1217 lines
79 KiB
C
1217 lines
79 KiB
C
/*
|
|
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining
|
|
* a copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _KL27ZXXX_H_
|
|
#define _KL27ZXXX_H_
|
|
|
|
/**
|
|
* @brief KL2x Interrupt Number Definition, according to the selected device
|
|
* in @ref Library_configuration_section
|
|
*/
|
|
#define __MPU_PRESENT 0
|
|
#define __VTOR_PRESENT 1
|
|
#define __NVIC_PRIO_BITS 2
|
|
#define __Vendor_SysTickConfig 0
|
|
|
|
/*
|
|
* ==============================================================
|
|
* ---------- Interrupt Number Definition -----------------------
|
|
* ==============================================================
|
|
*/
|
|
typedef enum IRQn
|
|
{
|
|
/****** Cortex-M0 Processor Exceptions Numbers ****************/
|
|
Reset_IRQn = -15,
|
|
NonMaskableInt_IRQn = -14,
|
|
HardFault_IRQn = -13,
|
|
SVCall_IRQn = -5,
|
|
PendSV_IRQn = -2,
|
|
SysTick_IRQn = -1,
|
|
|
|
/****** KL2x Specific Interrupt Numbers ***********************/
|
|
DMA0_IRQn = 0,
|
|
DMA1_IRQn = 1,
|
|
DMA2_IRQn = 2,
|
|
DMA3_IRQn = 3,
|
|
Reserved0_IRQn = 4,
|
|
FTFA_IRQn = 5,
|
|
PMC_IRQn = 6,
|
|
LLWU_IRQn = 7,
|
|
I2C0_IRQn = 8,
|
|
I2C1_IRQn = 9,
|
|
SPI0_IRQn = 10,
|
|
SPI1_IRQn = 11,
|
|
LPUART0_IRQn = 12,
|
|
LPUART1_IRQn = 13,
|
|
UART2_IRQn = 14,
|
|
ADC0_IRQn = 15,
|
|
CMP0_IRQn = 16,
|
|
TPM0_IRQn = 17,
|
|
TPM1_IRQn = 18,
|
|
TPM2_IRQn = 19,
|
|
RTC0_IRQn = 20,
|
|
RTC1_IRQn = 21,
|
|
PIT_IRQn = 22,
|
|
I2S0_IRQn = 23,
|
|
USB_IRQn = 24,
|
|
DAC0_IRQn = 25,
|
|
Reserved2_IRQn = 26,
|
|
Reserved3_IRQn = 27,
|
|
LPTMR0_IRQn = 28,
|
|
Reserved4_IRQn = 29,
|
|
PINA_IRQn = 30,
|
|
PINCD_IRQn = 31,
|
|
} IRQn_Type;
|
|
|
|
#include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */
|
|
|
|
/*
|
|
* ==========================================================================
|
|
* ----------- Processor and Core Peripheral Section ------------------------
|
|
* ==========================================================================
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint8_t C1;
|
|
__IO uint8_t C2;
|
|
uint8_t RESERVED0[4];
|
|
__I uint8_t S;
|
|
uint8_t RESERVED1[1];
|
|
__IO uint8_t SC;
|
|
uint8_t RESERVED2[15];
|
|
__IO uint8_t MC;
|
|
} MCGLite_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint32_t SC;
|
|
__IO uint32_t CNT;
|
|
__IO uint32_t MOD;
|
|
struct { // Channels
|
|
__IO uint32_t SC;
|
|
__IO uint32_t V;
|
|
} C[6];
|
|
uint32_t RESERVED0[5];
|
|
__IO uint32_t STATUS;
|
|
uint32_t RESERVED1[7];
|
|
__IO uint32_t POL;
|
|
uint32_t RESERVED2[4];
|
|
__IO uint32_t CONF;
|
|
} TPM_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint8_t S;
|
|
__IO uint8_t BR;
|
|
__IO uint8_t C2;
|
|
__IO uint8_t C1;
|
|
__IO uint8_t ML;
|
|
__IO uint8_t MH;
|
|
__IO uint8_t DL;
|
|
__IO uint8_t DH;
|
|
uint8_t RESERVED0[2];
|
|
__IO uint8_t CI;
|
|
__IO uint8_t C3;
|
|
} SPI_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint8_t A1;
|
|
__IO uint8_t F;
|
|
__IO uint8_t C1;
|
|
__IO uint8_t S;
|
|
__IO uint8_t D;
|
|
__IO uint8_t C2;
|
|
__IO uint8_t FLT;
|
|
__IO uint8_t RA;
|
|
__IO uint8_t SMB;
|
|
__IO uint8_t A2;
|
|
__IO uint8_t SLTH;
|
|
__IO uint8_t SLTL;
|
|
__IO uint8_t S2;
|
|
} I2C_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint32_t BAUD;
|
|
__IO uint32_t STAT;
|
|
__IO uint32_t CTRL;
|
|
__IO uint32_t DATA;
|
|
__IO uint32_t MATCH;
|
|
} LPUART_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint8_t BDH;
|
|
__IO uint8_t BDL;
|
|
__IO uint8_t C1;
|
|
__IO uint8_t C2;
|
|
__I uint8_t S1;
|
|
__IO uint8_t S2;
|
|
__IO uint8_t C3;
|
|
__IO uint8_t D;
|
|
__IO uint8_t MA1;
|
|
__IO uint8_t MA2;
|
|
__IO uint8_t C4;
|
|
__IO uint8_t C5;
|
|
} UART_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__I uint32_t VERID;
|
|
__I uint32_t PARAM;
|
|
__IO uint32_t CTRL;
|
|
uint32_t RESERVED0[1];
|
|
__IO uint32_t SHIFTSTAT;
|
|
__IO uint32_t SHIFTERR;
|
|
__IO uint32_t TIMSTAT;
|
|
uint32_t RESERVED1[1];
|
|
__IO uint32_t SHIFTSIEN;
|
|
__IO uint32_t SHIFTEIEN;
|
|
__IO uint32_t TIMIEN;
|
|
uint32_t RESERVED2[1];
|
|
__IO uint32_t SHIFTSDEN;
|
|
uint32_t RESERVED3[19];
|
|
__IO uint32_t SHIFTCTL[4];
|
|
uint32_t RESERVED4[28];
|
|
__IO uint32_t SHIFTCFG[4];
|
|
uint32_t RESERVED5[60];
|
|
__IO uint32_t SHIFTBUF[4];
|
|
uint32_t RESERVED6[28];
|
|
__IO uint32_t SHIFTBUFBIS[4];
|
|
uint32_t RESERVED7[28];
|
|
__IO uint32_t SHIFTBUFBYS[4];
|
|
uint32_t RESERVED8[28];
|
|
__IO uint32_t SHIFTBUFBBS[4];
|
|
uint32_t RESERVED9[28];
|
|
__IO uint32_t TIMCTL[4];
|
|
uint32_t RESERVED10[28];
|
|
__IO uint32_t TIMCFG[4];
|
|
uint32_t RESERVED11[28];
|
|
__IO uint32_t TIMCMP[4];
|
|
} FlexIO_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__IO uint8_t TRM;
|
|
__IO uint8_t SC;
|
|
} VREF_TypeDef;
|
|
|
|
typedef struct {
|
|
__I uint8_t PERID; // 0x00
|
|
uint8_t RESERVED0[3];
|
|
__I uint8_t IDCOMP; // 0x04
|
|
uint8_t RESERVED1[3];
|
|
__I uint8_t REV; // 0x08
|
|
uint8_t RESERVED2[3];
|
|
__I uint8_t ADDINFO; // 0x0C
|
|
uint8_t RESERVED3[15];
|
|
__IO uint8_t OTGCTL; // 0x1C
|
|
uint8_t RESERVED7[99];
|
|
__IO uint8_t ISTAT; // 0x80
|
|
uint8_t RESERVED8[3];
|
|
__IO uint8_t INTEN; // 0x84
|
|
uint8_t RESERVED9[3];
|
|
__IO uint8_t ERRSTAT; // 0x88
|
|
uint8_t RESERVED10[3];
|
|
__IO uint8_t ERREN; // 0x8C
|
|
uint8_t RESERVED11[3];
|
|
__I uint8_t STAT; // 0x90
|
|
uint8_t RESERVED12[3];
|
|
__IO uint8_t CTL; // 0x94
|
|
uint8_t RESERVED13[3];
|
|
__IO uint8_t ADDR; // 0x98
|
|
uint8_t RESERVED14[3];
|
|
__IO uint8_t BDTPAGE1; // 0x9C
|
|
uint8_t RESERVED15[3];
|
|
__IO uint8_t FRMNUML; // 0xA0
|
|
uint8_t RESERVED16[3];
|
|
__IO uint8_t FRMNUMH; // 0xA4
|
|
uint8_t RESERVED17[11];
|
|
__IO uint8_t BDTPAGE2; // 0xB0
|
|
uint8_t RESERVED20[3];
|
|
__IO uint8_t BDTPAGE3; // 0xB4
|
|
uint8_t RESERVED21[11];
|
|
struct {
|
|
__IO uint8_t V; // 0xC0
|
|
uint8_t RESERVED[3];
|
|
} ENDPT[16];
|
|
__IO uint8_t USBCTRL; // 0x100
|
|
uint8_t RESERVED22[3];
|
|
__I uint8_t OBSERVE; // 0x104
|
|
uint8_t RESERVED23[3];
|
|
__IO uint8_t CONTROL; // 0x108
|
|
uint8_t RESERVED24[3];
|
|
__IO uint8_t USBTRC0; // 0x10C
|
|
uint8_t RESERVED25[7];
|
|
__IO uint8_t USBFRMADJUST; // 0x114
|
|
uint8_t RESERVED26[43];
|
|
__IO uint8_t CLK_RECOVER_CTRL; // 0x140
|
|
uint8_t RESERVED27[3];
|
|
