTL_USBPDS_PWRSTAT_M 0x00000003 // Power Domain Status
#define SYSCTL_USBPDS_PWRSTAT_OFF \
0x00000000 // OFF
#define SYSCTL_USBPDS_PWRSTAT_ON \
0x00000003 // ON
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_USBMPC register.
//
//*****************************************************************************
#define SYSCTL_USBMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
#define SYSCTL_USBMPC_PWRCTL_OFF \
0x00000000 // Array OFF
#define SYSCTL_USBMPC_PWRCTL_RETAIN \
0x00000001 // SRAM Retention
#define SYSCTL_USBMPC_PWRCTL_ON 0x00000003 // Array On
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_EMACPDS register.
//
//*****************************************************************************
#define SYSCTL_EMACPDS_MEMSTAT_M \
0x0000000C // Memory Array Power Status
#define SYSCTL_EMACPDS_MEMSTAT_OFF \
0x00000000 // Array OFF
#define SYSCTL_EMACPDS_MEMSTAT_ON \
0x0000000C // Array On
#define SYSCTL_EMACPDS_PWRSTAT_M \
0x00000003 // Power Domain Status
#define SYSCTL_EMACPDS_PWRSTAT_OFF \
0x00000000 // OFF
#define SYSCTL_EMACPDS_PWRSTAT_ON \
0x00000003 // ON
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_EMACMPC register.
//
//*****************************************************************************
#define SYSCTL_EMACMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
#define SYSCTL_EMACMPC_PWRCTL_OFF \
0x00000000 // Array OFF
#define SYSCTL_EMACMPC_PWRCTL_ON \
0x00000003 // Array On
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_LCDMPC register.
//
//*****************************************************************************
#define SYSCTL_LCDMPC_PWRCTL_M 0x00000003 // Memory Array Power Control
#define SYSCTL_LCDMPC_PWRCTL_OFF \
0x00000000 // Array OFF
#define SYSCTL_LCDMPC_PWRCTL_ON 0x00000003 // Array On
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPWD register.
//
//*****************************************************************************
#define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present
#define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPTIMER register.
//
//*****************************************************************************
#define SYSCTL_PPTIMER_P7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Present
#define SYSCTL_PPTIMER_P6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Present
#define SYSCTL_PPTIMER_P5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Present
#define SYSCTL_PPTIMER_P4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Present
#define SYSCTL_PPTIMER_P3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Present
#define SYSCTL_PPTIMER_P2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Present
#define SYSCTL_PPTIMER_P1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Present
#define SYSCTL_PPTIMER_P0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPGPIO register.
//
//*****************************************************************************
#define SYSCTL_PPGPIO_P17 0x00020000 // GPIO Port T Present
#define SYSCTL_PPGPIO_P16 0x00010000 // GPIO Port S Present
#define SYSCTL_PPGPIO_P15 0x00008000 // GPIO Port R Present
#define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present
#define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present
#define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present
#define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present
#define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present
#define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present
#define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present
#define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present
#define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present
#define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present
#define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present
#define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present
#define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present
#define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present
#define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPDMA register.
//
//*****************************************************************************
#define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEPI register.
//
//*****************************************************************************
#define SYSCTL_PPEPI_P0 0x00000001 // EPI Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPHIB register.
//
//*****************************************************************************
#define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUART register.
//
//*****************************************************************************
#define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present
#define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present
#define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present
#define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present
#define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present
#define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present
#define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present
#define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPSSI register.
//
//*****************************************************************************
#define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present
#define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present
#define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present
#define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPI2C register.
//
//*****************************************************************************
#define SYSCTL_PPI2C_P9 0x00000200 // I2C Module 9 Present
#define SYSCTL_PPI2C_P8 0x00000100 // I2C Module 8 Present
#define SYSCTL_PPI2C_P7 0x00000080 // I2C Module 7 Present
#define SYSCTL_PPI2C_P6 0x00000040 // I2C Module 6 Present
#define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present
#define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present
#define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present
#define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present
#define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present
#define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUSB register.
//
//*****************************************************************************
#define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEPHY register.
