keyboard/qmk/keyboards/maartenwut/atom47/rev2
2020-09-24 23:24:14 -04:00
..
config.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
info.json Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.md Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
rev2.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
rev2.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
rules.mk Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

Atom47 rev2

This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has modified his and put a big spacebar in it.

Support

Keyboard Maintainer: Matthew Kerfoot
Hardware Supported: Atom47 rev2
Hardware Availability: None

Features

  • QMK Firmware
  • In-switch leds
  • Through-hole micro usb connector (less likely to break off!)
  • Easily reachable reset button under the spacebar
  • In-switch CapsLock indicator

Build

To build the default keymap, simply run make atom47/rev2:default.

For an alternative, heavily modified layout you would just need to run make atom47/rev2:LEdiodes.

See build environment setup then the make instructions for more information.