__IO uint8_t CLK_RECOVER_IRC_EN; // 0x144
|
|
uint8_t RESERVED28[15];
|
|
__IO uint8_t CLK_RECOVER_INT_EN; // 0x154
|
|
uint8_t RESERVED29[7];
|
|
__IO uint8_t CLK_RECOVER_INT_STATUS; // 0x15c
|
|
} USBFS_TypeDef;
|
|
|
|
typedef struct
|
|
{
|
|
__I uint8_t SRS0;
|
|
__I uint8_t SRS1;
|
|
uint8_t RESERVED0[2];
|
|
__IO uint8_t RPFC;
|
|
__IO uint8_t RPFW;
|
|
__IO uint8_t FM;
|
|
__IO uint8_t MR;
|
|
__IO uint8_t SSRS0;
|
|
__IO uint8_t SSRS1;
|
|
} RCM_TypeDef;
|
|
|
|
typedef struct {
|
|
__IO uint32_t TCSR; // 0x00
|
|
uint32_t RESERVED0[1];
|
|
__IO uint32_t TCR2; // 0x08
|
|
__IO uint32_t TCR3; // 0x0C
|
|
__IO uint32_t TCR4; // 0x10
|
|
__IO uint32_t TCR5; // 0x14
|
|
uint32_t RESERVED1[2];
|
|
__O uint32_t TDR0; // 0x20
|
|
uint32_t RESERVED2[15];
|
|
__IO uint32_t TMR; // 0x60
|
|
uint32_t RESERVED3[7];
|
|
__IO uint32_t RCSR; // 0x80
|
|
uint32_t RESERVED4[1];
|
|
__IO uint32_t RCR2; // 0x88
|
|
__IO uint32_t RCR3; // 0x8C
|
|
__IO uint32_t RCR4; // 0x90
|
|
__IO uint32_t RCR5; // 0x94
|
|
uint32_t RESERVED5[2];
|
|
__I uint32_t RDR0; // 0xA0
|
|
uint32_t RESERVED6[15];
|
|
__IO uint32_t RMR; // 0xE0
|
|
uint32_t RESERVED7[7];
|
|
__IO uint32_t MCR; // 0x100
|
|
} I2S_TypeDef;
|
|
|
|
/****************************************************************/
|
|
/* Peripheral memory map */
|
|
/****************************************************************/
|
|
#define DMA_BASE ((uint32_t)0x40008100)
|
|
#define FTFA_BASE ((uint32_t)0x40020000)
|
|
#define DMAMUX_BASE ((uint32_t)0x40021000)
|
|
#define I2S0_BASE ((uint32_t)0x4002F000) // TODO: registers not implemented
|
|
#define PIT_BASE ((uint32_t)0x40037000)
|
|
#define LPTPM0_BASE ((uint32_t)0x40038000)
|
|
#define LPTPM1_BASE ((uint32_t)0x40039000)
|
|
#define LPTPM2_BASE ((uint32_t)0x4003A000)
|
|
#define ADC0_BASE ((uint32_t)0x4003B000)
|
|
#define RTC_BASE ((uint32_t)0x4003D000)
|
|
#define DAC0_BASE ((uint32_t)0x4003F000)
|
|
#define LPTMR0_BASE ((uint32_t)0x40040000)
|
|
#define SRF_BASE ((uint32_t)0x40041000)
|
|
#define SIM_BASE ((uint32_t)0x40047000)
|
|
#define PORTA_BASE ((uint32_t)0x40049000)
|
|
#define PORTB_BASE ((uint32_t)0x4004A000)
|
|
#define PORTC_BASE ((uint32_t)0x4004B000)
|
|
#define PORTD_BASE ((uint32_t)0x4004C000)
|
|
#define PORTE_BASE ((uint32_t)0x4004D000)
|
|
#define LPUART0_BASE ((uint32_t)0x40054000)
|
|
#define LPUART1_BASE ((uint32_t)0x40055000)
|
|
#define FLEXIO_BASE ((uint32_t)0x4005F000) // TODO: register defs
|
|
#define MCGLITE_BASE ((uint32_t)0x40064000)
|
|
#define OSC0_BASE ((uint32_t)0x40065000)
|
|
#define I2C0_BASE ((uint32_t)0x40066000)
|
|
#define I2C1_BASE ((uint32_t)0x40067000)
|
|
#define UART2_BASE ((uint32_t)0x4006C000)
|
|
#define USBFS_BASE ((uint32_t)0x40072000)
|
|
#define CMP_BASE ((uint32_t)0x40073000)
|
|
#define VREF_BASE ((uint32_t)0x40074000)
|
|
#define SPI0_BASE ((uint32_t)0x40076000)
|
|
#define SPI1_BASE ((uint32_t)0x40077000)
|
|
#define LLWU_BASE ((uint32_t)0x4007C000)
|
|
#define PMC_BASE ((uint32_t)0x4007D000)
|
|
#define SMC_BASE ((uint32_t)0x4007E000)
|
|
#define RCM_BASE ((uint32_t)0x4007F000)
|
|
#define GPIOA_BASE ((uint32_t)0x400FF000)
|
|
#define GPIOB_BASE ((uint32_t)0x400FF040)
|
|
#define GPIOC_BASE ((uint32_t)0x400FF080)
|
|
#define GPIOD_BASE ((uint32_t)0x400FF0C0)
|
|
#define GPIOE_BASE ((uint32_t)0x400FF100)
|
|
#define MCM_BASE ((uint32_t)0xF0003000)
|
|
|
|
/****************************************************************/
|
|
/* Peripheral declaration */
|
|
/****************************************************************/
|
|
#define DMA ((DMA_TypeDef *) DMA_BASE)
|
|
#define FTFA ((FTFA_TypeDef *) FTFA_BASE)
|
|
#define DMAMUX ((DMAMUX_TypeDef *) DMAMUX_BASE)
|
|
#define I2S0 ((I2S_TypeDef *) I2S0_BASE)
|
|
#define PIT ((PIT_TypeDef *) PIT_BASE)
|
|
#define TPM0 ((TPM_TypeDef *) LPTPM0_BASE)
|
|
#define TPM1 ((TPM_TypeDef *) LPTPM1_BASE)
|
|
#define TPM2 ((TPM_TypeDef *) LPTPM2_BASE)
|
|
#define ADC0 ((ADC_TypeDef *) ADC0_BASE)
|
|
#define RTC0 ((RTC_TypeDef *) RTC0_BASE)
|
|
#define DAC0 ((DAC_TypeDef *) DAC0_BASE)
|
|
#define LPTMR0 ((LPTMR_TypeDef *) LPTMR0_BASE)
|
|
#define TSI0 ((TSI_TypeDef *) TSI0_BASE)
|
|
#define SIM ((SIM_TypeDef *) SIM_BASE)
|
|
#define LLWU ((LLWU_TypeDef *) LLWU_BASE)
|
|
#define PMC ((PMC_TypeDef *) PMC_BASE)
|
|
#define PORTA ((PORT_TypeDef *) PORTA_BASE)
|
|
#define PORTB ((PORT_TypeDef *) PORTB_BASE)
|
|
#define PORTC ((PORT_TypeDef *) PORTC_BASE)
|
|
#define PORTD ((PORT_TypeDef *) PORTD_BASE)
|
|
#define PORTE ((PORT_TypeDef *) PORTE_BASE)
|
|
#define USB0 ((USBFS_TypeDef *) USBFS_BASE)
|
|
#define CMP ((CMP_TypeDef *) CMP_BASE)
|
|
#define VREF ((VREF_TypeDef *) VREF_BASE)
|
|
#define MCG ((MCGLite_TypeDef *) MCGLITE_BASE)
|
|
#define OSC0 ((OSC_TypeDef *) OSC0_BASE)
|
|
#define SPI0 ((SPI_TypeDef *) SPI0_BASE)
|
|
#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
|
|
#define I2C0 ((I2C_TypeDef *) I2C0_BASE)
|
|
#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
|
|
#define LPUART0 ((LPUART_TypeDef *) LPUART0_BASE)
|
|
#define LPUART1 ((LPUART_TypeDef *) LPUART1_BASE)
|
|
#define UART2 ((UART_TypeDef *) UART2_BASE)
|
|
#define FLEXIO ((FlexIO_TypeDef *) FLEXIO_BASE)
|
|
#define SMC ((SMC_TypeDef *) SMC_BASE)
|
|
#define RCM ((RCM_TypeDef *) RCM_BASE)
|
|
#define SYSTEM_REGISTER_FILE ((volatile uint8_t *) SRF_BASE) /* 32 bytes */
|
|
#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
|
|
#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
|
|
#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
|
|
#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
|
|
#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
|
|
#define MCM ((MCM_TypeDef *) MCM_BASE)
|
|
|
|
/****************************************************************/
|
|
/* Peripheral Registers Bits Definition */
|
|
/****************************************************************/
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* System Integration Module (SIM) */
|
|
/* */
|
|
/****************************************************************/
|
|
/********* Bits definition for SIM_SOPT1 register *************/
|
|
#define SIM_SOPT1_USBREGEN ((uint32_t)0x80000000) /*!< USB voltage regulator enable */
|
|
#define SIM_SOPT1_USBSSTBY ((uint32_t)0x40000000) /*!< USB voltage regulator in standby mode during Stop, VLPS, LLS and VLLS modes */