//
//*****************************************************************************
#define SYSCTL_PPEPHY_P0 0x00000001 // Ethernet PHY Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPCAN register.
//
//*****************************************************************************
#define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present
#define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPADC register.
//
//*****************************************************************************
#define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present
#define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPACMP register.
//
//*****************************************************************************
#define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPPWM register.
//
//*****************************************************************************
#define SYSCTL_PPPWM_P1 0x00000002 // PWM Module 1 Present
#define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPQEI register.
//
//*****************************************************************************
#define SYSCTL_PPQEI_P1 0x00000002 // QEI Module 1 Present
#define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPLPC register.
//
//*****************************************************************************
#define SYSCTL_PPLPC_P0 0x00000001 // LPC Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPPECI register.
//
//*****************************************************************************
#define SYSCTL_PPPECI_P0 0x00000001 // PECI Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPFAN register.
//
//*****************************************************************************
#define SYSCTL_PPFAN_P0 0x00000001 // FAN Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_PPWTIMER_P5 0x00000020 // 32/64-Bit Wide General-Purpose
// Timer 5 Present
#define SYSCTL_PPWTIMER_P4 0x00000010 // 32/64-Bit Wide General-Purpose
// Timer 4 Present
#define SYSCTL_PPWTIMER_P3 0x00000008 // 32/64-Bit Wide General-Purpose
// Timer 3 Present
#define SYSCTL_PPWTIMER_P2 0x00000004 // 32/64-Bit Wide General-Purpose
// Timer 2 Present
#define SYSCTL_PPWTIMER_P1 0x00000002 // 32/64-Bit Wide General-Purpose
// Timer 1 Present
#define SYSCTL_PPWTIMER_P0 0x00000001 // 32/64-Bit Wide General-Purpose
// Timer 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPRTS register.
//
//*****************************************************************************
#define SYSCTL_PPRTS_P0 0x00000001 // RTS Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPCCM register.
//
//*****************************************************************************
#define SYSCTL_PPCCM_P0 0x00000001 // CRC and Cryptographic Modules
// Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPLCD register.
//
//*****************************************************************************
#define SYSCTL_PPLCD_P0 0x00000001 // LCD Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPOWIRE register.
//
//*****************************************************************************
#define SYSCTL_PPOWIRE_P0 0x00000001 // 1-Wire Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEMAC register.
//
//*****************************************************************************
#define SYSCTL_PPEMAC_P0 0x00000001 // Ethernet Controller Module
// Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPHIM register.
//
//*****************************************************************************
#define SYSCTL_PPHIM_P0 0x00000001 // HIM Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRWD register.
//
//*****************************************************************************
#define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset
#define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRTIMER register.
//
//*****************************************************************************
#define SYSCTL_SRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Software Reset
#define SYSCTL_SRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Software Reset
#define SYSCTL_SRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Software Reset
#define SYSCTL_SRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Software Reset
#define SYSCTL_SRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Software Reset
#define SYSCTL_SRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Software Reset
#define SYSCTL_SRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Software Reset
#define SYSCTL_SRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRGPIO register.
//
//*****************************************************************************
#define SYSCTL_SRGPIO_R17 0x00020000 // GPIO Port T Software Reset
#define SYSCTL_SRGPIO_R16 0x00010000 // GPIO Port S Software Reset
#define SYSCTL_SRGPIO_R15 0x00008000 // GPIO Port R Software Reset
#define SYSCTL_SRGPIO_R14 0x00004000 // GPIO Port Q Software Reset
#define SYSCTL_SRGPIO_R13 0x00002000 // GPIO Port P Software Reset
#define SYSCTL_SRGPIO_R12 0x00001000 // GPIO Port N Software Reset
#define SYSCTL_SRGPIO_R11 0x00000800 // GPIO Port M Software Reset
#define SYSCTL_SRGPIO_R10 0x00000400 // GPIO Port L Software Reset
#define SYSCTL_SRGPIO_R9 0x00000200 // GPIO Port K Software Reset
#define SYSCTL_SRGPIO_R8 0x00000100 // GPIO Port J Software Reset
#define SYSCTL_SRGPIO_R7 0x00000080 // GPIO Port H Software Reset
#define SYSCTL_SRGPIO_R6 0x00000040 // GPIO Port G Software Reset
#define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset
#define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset
#define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset
#define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset
#define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset
#define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRDMA register.
