78 lines
2.2 KiB
C
78 lines
2.2 KiB
C
/*
|
|
ChibiOS - Copyright (C) 2016..2018 Theodore Ateba
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
#include "chprintf.h"
|
|
|
|
BaseSequentialStream *chp = (BaseSequentialStream *) &SD1;
|
|
|
|
/*
|
|
* Watchdog dealine set to one second.
|
|
*/
|
|
static const WDGConfig wdgcfg = {
|
|
false, /* WDT use period mode, set true for window mode. */
|
|
WDT_PER_1KCLK_gc, /* Normal timeout period of 1 second. */
|
|
WDT_WPER_1KCLK_gc /* Closed timeout period of 1 second. */
|
|
};
|
|
|
|
/*
|
|
* Application entry point.
|
|
*/
|
|
int main(void) {
|
|
|
|
/*
|
|
* System initializations.
|
|
* - HAL initialization, this also initializes the configured device drivers
|
|
* and performs the board-specific initializations.
|
|
* - Kernel initialization, the main() function becomes a thread and the
|
|
* RTOS is active.
|
|
*/
|
|
halInit();
|
|
chSysInit();
|
|
|
|
/*
|
|
* Configure TX (PINC3) and RX (PIN2) for the USART1.
|
|
*/
|
|
palSetPadMode(IOPORT3, PIN3, PAL_MODE_OUTPUT_PUSHPULL);
|
|
palSetPadMode(IOPORT3, PIN2, PAL_MODE_INPUT_PULLUP);
|
|
|
|
/*
|
|
* Start the Serial driver 1.
|
|
*/
|
|
sdStart(&SD1, NULL);
|
|
|
|
/*
|
|
* Starting the watchdog driver.
|
|
*/
|
|
wdgStart(&WDTD1, &wdgcfg);
|
|
|
|
chprintf(chp, "Watchdog driver test program.\r\n");
|
|
|
|
/*
|
|
* Normal main() thread activity, it resets the watchdog.
|
|
*/
|
|
while (TRUE) {
|
|
chprintf(chp, "Watchdog reset by software.\r\n");
|
|
wdgReset(&WDTD1); // TODO: Rebuild whit this line commented.
|
|
// It will shows you if the board is rebooted
|
|
// by the watchdog.
|
|
palTogglePad(IOPORT5, PORTE_LED);
|
|
chThdSleepMilliseconds(500); // Use for example 2 second of delay to see if the watchdog reset the board every second.
|
|
}
|
|
return 0;
|
|
}
|