|
|
#define SIM_SOPT1_USBVSTBY ((uint32_t)0x20000000) /*!< USB voltage regulator in standby mode during VLPR and VLPW modes */
|
|
#define SIM_SOPT1_OSC32KSEL_SHIFT 18 /*!< 32K oscillator clock select (shift) */
|
|
#define SIM_SOPT1_OSC32KSEL_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT1_OSC32KSEL_SHIFT)) /*!< 32K oscillator clock select (mask) */
|
|
#define SIM_SOPT1_OSC32KSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_OSC32KSEL_SHIFT) & SIM_SOPT1_OSC32KSEL_MASK)) /*!< 32K oscillator clock select */
|
|
#define SIM_SOPT1_OSC32KOUT_SHIFT 16 /*!< 32K oscillator clock output (shift) */
|
|
#define SIM_SOPT1_OSC32KOUT_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT1_OSC32KSEL_SHIFT)) /*!< 32K oscillator clock output (mask) */
|
|
#define SIM_SOPT1_OSC32KOUT(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT1_OSC32KSEL_SHIFT) & SIM_SOPT1_OSC32KSEL_MASK)) /*!< 32K oscillator clock output */
|
|
|
|
/******* Bits definition for SIM_SOPT1CFG register ************/
|
|
#define SIM_SOPT1CFG_USSWE ((uint32_t)0x04000000) /*!< USB voltage regulator stop standby write enable */
|
|
#define SIM_SOPT1CFG_UVSWE ((uint32_t)0x02000000) /*!< USB voltage regulator VLP standby write enable */
|
|
#define SIM_SOPT1CFG_URWE ((uint32_t)0x01000000) /*!< USB voltage regulator voltage regulator write enable */
|
|
|
|
/******* Bits definition for SIM_SOPT2 register ************/
|
|
#define SIM_SOPT2_LPUART1SRC_SHIFT 28 /*!< LPUART1 clock source select (shift) */
|
|
#define SIM_SOPT2_LPUART1SRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_LPUART1SRC_SHIFT)) /*!< LPUART1 clock source select (mask) */
|
|
#define SIM_SOPT2_LPUART1SRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_LPUART1SRC_SHIFT) & SIM_SOPT2_LPUART1SRC_MASK)) /*!< LPUART1 clock source select */
|
|
#define SIM_SOPT2_LPUART0SRC_SHIFT 26 /*!< LPUART0 clock source select (shift) */
|
|
#define SIM_SOPT2_LPUART0SRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_LPUART0SRC_SHIFT)) /*!< LPUART0 clock source select (mask) */
|
|
#define SIM_SOPT2_LPUART0SRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_LPUART0SRC_SHIFT) & SIM_SOPT2_LPUART0SRC_MASK)) /*!< UART0 clock source select */
|
|
#define SIM_SOPT2_TPMSRC_SHIFT 24 /*!< TPM clock source select (shift) */
|
|
#define SIM_SOPT2_TPMSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_TPMSRC_SHIFT)) /*!< TPM clock source select (mask) */
|
|
#define SIM_SOPT2_TPMSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_TPMSRC_SHIFT) & SIM_SOPT2_TPMSRC_MASK)) /*!< TPM clock source select */
|
|
#define SIM_SOPT2_FLEXIOSRC_SHIFT 22 /*!< FlexIO Module Clock Source Select (shift) */
|
|
#define SIM_SOPT2_FLEXIOSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT2_FLEXIO_SHIFT)) /*!< FlexIO Module Clock Source Select (mask) */
|
|
#define SIM_SOPT2_FLEXIOSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_FLEXIO_SHIFT) & SIM_SOPT2_FLEXIO_MASK)) /*!< FlexIO Module Clock Source Select */
|
|
#define SIM_SOPT2_USBSRC ((uint32_t)0x00040000) /*!< USB clock source select */
|
|
#define SIM_SOPT2_CLKOUTSEL_SHIFT 5 /*!< CLKOUT select (shift) */
|
|
#define SIM_SOPT2_CLKOUTSEL_MASK ((uint32_t)((uint32_t)0x07 << SIM_SOPT2_CLKOUTSEL_SHIFT)) /*!< CLKOUT select (mask) */
|
|
#define SIM_SOPT2_CLKOUTSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT2_CLKOUTSEL_SHIFT) & SIM_SOPT2_CLKOUTSEL_MASK)) /*!< CLKOUT select */
|
|
#define SIM_SOPT2_RTCCLKOUTSEL ((uint32_t)0x00000010) /*!< RTC clock out select */
|
|
|
|
/******* Bits definition for SIM_SOPT4 register ************/
|
|
#define SIM_SOPT4_TPM2CLKSEL ((uint32_t)0x04000000) /*!< TPM2 External Clock Pin Select */
|
|
#define SIM_SOPT4_TPM1CLKSEL ((uint32_t)0x02000000) /*!< TPM1 External Clock Pin Select */
|
|
#define SIM_SOPT4_TPM0CLKSEL ((uint32_t)0x01000000) /*!< TPM0 External Clock Pin Select */
|
|
#define SIM_SOPT4_TPM2CH0SRC ((uint32_t)0x00100000) /*!< TPM2 channel 0 input capture source select */
|
|
#define SIM_SOPT4_TPM1CH0SRC_SHIFT 18 /*!< TPM1 channel 0 input capture source select (shift) */
|
|
#define SIM_SOPT4_TPM1CH0SRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT4_TPM1CH0SRC_SHIFT)) /*!< TPM1 channel 0 input capture source select (mask) */
|
|
#define SIM_SOPT4_TPM1CH0SRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT4_TPM1CH0SRC_SHIFT) & SIM_SOPT4_TPM1CH0SRC_MASK)) /*!< TPM1 channel 0 input capture source select */
|
|
|
|
/******* Bits definition for SIM_SOPT5 register ************/
|
|
#define SIM_SOPT5_UART2ODE ((uint32_t)0x00040000) /*!< UART2 Open Drain Enable */
|
|
#define SIM_SOPT5_LPUART1ODE ((uint32_t)0x00020000) /*!< LPUART1 Open Drain Enable */
|
|
#define SIM_SOPT5_LPUART0ODE ((uint32_t)0x00010000) /*!< LPUART0 Open Drain Enable */
|
|
#define SIM_SOPT5_LPUART1RXSRC ((uint32_t)0x00000040) /*!< LPUART1 receive data source select */
|
|
#define SIM_SOPT5_LPUART1TXSRC_SHIFT 4 /*!< LPUART1 transmit data source select (shift) */
|
|
#define SIM_SOPT5_LPUART1TXSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT5_LPUART1TXSRC_SHIFT)) /*!< LPUART1 transmit data source select (mask) */
|
|
#define SIM_SOPT5_LPUART1TXSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT5_LPUART1TXSRC_SHIFT) & SIM_SOPT5_LPUART1TXSRC_MASK)) /*!< LPUART1 transmit data source select */
|
|
#define SIM_SOPT5_LPUART0RXSRC ((uint32_t)0x00000040) /*!< LPUART0 receive data source select */
|
|
#define SIM_SOPT5_LPUART0TXSRC_SHIFT 0 /*!< LPUART0 transmit data source select (shift) */
|
|
#define SIM_SOPT5_LPUART0TXSRC_MASK ((uint32_t)((uint32_t)0x03 << SIM_SOPT5_LPUART0TXSRC_SHIFT)) /*!< LPUART0 transmit data source select (mask) */
|
|
#define SIM_SOPT5_LPUART0TXSRC(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT5_LPUART0TXSRC_SHIFT) & SIM_SOPT5_LPUART0TXSRC_MASK)) /*!< LPUART0 transmit data source select */
|
|
|
|
/******* Bits definition for SIM_SOPT7 register ************/
|
|
#define SIM_SOPT7_ADC0ALTTRGEN ((uint32_t)0x00000080) /*!< ADC0 Alternate Trigger Enable */
|
|
#define SIM_SOPT7_ADC0PRETRGSEL ((uint32_t)0x00000010) /*!< ADC0 Pretrigger Select */
|
|
#define SIM_SOPT7_ADC0TRGSEL_SHIFT 0 /*!< ADC0 Trigger Select (shift) */
|
|
#define SIM_SOPT7_ADC0TRGSEL_MASK ((uint32_t)((uint32_t)0x0F << SIM_SOPT7_ADC0TRGSEL_SHIFT)) /*!< ADC0 Trigger Select (mask) */