//
//*****************************************************************************
#define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREPI register.
//
//*****************************************************************************
#define SYSCTL_SREPI_R0 0x00000001 // EPI Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRHIB register.
//
//*****************************************************************************
#define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software
// Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRUART register.
//
//*****************************************************************************
#define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset
#define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset
#define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset
#define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset
#define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset
#define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset
#define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset
#define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRSSI register.
//
//*****************************************************************************
#define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset
#define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset
#define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset
#define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRI2C register.
//
//*****************************************************************************
#define SYSCTL_SRI2C_R9 0x00000200 // I2C Module 9 Software Reset
#define SYSCTL_SRI2C_R8 0x00000100 // I2C Module 8 Software Reset
#define SYSCTL_SRI2C_R7 0x00000080 // I2C Module 7 Software Reset
#define SYSCTL_SRI2C_R6 0x00000040 // I2C Module 6 Software Reset
#define SYSCTL_SRI2C_R5 0x00000020 // I2C Module 5 Software Reset
#define SYSCTL_SRI2C_R4 0x00000010 // I2C Module 4 Software Reset
#define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset
#define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset
#define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset
#define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRUSB register.
//
//*****************************************************************************
#define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREPHY register.
//
//*****************************************************************************
#define SYSCTL_SREPHY_R0 0x00000001 // Ethernet PHY Module Software
// Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCAN register.
//
//*****************************************************************************
#define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset
#define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRADC register.
//
//*****************************************************************************
#define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset
#define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRACMP register.
//
//*****************************************************************************
#define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module 0
// Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRPWM register.
//
//*****************************************************************************
#define SYSCTL_SRPWM_R1 0x00000002 // PWM Module 1 Software Reset
#define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRQEI register.
//
//*****************************************************************************
#define SYSCTL_SRQEI_R1 0x00000002 // QEI Module 1 Software Reset
#define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose
// Timer 5 Software Reset
#define SYSCTL_SRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose
// Timer 4 Software Reset
#define SYSCTL_SRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose
// Timer 3 Software Reset
#define SYSCTL_SRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose
// Timer 2 Software Reset
#define SYSCTL_SRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose
// Timer 1 Software Reset
#define SYSCTL_SRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose
// Timer 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCCM register.
//
//*****************************************************************************
#define SYSCTL_SRCCM_R0 0x00000001 // CRC and Cryptographic Modules
// Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRLCD register.
//
//*****************************************************************************
#define SYSCTL_SRLCD_R0 0x00000001 // LCD Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SROWIRE register.
//
//*****************************************************************************
#define SYSCTL_SROWIRE_R0 0x00000001 // 1-Wire Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREMAC register.
//
//*****************************************************************************
#define SYSCTL_SREMAC_R0 0x00000001 // Ethernet Controller MAC Module 0
// Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCWD register.
//
//*****************************************************************************
#define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Run Mode Clock Gating Control
#define SYSCTL_RCGCTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Run Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCGPIO_R17 0x00020000 // GPIO Port T Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R16 0x00010000 // GPIO Port S Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R15 0x00008000 // GPIO Port R Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R14 0x00004000 // GPIO Port Q Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R13 0x00002000 // GPIO Port P Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R12 0x00001000 // GPIO Port N Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R11 0x00000800 // GPIO Port M Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R10 0x00000400 // GPIO Port L Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R9 0x00000200 // GPIO Port K Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R8 0x00000100 // GPIO Port J Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R7 0x00000080 // GPIO Port H Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R6 0x00000040 // GPIO Port G Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEPI register.
//
//*****************************************************************************
#define SYSCTL_RCGCEPI_R0 0x00000001 // EPI Module Run Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_RCGCI2C_R9 0x00000200 // I2C Module 9 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R8 0x00000100 // I2C Module 8 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R7 0x00000080 // I2C Module 7 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R6 0x00000040 // I2C Module 6 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R5 0x00000020 // I2C Module 5 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R4 0x00000010 // I2C Module 4 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEPHY
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEPHY_R0 0x00000001 // Ethernet PHY Module Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCADC register.
//
//*****************************************************************************
#define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module 0 Run
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_RCGCPWM_R1 0x00000002 // PWM Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_RCGCQEI_R1 0x00000002 // QEI Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose
// Timer 5 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose
// Timer 4 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose
// Timer 3 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose
// Timer 2 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose
// Timer 1 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose
// Timer 0 Run Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCCCM register.
//
//*****************************************************************************
#define SYSCTL_RCGCCCM_R0 0x00000001 // CRC and Cryptographic Modules
// Run Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCLCD register.
//
//*****************************************************************************
#define SYSCTL_RCGCLCD_R0 0x00000001 // LCD Controller Module 0 Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCOWIRE
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCOWIRE_R0 0x00000001 // 1-Wire Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEMAC
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEMAC_R0 0x00000001 // Ethernet MAC Module 0 Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCWD register.
//
//*****************************************************************************
#define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCTIMER_S7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCGPIO_S17 0x00020000 // GPIO Port T Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S16 0x00010000 // GPIO Port S Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S15 0x00008000 // GPIO Port R Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S14 0x00004000 // GPIO Port Q Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S13 0x00002000 // GPIO Port P Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S12 0x00001000 // GPIO Port N Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S11 0x00000800 // GPIO Port M Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S10 0x00000400 // GPIO Port L Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S9 0x00000200 // GPIO Port K Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S8 0x00000100 // GPIO Port J Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S7 0x00000080 // GPIO Port H Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S6 0x00000040 // GPIO Port G Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEPI register.
//
//*****************************************************************************
#define SYSCTL_SCGCEPI_S0 0x00000001 // EPI Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_SCGCI2C_S9 0x00000200 // I2C Module 9 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S8 0x00000100 // I2C Module 8 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S7 0x00000080 // I2C Module 7 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S6 0x00000040 // I2C Module 6 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S5 0x00000020 // I2C Module 5 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S4 0x00000010 // I2C Module 4 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEPHY
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEPHY_S0 0x00000001 // PHY Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCADC register.
//
//*****************************************************************************
#define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module 0 Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_SCGCPWM_S1 0x00000002 // PWM Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_SCGCQEI_S1 0x00000002 // QEI Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCWTIMER_S5 0x00000020 // 32/64-Bit Wide General-Purpose
// Timer 5 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCWTIMER_S4 0x00000010 // 32/64-Bit Wide General-Purpose
// Timer 4 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCWTIMER_S3 0x00000008 // 32/64-Bit Wide General-Purpose
// Timer 3 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCWTIMER_S2 0x00000004 // 32/64-Bit Wide General-Purpose
// Timer 2 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCWTIMER_S1 0x00000002 // 32/64-Bit Wide General-Purpose
// Timer 1 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCWTIMER_S0 0x00000001 // 32/64-Bit Wide General-Purpose
// Timer 0 Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCCCM register.
//
//*****************************************************************************
#define SYSCTL_SCGCCCM_S0 0x00000001 // CRC and Cryptographic Modules
// Sleep Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCLCD register.
//
//*****************************************************************************
#define SYSCTL_SCGCLCD_S0 0x00000001 // LCD Controller Module 0 Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCOWIRE
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCOWIRE_S0 0x00000001 // 1-Wire Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEMAC
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEMAC_S0 0x00000001 // Ethernet MAC Module 0 Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCWD register.
//
//*****************************************************************************
#define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCTIMER_D7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCTIMER_D0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCGPIO_D17 0x00020000 // GPIO Port T Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D16 0x00010000 // GPIO Port S Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D15 0x00008000 // GPIO Port R Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D14 0x00004000 // GPIO Port Q Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D13 0x00002000 // GPIO Port P Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D12 0x00001000 // GPIO Port N Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D11 0x00000800 // GPIO Port M Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D10 0x00000400 // GPIO Port L Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D9 0x00000200 // GPIO Port K Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D8 0x00000100 // GPIO Port J Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D7 0x00000080 // GPIO Port H Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D6 0x00000040 // GPIO Port G Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEPI register.