|
|
#define SIM_SOPT7_ADC0TRGSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_SOPT7_ADC0TRGSEL_SHIFT) & SIM_SOPT7_ADC0TRGSEL_MASK)) /*!< ADC0 Trigger Select */
|
|
|
|
/******** Bits definition for SIM_SDID register ************/
|
|
#define SIM_SDID_FAMID_SHIFT 28 /*!< Kinetis family ID (shift) */
|
|
#define SIM_SDID_FAMID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_FAMID_SHIFT)) /*!< Kinetis family ID (mask) */
|
|
#define SIM_SDID_SUBFAMID_SHIFT 24 /*!< Kinetis Sub-Family ID (shift) */
|
|
#define SIM_SDID_SUBFAMID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_SUBFAMID_SHIFT)) /*!< Kinetis Sub-Family ID (mask) */
|
|
#define SIM_SDID_SERIESID_SHIFT 20 /*!< Kinetis Series ID (shift) */
|
|
#define SIM_SDID_SERIESID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_SERIESID_SHIFT)) /*!< Kinetis Series ID (mask) */
|
|
#define SIM_SDID_SRAMSIZE_SHIFT 16 /*!< System SRAM Size (shift) */
|
|
#define SIM_SDID_SRAMSIZE_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_SRAMSIZE_SHIFT)) /*!< System SRAM Size (mask) */
|
|
#define SIM_SDID_REVID_SHIFT 12 /*!< Device revision number (shift) */
|
|
#define SIM_SDID_REVID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_REVID_SHIFT)) /*!< Device revision number (mask) */
|
|
#define SIM_SDID_PINID_SHIFT 0 /*!< Pincount identification (shift) */
|
|
#define SIM_SDID_PINID_MASK ((uint32_t)((uint32_t)0x0F << SIM_SDID_PINID_SHIFT)) /*!< Pincount identification (mask) */
|
|
|
|
/******* Bits definition for SIM_SCGC4 register ************/
|
|
#define SIM_SCGC4_SPI1 ((uint32_t)0x00800000) /*!< SPI1 Clock Gate Control */
|
|
#define SIM_SCGC4_SPI0 ((uint32_t)0x00400000) /*!< SPI0 Clock Gate Control */
|
|
#define SIM_SCGC4_VREF ((uint32_t)0x00100000) /*!< VREF Clock Gate Control */
|
|
#define SIM_SCGC4_CMP0 ((uint32_t)0x00080000) /*!< Comparator Clock Gate Control */
|
|
#define SIM_SCGC4_USBFS ((uint32_t)0x00040000) /*!< USB Clock Gate Control */
|
|
#define SIM_SCGC4_UART2 ((uint32_t)0x00001000) /*!< UART2 Clock Gate Control */
|
|
#define SIM_SCGC4_I2C1 ((uint32_t)0x00000080) /*!< I2C1 Clock Gate Control */
|
|
#define SIM_SCGC4_I2C0 ((uint32_t)0x00000040) /*!< I2C0 Clock Gate Control */
|
|
|
|
/******* Bits definition for SIM_SCGC5 register ************/
|
|
#define SIM_SCGC5_FLEXIO ((uint32_t)0x80000000) /*!< FlexIO Module */
|
|
#define SIM_SCGC5_LPUART1 ((uint32_t)0x00200000) /*!< LPUART1 Clock Gate Control */
|
|
#define SIM_SCGC5_LPUART0 ((uint32_t)0x00100000) /*!< LPUART0 Clock Gate Control */
|
|
#define SIM_SCGC5_PORTE ((uint32_t)0x00002000) /*!< Port E Clock Gate Control */
|
|
#define SIM_SCGC5_PORTD ((uint32_t)0x00001000) /*!< Port D Clock Gate Control */
|
|
#define SIM_SCGC5_PORTC ((uint32_t)0x00000800) /*!< Port C Clock Gate Control */
|
|
#define SIM_SCGC5_PORTB ((uint32_t)0x00000400) /*!< Port B Clock Gate Control */
|
|
#define SIM_SCGC5_PORTA ((uint32_t)0x00000200) /*!< Port A Clock Gate Control */
|
|
#define SIM_SCGC5_LPTMR ((uint32_t)0x00000001) /*!< Low Power Timer Access Control */
|
|
|
|
/******* Bits definition for SIM_SCGC6 register ************/
|
|
#define SIM_SCGC6_DAC0 ((uint32_t)0x80000000) /*!< DAC0 Clock Gate Control */
|
|
#define SIM_SCGC6_RTC ((uint32_t)0x20000000) /*!< RTC Access Control */
|
|
#define SIM_SCGC6_ADC0 ((uint32_t)0x08000000) /*!< ADC0 Clock Gate Control */
|
|
#define SIM_SCGC6_TPM2 ((uint32_t)0x04000000) /*!< TPM2 Clock Gate Control */
|
|
#define SIM_SCGC6_TPM1 ((uint32_t)0x02000000) /*!< TPM1 Clock Gate Control */
|
|
#define SIM_SCGC6_TPM0 ((uint32_t)0x01000000) /*!< TPM0 Clock Gate Control */
|
|
#define SIM_SCGC6_PIT ((uint32_t)0x00800000) /*!< PIT Clock Gate Control */
|
|
#define SIM_SCGC6_I2S ((uint32_t)0x00008000) /*!< I2S0 Clock Gate Control */
|
|
#define SIM_SCGC6_DMAMUX ((uint32_t)0x00000002) /*!< DMA Mux Clock Gate Control */
|
|
#define SIM_SCGC6_FTF ((uint32_t)0x00000001) /*!< Flash Memory Clock Gate Control */
|
|
|
|
/******* Bits definition for SIM_SCGC7 register ************/
|
|
#define SIM_SCGC7_DMA ((uint32_t)0x00000100) /*!< DMA Clock Gate Control */
|
|
|
|
/****** Bits definition for SIM_CLKDIV1 register ***********/
|
|
#define SIM_CLKDIV1_OUTDIV1_SHIFT 28 /*!< Clock 1 output divider value (shift) */
|
|
#define SIM_CLKDIV1_OUTDIV1_MASK ((uint32_t)((uint32_t)0x0F << SIM_CLKDIV1_OUTDIV1_SHIFT)) /*!< Clock 1 output divider value (mask) */
|
|
#define SIM_CLKDIV1_OUTDIV1(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV1_SHIFT) & SIM_CLKDIV1_OUTDIV1_MASK)) /*!< Clock 1 output divider value */
|
|
#define SIM_CLKDIV1_OUTDIV4_SHIFT 16 /*!< Clock 4 output divider value (shift) */
|
|
#define SIM_CLKDIV1_OUTDIV4_MASK ((uint32_t)((uint32_t)0x07 << SIM_CLKDIV1_OUTDIV4_SHIFT)) /*!< Clock 4 output divider value (mask) */
|
|
#define SIM_CLKDIV1_OUTDIV4(x) ((uint32_t)(((uint32_t)(x) << SIM_CLKDIV1_OUTDIV4_SHIFT) & SIM_CLKDIV1_OUTDIV4_MASK)) /*!< Clock 4 output divider value */
|
|
|
|
/******* Bits definition for SIM_FCFG1 register ************/
|
|
#define SIM_FCFG1_PFSIZE_SHIFT 24 /*!< Program Flash Size (shift) */
|
|
#define SIM_FCFG1_PFSIZE_MASK ((uint32_t)((uint32_t)0x0F << SIM_FCFG1_PFSIZE_SHIFT)) /*!< Program Flash Size (mask) */
|
|
#define SIM_FCFG1_FLASHDOZE ((uint32_t)0x00000002) /*!< Flash Doze */
|
|
#define SIM_FCFG1_FLASHDIS ((uint32_t)0x00000001) /*!< Flash Disable */
|
|
|
|
/******* Bits definition for SIM_FCFG2 register ************/
|
|
#define SIM_FCFG2_MAXADDR0_SHIFT 24 /*!< Max address lock (shift) */
|
|
#define SIM_FCFG2_MAXADDR0_MASK ((uint32_t)((uint32_t)0x7F << SIM_FCFG2_MAXADDR0_SHIFT)) /*!< Max address lock (mask) */
|
|
#define SIM_FCFG2_MAXADDR1_SHIFT 16 /*!< Max address lock (block 1) (shift) */
|
|
#define SIM_FCFG2_MAXADDR1_MASK ((uint32_t)((uint32_t)0x7F << SIM_FCFG2_MAXADDR1_SHIFT)) /*!< Max address lock (block 1) (mask) */
|
|
|
|
/******* Bits definition for SIM_UIDMH register ************/
|
|
#define SIM_UIDMH_UID_MASK ((uint32_t)0x0000FFFF) /*!< Unique Identification */
|
|
|
|
/******* Bits definition for SIM_UIDML register ************/
|
|
#define SIM_UIDML_UID_MASK ((uint32_t)0xFFFFFFFF) /*!< Unique Identification */
|
|
|
|
/******* Bits definition for SIM_UIDL register *************/
|
|
#define SIM_UIDL_UID_MASK ((uint32_t)0xFFFFFFFF) /*!< Unique Identification */
|
|
|
|
/******* Bits definition for SIM_COPC register *************/
|
|
#define SIM_COPC_COPCLKSEL_SHIFT 6 /*!< COP Clock Select (shift) */
|
|
#define SIM_COPC_COPCLKSEL_MASK ((uint32_t)((uint32_t)0x03 << SIM_COPC_COPCLKSEL_SHIFT)) /*!< COP Clock Select (mask) */
|
|
#define SIM_COPC_COPCLKSEL(x) ((uint32_t)(((uint32_t)(x) << SIM_COPC_COPCLKSEL_SHIFT) & SIM_COPC_COPCLKSEL_MASK)) /*!< COP Clock Select */
|
|
#define SIM_COPC_COPDBGEN ((uint32_t)0x00000020) /*!< COP Debug Enable */
|
|
#define SIM_COPC_COPSTPEN ((uint32_t)0x00000010) /*!< COP Stop Enable */
|
|
#define SIM_COPC_COPT_SHIFT 2 /*!< COP Watchdog Timeout (shift) */
|
|
#define SIM_COPC_COPT_MASK ((uint32_t)((uint32_t)0x03 << SIM_COPC_COPT_SHIFT)) /*!< COP Watchdog Timeout (mask) */
|
|
#define SIM_COPC_COPT(x) ((uint32_t)(((uint32_t)(x) << SIM_COPC_COPT_SHIFT) & SIM_COPC_COPT_MASK)) /*!< COP Watchdog Timeout */
|
|
#define SIM_COPC_COPCLKS ((uint32_t)0x00000002) /*!< COP Clock Select */
|
|
#define SIM_COPC_COPW ((uint32_t)0x00000001) /*!< COP windowed mode */
|
|
|
|
/******* Bits definition for SIM_SRVCOP register ***********/
|
|
#define SIM_SRVCOP_SRVCOP_SHIFT 0 /*!< Sevice COP Register (shift) */
|
|
#define SIM_SRVCOP_SRVCOP_MASK ((uint32_t)((uint32_t)0xFF << SIM_SRVCOP_SRVCOP_SHIFT)) /*!< Sevice COP Register (mask) */
|
|
#define SIM_SRVCOP_SRVCOP(x) ((uint32_t)(((uint32_t)(x) << SIM_SRVCOP_SRVCOP_SHIFT) & SIM_SRVCOP_SRVCOP_MASK)) /*!< Sevice COP Register */
|
|
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Low-Leakage Wakeup Unit (LLWU) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Port Control and interrupts (PORT) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Oscillator (OSC) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Direct Memory Access (DMA) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Direct Memory Access Multiplexer (DMAMUX) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Periodic Interrupt Timer (PIT) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Analog-to-Digital Converter (ADC) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Low-Power Timer (LPTMR) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Multipurpose Clock Generator Lite (MCG_Lite) */
|
|
/* */
|
|
/****************************************************************/
|
|
/*********** Bits definition for MCG_C1 register **************/
|
|
#define MCG_C1_CLKS_SHIFT 6 /*!< Clock source select (shift) */
|
|
#define MCG_C1_CLKS_MASK ((uint8_t)((uint8_t)0x03 << MCG_C1_CLKS_SHIFT)) /*!< Clock source select (mask) */
|
|
#define MCG_C1_CLKS(x) ((uint8_t)(((uint8_t)(x) << MCG_C1_CLKS_SHIFT) & MCG_C1_CLKS_MASK)) /*!< Clock source select */
|
|
#define MCG_C1_CLKS_HIRC MCG_C1_CLKS(0) /*!< HIRC */
|
|
#define MCG_C1_CLKS_LIRC MCG_C1_CLKS(1) /*!< LIRC (either LIRC2M or LIRC8M) */
|
|
#define MCG_C1_CLKS_EXT MCG_C1_CLKS(2) /*!< EXT (external ref) */
|
|
#define MCG_C1_IRCLKEN ((uint8_t)((uint8_t)1 << 1)) /*!< Internal Reference Clock Enable */
|
|
#define MCG_C1_IREFSTEN ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Stop Enable */
|
|
|
|
/*********** Bits definition for MCG_C2 register **************/
|
|
#define MCG_C2_RANGE0_SHIFT 4 /*!< Frequency Range Select (shift) */
|
|
#define MCG_C2_RANGE0_MASK ((uint8_t)((uint8_t)0x03 << MCG_C2_RANGE0_SHIFT)) /*!< Frequency Range Select (mask) */
|
|
#define MCG_C2_RANGE0(x) ((uint8_t)(((uint8_t)(x) << MCG_C2_RANGE0_SHIFT) & MCG_C2_RANGE0_MASK)) /*!< Frequency Range Select */
|
|
#define MCG_C2_HGO0 ((uint8_t)((uint8_t)1 << 3)) /*!< High Gain Oscillator Select (0=low power; 1=high gain) */
|
|
#define MCG_C2_EREFS0 ((uint8_t)((uint8_t)1 << 2)) /*!< External Reference Select (0=clock; 1=oscillator) */
|
|
#define MCG_C2_IRCS ((uint8_t)((uint8_t)1 << 0)) /*!< Internal Reference Clock Select (0=slow; 1=fast) */
|
|
|
|
/************ Bits definition for MCG_S register **************/
|
|
#define MCG_S_CLKST_SHIFT 2 /*!< Clock Mode Status (shift) */
|
|
#define MCG_S_CLKST_MASK ((uint8_t)((uint8_t)0x03 << MCG_S_CLKST_SHIFT)) /*!< Clock Mode Status (mask) */
|
|
#define MCG_S_CLKST(x) ((uint8_t)(((uint8_t)(x) << MCG_S_CLKST_SHIFT) & MCG_S_CLKST_MASK)) /*!< Clock Mode Status */
|
|
#define MCG_S_CLKST_HIRC MCG_S_CLKST(0)
|
|
#define MCG_S_CLKST_LIRC MCG_S_CLKST(1)
|
|
#define MCG_S_CLKST_EXT MCG_S_CLKST(2)
|
|
#define MCG_S_OSCINIT0 ((uint8_t)((uint8_t)1 << 1)) /*!< OSC Initialization */
|
|
|
|
/************ Bits definition for MCG_SC register **************/
|
|
#define MCG_SC_FCRDIV_SHIFT 1 /*!< Fast Clock Internal Reference Divider (shift) */
|
|
#define MCG_SC_FCRDIV_MASK ((uint8_t)((uint8_t)0x07 << MCG_SC_FCRDIV_SHIFT)) /*!< Fast Clock Internal Reference Divider (mask) */
|
|
#define MCG_SC_FCRDIV(x) ((uint8_t)(((uint8_t)(x) << MCG_SC_FCRDIV_SHIFT) & MCG_SC_FCRDIV_MASK)) /*!< Fast Clock Internal Reference Divider */
|
|
#define MCG_SC_FCRDIV_DIV1 MCG_SC_FCRDIV(0) /*!< Divide Factor is 1 */
|
|
#define MCG_SC_FCRDIV_DIV2 MCG_SC_FCRDIV(1) /*!< Divide Factor is 2 */
|
|
#define MCG_SC_FCRDIV_DIV4 MCG_SC_FCRDIV(2) /*!< Divide Factor is 4 */
|
|
#define MCG_SC_FCRDIV_DIV8 MCG_SC_FCRDIV(3) /*!< Divide Factor is 8 */
|
|
#define MCG_SC_FCRDIV_DIV16 MCG_SC_FCRDIV(4) /*!< Divide Factor is 16 */
|
|
#define MCG_SC_FCRDIV_DIV32 MCG_SC_FCRDIV(5) /*!< Divide Factor is 32 */
|
|
#define MCG_SC_FCRDIV_DIV64 MCG_SC_FCRDIV(6) /*!< Divide Factor is 64 */
|
|
#define MCG_SC_FCRDIV_DIV128 MCG_SC_FCRDIV(7) /*!< Divide Factor is 128 */
|
|
|
|
/************ Bits definition for MCG_MC register *************/
|
|
#define MCG_MC_HIRCEN ((uint8_t)0x80) /*!< High-frequency IRC Enable */
|
|
#define MCG_MC_LIRC_DIV2_SHIFT 0 /*!< Second Low-frequency Internal Reference Clock Divider (shift) */
|
|
#define MCG_MC_LIRC_DIV2_MASK ((uint8_t)((uint8_t)0x07 << MCG_MC_LIRC_DIV2_SHIFT)) /*!< Second Low-frequency Internal Reference Clock Divider (mask) */
|
|
#define MCG_MC_LIRC_DIV2(x) ((uint8_t)(((uint8_t)(x) << MCG_MC_LIRC_DIV2_SHIFT) & MCG_MC_LIRC_DIV2_MASK)) /*!< Second Low-frequency Internal Reference Clock Divider */
|
|
#define MCG_MC_LIRC_DIV2_DIV1 MCG_MC_LIRC_DIV2(0) /*!< Divide Factor is 1 */
|
|
#define MCG_MC_LIRC_DIV2_DIV2 MCG_MC_LIRC_DIV2(1) /*!< Divide Factor is 2 */
|
|
#define MCG_MC_LIRC_DIV2_DIV4 MCG_MC_LIRC_DIV2(2) /*!< Divide Factor is 4 */
|
|