//
//*****************************************************************************
#define SYSCTL_DCGCEPI_D0 0x00000001 // EPI Module Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_DCGCI2C_D9 0x00000200 // I2C Module 9 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D8 0x00000100 // I2C Module 8 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D7 0x00000080 // I2C Module 7 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D6 0x00000040 // I2C Module 6 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D5 0x00000020 // I2C Module 5 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D4 0x00000010 // I2C Module 4 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEPHY
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEPHY_D0 0x00000001 // PHY Module Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCADC register.
//
//*****************************************************************************
#define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module 0
// Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_DCGCPWM_D1 0x00000002 // PWM Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_DCGCQEI_D1 0x00000002 // QEI Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCWTIMER_D5 0x00000020 // 32/64-Bit Wide General-Purpose
// Timer 5 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWTIMER_D4 0x00000010 // 32/64-Bit Wide General-Purpose
// Timer 4 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWTIMER_D3 0x00000008 // 32/64-Bit Wide General-Purpose
// Timer 3 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWTIMER_D2 0x00000004 // 32/64-Bit Wide General-Purpose
// Timer 2 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWTIMER_D1 0x00000002 // 32/64-Bit Wide General-Purpose
// Timer 1 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWTIMER_D0 0x00000001 // 32/64-Bit Wide General-Purpose
// Timer 0 Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCCCM register.
//
//*****************************************************************************
#define SYSCTL_DCGCCCM_D0 0x00000001 // CRC and Cryptographic Modules
// Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCLCD register.
//
//*****************************************************************************
#define SYSCTL_DCGCLCD_D0 0x00000001 // LCD Controller Module 0
// Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCOWIRE
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCOWIRE_D0 0x00000001 // 1-Wire Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEMAC
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEMAC_D0 0x00000001 // Ethernet MAC Module 0 Deep-Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCWD register.
//
//*****************************************************************************
#define SYSCTL_PCWD_P1 0x00000002 // Watchdog Timer 1 Power Control
#define SYSCTL_PCWD_P0 0x00000001 // Watchdog Timer 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCTIMER register.
//
//*****************************************************************************
#define SYSCTL_PCTIMER_P7 0x00000080 // General-Purpose Timer 7 Power
// Control
#define SYSCTL_PCTIMER_P6 0x00000040 // General-Purpose Timer 6 Power
// Control
#define SYSCTL_PCTIMER_P5 0x00000020 // General-Purpose Timer 5 Power
// Control
#define SYSCTL_PCTIMER_P4 0x00000010 // General-Purpose Timer 4 Power
// Control
#define SYSCTL_PCTIMER_P3 0x00000008 // General-Purpose Timer 3 Power
// Control
#define SYSCTL_PCTIMER_P2 0x00000004 // General-Purpose Timer 2 Power
// Control
#define SYSCTL_PCTIMER_P1 0x00000002 // General-Purpose Timer 1 Power
// Control
#define SYSCTL_PCTIMER_P0 0x00000001 // General-Purpose Timer 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCGPIO register.
//
//*****************************************************************************
#define SYSCTL_PCGPIO_P17 0x00020000 // GPIO Port T Power Control
#define SYSCTL_PCGPIO_P16 0x00010000 // GPIO Port S Power Control
#define SYSCTL_PCGPIO_P15 0x00008000 // GPIO Port R Power Control
#define SYSCTL_PCGPIO_P14 0x00004000 // GPIO Port Q Power Control
#define SYSCTL_PCGPIO_P13 0x00002000 // GPIO Port P Power Control
#define SYSCTL_PCGPIO_P12 0x00001000 // GPIO Port N Power Control
#define SYSCTL_PCGPIO_P11 0x00000800 // GPIO Port M Power Control
#define SYSCTL_PCGPIO_P10 0x00000400 // GPIO Port L Power Control
#define SYSCTL_PCGPIO_P9 0x00000200 // GPIO Port K Power Control
#define SYSCTL_PCGPIO_P8 0x00000100 // GPIO Port J Power Control
#define SYSCTL_PCGPIO_P7 0x00000080 // GPIO Port H Power Control
#define SYSCTL_PCGPIO_P6 0x00000040 // GPIO Port G Power Control
#define SYSCTL_PCGPIO_P5 0x00000020 // GPIO Port F Power Control
#define SYSCTL_PCGPIO_P4 0x00000010 // GPIO Port E Power Control
#define SYSCTL_PCGPIO_P3 0x00000008 // GPIO Port D Power Control
#define SYSCTL_PCGPIO_P2 0x00000004 // GPIO Port C Power Control
#define SYSCTL_PCGPIO_P1 0x00000002 // GPIO Port B Power Control
#define SYSCTL_PCGPIO_P0 0x00000001 // GPIO Port A Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCDMA register.
//
//*****************************************************************************
#define SYSCTL_PCDMA_P0 0x00000001 // uDMA Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEPI register.
//
//*****************************************************************************
#define SYSCTL_PCEPI_P0 0x00000001 // EPI Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCHIB register.
//
//*****************************************************************************
#define SYSCTL_PCHIB_P0 0x00000001 // Hibernation Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCUART register.
//
//*****************************************************************************
#define SYSCTL_PCUART_P7 0x00000080 // UART Module 7 Power Control
#define SYSCTL_PCUART_P6 0x00000040 // UART Module 6 Power Control
#define SYSCTL_PCUART_P5 0x00000020 // UART Module 5 Power Control
#define SYSCTL_PCUART_P4 0x00000010 // UART Module 4 Power Control
#define SYSCTL_PCUART_P3 0x00000008 // UART Module 3 Power Control
#define SYSCTL_PCUART_P2 0x00000004 // UART Module 2 Power Control
#define SYSCTL_PCUART_P1 0x00000002 // UART Module 1 Power Control
#define SYSCTL_PCUART_P0 0x00000001 // UART Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCSSI register.
//
//*****************************************************************************
#define SYSCTL_PCSSI_P3 0x00000008 // SSI Module 3 Power Control
#define SYSCTL_PCSSI_P2 0x00000004 // SSI Module 2 Power Control
#define SYSCTL_PCSSI_P1 0x00000002 // SSI Module 1 Power Control
#define SYSCTL_PCSSI_P0 0x00000001 // SSI Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCI2C register.
//
//*****************************************************************************
#define SYSCTL_PCI2C_P9 0x00000200 // I2C Module 9 Power Control
#define SYSCTL_PCI2C_P8 0x00000100 // I2C Module 8 Power Control
#define SYSCTL_PCI2C_P7 0x00000080 // I2C Module 7 Power Control
#define SYSCTL_PCI2C_P6 0x00000040 // I2C Module 6 Power Control
#define SYSCTL_PCI2C_P5 0x00000020 // I2C Module 5 Power Control
#define SYSCTL_PCI2C_P4 0x00000010 // I2C Module 4 Power Control
#define SYSCTL_PCI2C_P3 0x00000008 // I2C Module 3 Power Control
#define SYSCTL_PCI2C_P2 0x00000004 // I2C Module 2 Power Control
#define SYSCTL_PCI2C_P1 0x00000002 // I2C Module 1 Power Control
#define SYSCTL_PCI2C_P0 0x00000001 // I2C Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCUSB register.
//
//*****************************************************************************
#define SYSCTL_PCUSB_P0 0x00000001 // USB Module Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEPHY register.
//
//*****************************************************************************
#define SYSCTL_PCEPHY_P0 0x00000001 // Ethernet PHY Module Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCCAN register.
//
//*****************************************************************************
#define SYSCTL_PCCAN_P1 0x00000002 // CAN Module 1 Power Control
#define SYSCTL_PCCAN_P0 0x00000001 // CAN Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCADC register.
//
//*****************************************************************************
#define SYSCTL_PCADC_P1 0x00000002 // ADC Module 1 Power Control
#define SYSCTL_PCADC_P0 0x00000001 // ADC Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCACMP register.
//
//*****************************************************************************
#define SYSCTL_PCACMP_P0 0x00000001 // Analog Comparator Module 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCPWM register.