#define MCG_MC_LIRC_DIV2_DIV8 MCG_MC_LIRC_DIV2(3) /*!< Divide Factor is 8 */
|
|
#define MCG_MC_LIRC_DIV2_DIV16 MCG_MC_LIRC_DIV2(4) /*!< Divide Factor is 16 */
|
|
#define MCG_MC_LIRC_DIV2_DIV32 MCG_MC_LIRC_DIV2(5) /*!< Divide Factor is 32 */
|
|
#define MCG_MC_LIRC_DIV2_DIV64 MCG_MC_LIRC_DIV2(6) /*!< Divide Factor is 64 */
|
|
#define MCG_MC_LIRC_DIV2_DIV128 MCG_MC_LIRC_DIV2(7) /*!< Divide Factor is 128 */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Serial Peripheral Interface (SPI) */
|
|
/* */
|
|
/****************************************************************/
|
|
/*********** Bits definition for SPIx_S register **************/
|
|
#define SPIx_S_SPRF ((uint8_t)0x80) /*!< SPI Read Buffer Full Flag */
|
|
#define SPIx_S_SPMF ((uint8_t)0x40) /*!< SPI Match Flag */
|
|
#define SPIx_S_SPTEF ((uint8_t)0x20) /*!< SPI Transmit Buffer Empty Flag */
|
|
#define SPIx_S_MODF ((uint8_t)0x10) /*!< Master Mode Fault Flag */
|
|
#define SPIx_S_RNFULLF ((uint8_t)0x08) /*!< Receive FIFO nearly full flag */
|
|
#define SPIx_S_TNEAREF ((uint8_t)0x04) /*!< Transmit FIFO nearly empty flag */
|
|
#define SPIx_S_TXFULLF ((uint8_t)0x02) /*!< Transmit FIFO full flag */
|
|
#define SPIx_S_RFIFOEF ((uint8_t)0x01) /*!< SPI read FIFO empty flag */
|
|
|
|
/*********** Bits definition for SPIx_BR register *************/
|
|
#define SPIx_BR_SPPR_SHIFT 4 /*!< SPI Baud rate Prescaler Divisor */
|
|
#define SPIx_BR_SPPR_MASK ((uint8_t)((uint8_t)0x7 << SPIx_BR_SPPR_SHIFT))
|
|
#define SPIx_BR_SPPR(x) ((uint8_t)(((uint8_t)(x) << SPIx_BR_SPPR_SHIFT) & SPIx_BR_SPPR_MASK))
|
|
#define SPIx_BR_SPR_SHIFT 0 /*!< SPI Baud rate Divisor */
|
|
#define SPIx_BR_SPR_MASK ((uint8_t)((uint8_t)0x0F << SPIx_BR_SPR_SHIFT))
|
|
#define SPIx_BR_SPR(x) ((uint8_t)(((uint8_t)(x) << SPIx_BR_SPR_SHIFT) & SPIx_BR_SPR_MASK))
|
|
|
|
/*********** Bits definition for SPIx_C2 register *************/
|
|
#define SPIx_C2_SPMIE ((uint8_t)0x80) /*!< SPI Match Interrupt Enable */
|
|
#define SPIx_C2_SPIMODE ((uint8_t)0x40) /*!< SPI 8-bit or 16-bit mode */
|
|
#define SPIx_C2_TXDMAE ((uint8_t)0x20) /*!< Transmit DMA Enable */
|
|
#define SPIx_C2_MODFEN ((uint8_t)0x10) /*!< Master Mode-Fault Function Enable */
|
|
#define SPIx_C2_BIDIROE ((uint8_t)0x08) /*!< Bidirectional Mode Output Enable */
|
|
#define SPIx_C2_RXDMAE ((uint8_t)0x04) /*!< Receive DMA Enable */
|
|
#define SPIx_C2_SPISWAI ((uint8_t)0x02) /*!< SPI Stop in Wait Mode */
|
|
#define SPIx_C2_SPC0 ((uint8_t)0x01) /*!< SPI Pin Control 0 */
|
|
|
|
/*********** Bits definition for SPIx_C1 register *************/
|
|
#define SPIx_C1_SPIE ((uint8_t)0x80) /*!< SPI Interrupt Enable */
|
|
#define SPIx_C1_SPE ((uint8_t)0x40) /*!< SPI System Enable */
|
|
#define SPIx_C1_SPTIE ((uint8_t)0x20) /*!< SPI Transmit Interrupt Enable */
|
|
#define SPIx_C1_MSTR ((uint8_t)0x10) /*!< Master/Slave Mode Select */
|
|
#define SPIx_C1_CPOL ((uint8_t)0x08) /*!< Clock Polarity */
|
|
#define SPIx_C1_CPHA ((uint8_t)0x04) /*!< Clock Phase */
|
|
#define SPIx_C1_SSOE ((uint8_t)0x02) /*!< Slave Select Output Enable */
|
|
#define SPIx_C1_LSBFE ((uint8_t)0x01) /*!< LSB First */
|
|
|
|
/*********** Bits definition for SPIx_ML register *************/
|
|
#define SPIx_ML_DATA_SHIFT 0 /*!< SPI HW Compare value for Match - low byte */
|
|
#define SPIx_ML_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_ML_DATA_SHIFT))
|
|
#define SPIx_ML_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_ML_DATA_SHIFT) & SPIx_ML_DATA_MASK))
|
|
|
|
/*********** Bits definition for SPIx_MH register *************/
|
|
#define SPIx_MH_DATA_SHIFT 0 /*!< SPI HW Compare value for Match - high byte */
|
|
#define SPIx_MH_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_MH_DATA_SHIFT))
|
|
#define SPIx_MH_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_MH_DATA_SHIFT) & SPIx_MH_DATA_MASK))
|
|
|
|
/*********** Bits definition for SPIx_DL register *************/
|
|
#define SPIx_DL_DATA_SHIFT 0 /*!< Data - low byte */
|
|
#define SPIx_DL_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_DL_DATA_SHIFT))
|
|
#define SPIx_DL_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_DL_DATA_SHIFT) & SPIx_DL_DATA_MASK))
|
|
|
|
/*********** Bits definition for SPIx_DH register *************/
|
|
#define SPIx_DH_DATA_SHIFT 0 /*!< Data - high byte */
|
|
#define SPIx_DH_DATA_MASK ((uint8_t)((uint8_t)0xFF << SPIx_DH_DATA_SHIFT))
|
|
#define SPIx_DH_DATA(x) ((uint8_t)(((uint8_t)(x) << SPIx_DH_DATA_SHIFT) & SPIx_DH_DATA_MASK))
|
|
|
|
/*********** Bits definition for SPIx_CI register *************/
|
|
#define SPIx_CI_TXFERR ((uint8_t)0x80) /*!< Transmit FIFO error flag */
|
|
#define SPIx_CI_RXFERR ((uint8_t)0x40) /*!< Receive FIFO error flag */
|
|
#define SPIx_CI_TXFOF ((uint8_t)0x20) /*!< Transmit FIFO overflow flag */
|
|
#define SPIx_CI_RXFOF ((uint8_t)0x10) /*!< Receive FIFO overflow flag */
|
|
#define SPIx_CI_TNEAREFCI ((uint8_t)0x08) /*!< Transmit FIFO nearly empty flag clear interrupt */
|
|
#define SPIx_CI_RNFULLFCI ((uint8_t)0x04) /*!< Receive FIFO nearly full flag clear interrupt */
|
|
#define SPIx_CI_SPTEFCI ((uint8_t)0x02) /*!< Transmit FIFO empty flag clear interrupt */
|
|
#define SPIx_CI_SPRFCI ((uint8_t)0x01) /*!< Receive FIFO full flag clear interrupt */
|
|
|
|
/*********** Bits definition for SPIx_C3 register *************/
|
|
#define SPIx_C3_TNEAREF_MARK ((uint8_t)0x20) /*!< Transmit FIFO nearly empty watermark */
|
|
#define SPIx_C3_RNFULLF_MARK ((uint8_t)0x10) /*!< Receive FIFO nearly full watermark */
|
|
#define SPIx_C3_INTCLR ((uint8_t)0x08) /*!< Interrupt clearing mechanism select */
|
|
#define SPIx_C3_TNEARIEN ((uint8_t)0x04) /*!< Transmit FIFO nearly empty interrupt enable */
|
|
#define SPIx_C3_RNFULLIEN ((uint8_t)0x02) /*!< Receive FIFO nearly full interrupt enable */
|
|
#define SPIx_C3_FIFOMODE ((uint8_t)0x01) /*!< FIFO mode enable */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Inter-Integrated Circuit (I2C): Device dependent part */
|
|
/* */
|
|
/****************************************************************/
|
|
/*********** Bits definition for I2Cx_FLT register ************/
|
|
#define I2Cx_FLT_SHEN ((uint8_t)0x80) /*!< Stop Hold Enable */
|
|
#define I2Cx_FLT_STOPF ((uint8_t)0x40) /*!< I2C Bus Stop Detect Flag */
|
|
#define I2Cx_FLT_SSIE ((uint8_t)0x20) /*!< I2C Bus Stop or Start Interrupt Enable */