//
//*****************************************************************************
#define SYSCTL_PCPWM_P0 0x00000001 // PWM Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCQEI register.
//
//*****************************************************************************
#define SYSCTL_PCQEI_P0 0x00000001 // QEI Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PCEEPROM_P0 0x00000001 // EEPROM Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCCCM register.
//
//*****************************************************************************
#define SYSCTL_PCCCM_P0 0x00000001 // CRC and Cryptographic Modules
// Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCLCD register.
//
//*****************************************************************************
#define SYSCTL_PCLCD_P0 0x00000001 // LCD Controller Module 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCOWIRE register.
//
//*****************************************************************************
#define SYSCTL_PCOWIRE_P0 0x00000001 // 1-Wire Module 0 Power Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PCEMAC register.
//
//*****************************************************************************
#define SYSCTL_PCEMAC_P0 0x00000001 // Ethernet MAC Module 0 Power
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRWD register.
//
//*****************************************************************************
#define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral
// Ready
#define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRTIMER register.
//
//*****************************************************************************
#define SYSCTL_PRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer
// 7 Peripheral Ready
#define SYSCTL_PRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer
// 6 Peripheral Ready
#define SYSCTL_PRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer
// 5 Peripheral Ready
#define SYSCTL_PRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer
// 4 Peripheral Ready
#define SYSCTL_PRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer
// 3 Peripheral Ready
#define SYSCTL_PRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer
// 2 Peripheral Ready
#define SYSCTL_PRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer
// 1 Peripheral Ready
#define SYSCTL_PRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer
// 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRGPIO register.
//
//*****************************************************************************
#define SYSCTL_PRGPIO_R17 0x00020000 // GPIO Port T Peripheral Ready
#define SYSCTL_PRGPIO_R16 0x00010000 // GPIO Port S Peripheral Ready
#define SYSCTL_PRGPIO_R15 0x00008000 // GPIO Port R Peripheral Ready
#define SYSCTL_PRGPIO_R14 0x00004000 // GPIO Port Q Peripheral Ready
#define SYSCTL_PRGPIO_R13 0x00002000 // GPIO Port P Peripheral Ready
#define SYSCTL_PRGPIO_R12 0x00001000 // GPIO Port N Peripheral Ready
#define SYSCTL_PRGPIO_R11 0x00000800 // GPIO Port M Peripheral Ready
#define SYSCTL_PRGPIO_R10 0x00000400 // GPIO Port L Peripheral Ready
#define SYSCTL_PRGPIO_R9 0x00000200 // GPIO Port K Peripheral Ready
#define SYSCTL_PRGPIO_R8 0x00000100 // GPIO Port J Peripheral Ready
#define SYSCTL_PRGPIO_R7 0x00000080 // GPIO Port H Peripheral Ready
#define SYSCTL_PRGPIO_R6 0x00000040 // GPIO Port G Peripheral Ready
#define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready
#define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready
#define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready
#define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready
#define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready
#define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRDMA register.
//
//*****************************************************************************
#define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREPI register.
//
//*****************************************************************************
#define SYSCTL_PREPI_R0 0x00000001 // EPI Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRHIB register.
//
//*****************************************************************************
#define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRUART register.
//
//*****************************************************************************
#define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready
#define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready
#define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready
#define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready
#define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready
#define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready
#define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready
#define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRSSI register.
//
//*****************************************************************************
#define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready
#define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready
#define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready
#define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRI2C register.
//
//*****************************************************************************
#define SYSCTL_PRI2C_R9 0x00000200 // I2C Module 9 Peripheral Ready
#define SYSCTL_PRI2C_R8 0x00000100 // I2C Module 8 Peripheral Ready
#define SYSCTL_PRI2C_R7 0x00000080 // I2C Module 7 Peripheral Ready
#define SYSCTL_PRI2C_R6 0x00000040 // I2C Module 6 Peripheral Ready
#define SYSCTL_PRI2C_R5 0x00000020 // I2C Module 5 Peripheral Ready
#define SYSCTL_PRI2C_R4 0x00000010 // I2C Module 4 Peripheral Ready
#define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready
#define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready
#define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready
#define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRUSB register.