|
|
#define I2Cx_FLT_STARTF ((uint8_t)0x10) /*!< I2C Bus Start Detect Flag */
|
|
#define I2Cx_FLT_FLT_SHIFT 0 /*!< I2C Programmable Filter Factor */
|
|
#define I2Cx_FLT_FLT_MASK ((uint8_t)((uint8_t)0x0F << I2Cx_FLT_FLT_SHIFT))
|
|
#define I2Cx_FLT_FLT(x) ((uint8_t)(((uint8_t)(x) << I2Cx_FLT_FLT_SHIFT) & I2Cx_FLT_FLT_MASK))
|
|
|
|
/*********** Bits definition for I2Cx_S2 register *************/
|
|
#define I2Cx_S2_ERROR ((uint8_t)0x02) /*!< Error flag */
|
|
#define I2Cx_S2_EMPTY ((uint8_t)0x01) /*!< Empty flag */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Universal Asynchronous Receiver/Transmitter (UART) */
|
|
/* */
|
|
/****************************************************************/
|
|
/********* Bits definition for UARTx_BDH register *************/
|
|
#define UARTx_BDH_RXEDGIE ((uint8_t)0x40) /*!< RX Input Active Edge Interrupt Enable */
|
|
#define UARTx_BDH_SBR_SHIFT 0 /*!< Baud Rate Modulo Divisor */
|
|
#define UARTx_BDH_SBR_MASK ((uint8_t)((uint8_t)0x1F << UARTx_BDH_SBR_SHIFT))
|
|
#define UARTx_BDH_SBR(x) ((uint8_t)(((uint8_t)(x) << UARTx_BDH_SBR_SHIFT) & UARTx_BDH_SBR_MASK))
|
|
|
|
/********* Bits definition for UARTx_BDL register *************/
|
|
#define UARTx_BDL_SBR_SHIFT 0 /*!< Baud Rate Modulo Divisor */
|
|
#define UARTx_BDL_SBR_MASK ((uint8_t)((uint8_t)0xFF << UARTx_BDL_SBR_SHIFT))
|
|
#define UARTx_BDL_SBR(x) ((uint8_t)(((uint8_t)(x) << UARTx_BDL_SBR_SHIFT) & UARTx_BDL_SBR_MASK))
|
|
|
|
/********* Bits definition for UARTx_C1 register **************/
|
|
#define UARTx_C1_LOOPS ((uint8_t)0x80) /*!< Loop Mode Select */
|
|
#define UARTx_C1_RSRC ((uint8_t)0x20) /*!< Receiver Source Select */
|
|
#define UARTx_C1_M ((uint8_t)0x10) /*!< 9-Bit or 8-Bit Mode Select */
|
|
#define UARTx_C1_WAKE ((uint8_t)0x08) /*!< Receiver Wakeup Method Select */
|
|
#define UARTx_C1_ILT ((uint8_t)0x04) /*!< Idle Line Type Select */
|
|
#define UARTx_C1_PE ((uint8_t)0x02) /*!< Parity Enable */
|
|
#define UARTx_C1_PT ((uint8_t)0x01) /*!< Parity Type */
|
|
|
|
/********* Bits definition for UARTx_C2 register **************/
|
|
#define UARTx_C2_TIE ((uint8_t)0x80) /*!< Transmit Interrupt Enable for TDRE */
|
|
#define UARTx_C2_TCIE ((uint8_t)0x40) /*!< Transmission Complete Interrupt Enable for TC */
|
|
#define UARTx_C2_RIE ((uint8_t)0x20) /*!< Receiver Interrupt Enable for RDRF */
|
|
#define UARTx_C2_ILIE ((uint8_t)0x10) /*!< Idle Line Interrupt Enable for IDLE */
|
|
#define UARTx_C2_TE ((uint8_t)0x08) /*!< Transmitter Enable */
|
|
#define UARTx_C2_RE ((uint8_t)0x04) /*!< Receiver Enable */
|
|
#define UARTx_C2_RWU ((uint8_t)0x02) /*!< Receiver Wakeup Control */
|
|
#define UARTx_C2_SBK ((uint8_t)0x01) /*!< Send Break */
|
|
|
|
/********* Bits definition for UARTx_S1 register **************/
|
|
#define UARTx_S1_TDRE ((uint8_t)0x80) /*!< Transmit Data Register Empty Flag */
|
|
#define UARTx_S1_TC ((uint8_t)0x40) /*!< Transmission Complete Flag */
|
|
#define UARTx_S1_RDRF ((uint8_t)0x20) /*!< Receiver Data Register Full Flag */
|
|
#define UARTx_S1_IDLE ((uint8_t)0x10) /*!< Idle Line Flag */
|
|
#define UARTx_S1_OR ((uint8_t)0x08) /*!< Receiver Overrun Flag */
|
|
#define UARTx_S1_NF ((uint8_t)0x04) /*!< Noise Flag */
|
|
#define UARTx_S1_FE ((uint8_t)0x02) /*!< Framing Error Flag */
|
|
#define UARTx_S1_PF ((uint8_t)0x01) /*!< Parity Error Flag */
|
|
|
|
/********* Bits definition for UARTx_S2 register **************/
|
|
#define UARTx_S2_RXEDGIF ((uint8_t)0x40) /*!< UART_RX Pin Active Edge Interrupt Flag */
|
|
#define UARTx_S2_MSBF ((uint8_t)0x20) /*!< MSB First */
|
|
#define UARTx_S2_RXINV ((uint8_t)0x10) /*!< Receive Data Inversion */
|
|
#define UARTx_S2_RWUID ((uint8_t)0x08) /*!< Receive Wake Up Idle Detect */
|
|
#define UARTx_S2_BRK13 ((uint8_t)0x04) /*!< Break Character Generation Length */
|
|
#define UARTx_S2_RAF ((uint8_t)0x01) /*!< Receiver Active Flag */
|
|
|
|
/********* Bits definition for UARTx_C3 register **************/
|
|
#define UARTx_C3_R8 ((uint8_t)0x80) /*!< Ninth Data Bit for Receiver */
|
|
#define UARTx_C3_T8 ((uint8_t)0x40) /*!< Ninth Data Bit for Transmitter */
|
|
#define UARTx_C3_TXDIR ((uint8_t)0x20) /*!< UART_TX Pin Direction in Single-Wire Mode */
|
|
#define UARTx_C3_TXINV ((uint8_t)0x10) /*!< Transmit Data Inversion */
|
|
#define UARTx_C3_ORIE ((uint8_t)0x08) /*!< Overrun Interrupt Enable */
|
|
#define UARTx_C3_NEIE ((uint8_t)0x04) /*!< Noise Error Interrupt Enable */
|
|
#define UARTx_C3_FEIE ((uint8_t)0x02) /*!< Framing Error Interrupt Enable */
|
|
#define UARTx_C3_PEIE ((uint8_t)0x01) /*!< Parity Error Interrupt Enable */
|
|
|
|
/********* Bits definition for UARTx_D register ***************/
|
|
#define UARTx_D_R7T7 ((uint8_t)0x80) /*!< Read receive data buffer 7 or write transmit data buffer 7 */
|
|
#define UARTx_D_R6T6 ((uint8_t)0x40) /*!< Read receive data buffer 6 or write transmit data buffer 6 */
|
|
#define UARTx_D_R5T5 ((uint8_t)0x20) /*!< Read receive data buffer 5 or write transmit data buffer 5 */
|
|
#define UARTx_D_R4T4 ((uint8_t)0x10) /*!< Read receive data buffer 4 or write transmit data buffer 4 */
|
|
#define UARTx_D_R3T3 ((uint8_t)0x08) /*!< Read receive data buffer 3 or write transmit data buffer 3 */
|
|
#define UARTx_D_R2T2 ((uint8_t)0x04) /*!< Read receive data buffer 2 or write transmit data buffer 2 */
|
|
#define UARTx_D_R1T1 ((uint8_t)0x02) /*!< Read receive data buffer 1 or write transmit data buffer 1 */
|
|
#define UARTx_D_R0T0 ((uint8_t)0x01) /*!< Read receive data buffer 0 or write transmit data buffer 0 */
|
|
#define UARTx_D_RT_SHIFT 0
|
|
#define UARTx_D_RT_MASK ((uint8_t)0xFF)
|
|
|
|
/********* Bits definition for UARTx_MA1 register *************/
|
|
#define UARTx_MA1_MA_SHIFT 0 /*!< Match Address */
|
|
#define UARTx_MA1_MA_MASK ((uint8_t)((uint8_t)0xFF << UARTx_MA1_MA_SHIFT))
|
|
#define UARTx_MA1_MA(x) ((uint8_t)(((uint8_t)(x) << UARTx_MA1_MA_SHIFT) & UARTx_MA1_MA_MASK))
|
|
|
|
/********* Bits definition for UARTx_MA2 register *************/
|
|
#define UARTx_MA2_MA_SHIFT 0 /*!< Match Address */
|
|
#define UARTx_MA2_MA_MASK ((uint8_t)((uint8_t)0xFF << UARTx_MA2_MA_SHIFT))
|
|
#define UARTx_MA2_MA(x) ((uint8_t)(((uint8_t)(x) << UARTx_MA2_MA_SHIFT) & UARTx_MA2_MA_MASK))
|
|
|
|
/********* Bits definition for UARTx_C4 register **************/
|
|