//
//*****************************************************************************
#define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREPHY register.
//
//*****************************************************************************
#define SYSCTL_PREPHY_R0 0x00000001 // Ethernet PHY Module Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRCAN register.
//
//*****************************************************************************
#define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready
#define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRADC register.
//
//*****************************************************************************
#define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready
#define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRACMP register.
//
//*****************************************************************************
#define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module 0
// Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRPWM register.
//
//*****************************************************************************
#define SYSCTL_PRPWM_R1 0x00000002 // PWM Module 1 Peripheral Ready
#define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRQEI register.
//
//*****************************************************************************
#define SYSCTL_PRQEI_R1 0x00000002 // QEI Module 1 Peripheral Ready
#define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_PRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose
// Timer 5 Peripheral Ready
#define SYSCTL_PRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose
// Timer 4 Peripheral Ready
#define SYSCTL_PRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose
// Timer 3 Peripheral Ready
#define SYSCTL_PRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose
// Timer 2 Peripheral Ready
#define SYSCTL_PRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose
// Timer 1 Peripheral Ready
#define SYSCTL_PRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose
// Timer 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRCCM register.
//
//*****************************************************************************
#define SYSCTL_PRCCM_R0 0x00000001 // CRC and Cryptographic Modules
// Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRLCD register.
//
//*****************************************************************************
#define SYSCTL_PRLCD_R0 0x00000001 // LCD Controller Module 0
// Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PROWIRE register.
//
//*****************************************************************************
#define SYSCTL_PROWIRE_R0 0x00000001 // 1-Wire Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREMAC register.
//
//*****************************************************************************
#define SYSCTL_PREMAC_R0 0x00000001 // Ethernet MAC Module 0 Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_UNIQUEID0
// register.
//
//*****************************************************************************
#define SYSCTL_UNIQUEID0_ID_M 0xFFFFFFFF // Unique ID
#define SYSCTL_UNIQUEID0_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_UNIQUEID1
// register.
//
//*****************************************************************************
#define SYSCTL_UNIQUEID1_ID_M 0xFFFFFFFF // Unique ID
#define SYSCTL_UNIQUEID1_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_UNIQUEID2
// register.
//
//*****************************************************************************
#define SYSCTL_UNIQUEID2_ID_M 0xFFFFFFFF // Unique ID
#define SYSCTL_UNIQUEID2_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_UNIQUEID3
// register.
//
//*****************************************************************************
#define SYSCTL_UNIQUEID3_ID_M 0xFFFFFFFF // Unique ID
#define SYSCTL_UNIQUEID3_ID_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_CCMCGREQ
// register.
//
//*****************************************************************************
#define SYSCTL_CCMCGREQ_DESCFG 0x00000004 // DES Clock Gating Request
#define SYSCTL_CCMCGREQ_AESCFG 0x00000002 // AES Clock Gating Request
#define SYSCTL_CCMCGREQ_SHACFG 0x00000001 // SHA/MD5 Clock Gating Request
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the SYSCTL_DID0
// register.
//
//*****************************************************************************
#define SYSCTL_DID0_CLASS_BLIZZARD \
0x00050000 // Tiva(TM) C Series TM4C123-class
// microcontrollers
#define SYSCTL_DID0_CLASS_SNOWFLAKE \
0x000A0000 // Tiva(TM) C Series TM4C129-class
// microcontrollers
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the SYSCTL_RESC
// register.
//
//*****************************************************************************
#define SYSCTL_RESC_HIB 0x00000040 // HIB Reset
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the SYSCTL_PWRTC
// register.
//
//*****************************************************************************
#define SYSCTL_PWRTC_VDDA_UBOR0 0x00000010 // VDDA Under BOR0 Status
#define SYSCTL_PWRTC_VDD_UBOR0 0x00000001 // VDD Under BOR0 Status
#endif
#endif // __HW_SYSCTL_H__
Reference in a new issue View git blame Copy permalink