#define UARTx_C4_MAEN1 ((uint8_t)0x80) /*!< Match Address Mode Enable 1 */
|
|
#define UARTx_C4_MAEN2 ((uint8_t)0x40) /*!< Match Address Mode Enable 2 */
|
|
#define UARTx_C4_M10 ((uint8_t)0x20) /*!< 10-bit Mode Select */
|
|
#define UARTx_C4_OSR_SHIFT 0 /*!< Over Sampling Ratio */
|
|
#define UARTx_C4_OSR_MASK ((uint8_t)((uint8_t)0x1F << UARTx_C4_OSR_SHIFT))
|
|
#define UARTx_C4_OSR(x) ((uint8_t)(((uint8_t)(x) << UARTx_C4_OSR_SHIFT) & UARTx_C4_OSR_MASK))
|
|
|
|
/********* Bits definition for UARTx_C5 register **************/
|
|
#define UARTx_C5_TDMAE ((uint8_t)0x80) /*!< Transmitter DMA Enable */
|
|
#define UARTx_C5_RDMAE ((uint8_t)0x20) /*!< Receiver Full DMA Enable */
|
|
#define UARTx_C5_BOTHEDGE ((uint8_t)0x02) /*!< Both Edge Sampling */
|
|
#define UARTx_C5_RESYNCDIS ((uint8_t)0x01) /*!< Resynchronization Disable */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/*Low Power Universal asynchronous receiver/transmitter (LPUART)*/
|
|
/* */
|
|
/****************************************************************/
|
|
/********* Bits definition for LPUARTx_BAUD register **********/
|
|
#define LPUARTx_BAUD_MAEN1 ((uint32_t)0x80000000) /*!< Match Address Mode Enable 1 */
|
|
#define LPUARTx_BAUD_MAEN2 ((uint32_t)0x40000000) /*!< Match Address Mode Enable 2 */
|
|
#define LPUARTx_BAUD_M10 ((uint32_t)0x20000000) /*!< 10-bit Mode select */
|
|
#define LPUARTx_BAUD_OSR_SHIFT 24 /*!< Over Sampling Ratio (shift) */
|
|
#define LPUARTx_BAUD_OSR_MASK ((uint32_t)((uint32_t)0x1F << LPUARTx_BAUD_OSR_SHIFT)) /*!< Over Sampling Ratio (mask) */
|
|
#define LPUARTx_BAUD_OSR(x) ((uint32_t)(((uint32_t)(x) << LPUARTx_BAUD_OSR_SHIFT) & LPUARTx_BAUD_OSR_MASK)) /*!< Over Sampling Ratio */
|
|
#define LPUARTx_BAUD_TDMAE ((uint32_t)0x00800000) /*!< Transmitter DMA Enable */
|
|
#define LPUARTx_BAUD_RDMAE ((uint32_t)0x00200000) /*!< Receiver Full DMA Enable */
|
|
#define LPUARTx_BAUD_MATCFG_SHIFT 18 /*!< Match Configuration (shift) */
|
|
#define LPUARTx_BAUD_MATCFG_MASK ((uint32_t)((uint32_t)0x03 << LPUARTx_BAUD_MATCFG_SHIFT)) /*!< Match Configuration (mask) */
|
|
#define LPUARTx_BAUD_MATCFG(x) ((uint32_t)(((uint32_t)(x) << LPUARTx_BAUD_MATCFG_SHIFT) & LPUARTx_BAUD_MATCFG_MASK)) /*!< Match Configuration */
|
|
#define LPUARTx_BAUD_BOTHEDGE ((uint32_t)0x00020000) /*!< Both Edge Sampling */
|
|
#define LPUARTx_BAUD_RESYNCDIS ((uint32_t)0x00010000) /*!< Resynchronization Disable */
|
|
#define LPUARTx_BAUD_LBKDIE ((uint32_t)0x00008000) /*!< LIN Break Detect Interrupt Enable */
|
|
#define LPUARTx_BAUD_RXEDGIE ((uint32_t)0x00004000) /*!< RX Input Active Edge Interrupt Enable */
|
|
#define LPUARTx_BAUD_SBNS ((uint32_t)0x00002000) /*!< Stop Bit Number Select */
|
|
#define LPUARTx_BAUD_SBR_SHIFT 0 /*!< Baud Rate Modulo Divisor (shift) */
|
|
#define LPUARTx_BAUD_SBR_MASK ((uint32_t)((uint32_t)0x1FFF << LPUARTx_BAUD_SBR_SHIFT)) /*!< Baud Rate Modulo Divisor (mask) */
|
|
#define LPUARTx_BAUD_SBR(x) ((uint32_t)(((uint32_t)(x) << LPUARTx_BAUD_SBR_SHIFT) & LPUARTx_BAUD_SBR_MASK)) /*!< Baud Rate Modulo Divisor */
|
|
|
|
/********* Bits definition for LPUARTx_STAT register **********/
|
|
#define LPUARTx_STAT_LBKDIF ((uint32_t)0x80000000) /*!< LIN Break Detect Interrupt Flag */
|
|
#define LPUARTx_STAT_RXEDGIF ((uint32_t)0x40000000) /*!< LPUART_RX Pin Active Edge Interrupt Flag */
|
|
#define LPUARTx_STAT_MSBF ((uint32_t)0x20000000) /*!< MSB First */
|
|
#define LPUARTx_STAT_RXINV ((uint32_t)0x10000000) /*!< Receive Data Inversion */
|
|
#define LPUARTx_STAT_RWUID ((uint32_t)0x08000000) /*!< Receive Wake Up Idle Detect */
|
|
#define LPUARTx_STAT_BRK13 ((uint32_t)0x04000000) /*!< Break Character Generation Length */
|
|
#define LPUARTx_STAT_LBKDE ((uint32_t)0x02000000) /*!< LIN Break Detection Enable */
|
|
#define LPUARTx_STAT_RAF ((uint32_t)0x01000000) /*!< Receiver Active Flag */
|
|
#define LPUARTx_STAT_TDRE ((uint32_t)0x00800000) /*!< Transmit Data Register Empty Flag */
|
|
#define LPUARTx_STAT_TC ((uint32_t)0x00400000) /*!< Transmission Complete Flag */
|
|
#define LPUARTx_STAT_RDRF ((uint32_t)0x00200000) /*!< Receive Data Register Full Flag */
|
|
#define LPUARTx_STAT_IDLE ((uint32_t)0x00100000) /*!< Idle Line Flag */
|
|
#define LPUARTx_STAT_OR ((uint32_t)0x00080000) /*!< Receiver Overrun Flag */
|
|
#define LPUARTx_STAT_NF ((uint32_t)0x00040000) /*!< Noise Flag */
|
|
#define LPUARTx_STAT_FE ((uint32_t)0x00020000) /*!< Framing Error Flag */
|
|
#define LPUARTx_STAT_PF ((uint32_t)0x00010000) /*!< Parity Error Flag */
|
|
#define LPUARTx_STAT_MA1F ((uint32_t)0x00008000) /*!< Match 1 Flag */
|
|
#define LPUARTx_STAT_MA2F ((uint32_t)0x00004000) /*!< Match 2 Flag */
|
|
|
|
/********* Bits definition for LPUARTx_CTRL register **********/
|
|
#define LPUARTx_CTRL_R8T9 ((uint32_t)0x80000000) /*!< Receive Bit 8 / Transmit Bit 9 */
|
|
#define LPUARTx_CTRL_R9T8 ((uint32_t)0x40000000) /*!< Receive Bit 9 / Transmit Bit 8 */
|
|
#define LPUARTx_CTRL_TXDIR ((uint32_t)0x20000000) /*!< LPUART_TX Pin Direction in Single-Wire Mode */
|
|
#define LPUARTx_CTRL_TXINV ((uint32_t)0x10000000) /*!< Transmit Data Inversion */
|
|
#define LPUARTx_CTRL_ORIE ((uint32_t)0x08000000) /*!< Overrun Interrupt Enable */
|
|
#define LPUARTx_CTRL_NEIE ((uint32_t)0x04000000) /*!< Noise Error Interrupt Enable */
|
|
#define LPUARTx_CTRL_FEIE ((uint32_t)0x02000000) /*!< Framing Error Interrupt Enable */
|
|
#define LPUARTx_CTRL_PEIE ((uint32_t)0x01000000) /*!< Parity Error Interrupt Enable */
|
|
#define LPUARTx_CTRL_TIE ((uint32_t)0x00800000) /*!< Transmit Interrupt Enable */
|
|
#define LPUARTx_CTRL_TCIE ((uint32_t)0x00400000) /*!< Transmission Complete Interrupt Enable */
|
|
#define LPUARTx_CTRL_RIE ((uint32_t)0x00200000) /*!< Receiver Interrupt Enable */
|
|
#define LPUARTx_CTRL_ILIE ((uint32_t)0x00100000) /*!< Idle Line Interrupt Enable */
|
|
#define LPUARTx_CTRL_TE ((uint32_t)0x00080000) /*!< Transmitter Enable */
|
|
#define LPUARTx_CTRL_RE ((uint32_t)0x00040000) /*!< Receiver Enable */
|
|
#define LPUARTx_CTRL_RWU ((uint32_t)0x00020000) /*!< Receiver Wakeup Control */
|
|
#define LPUARTx_CTRL_SBK ((uint32_t)0x00010000) /*!< Send Break */
|
|
#define LPUARTx_CTRL_MA1IE ((uint32_t)0x00008000) /*!< Match 1 Interrupt Enable */
|
|
#define LPUARTx_CTRL_MA2IE ((uint32_t)0x00004000) /*!< Match 2 Interrupt Enable */
|
|
#define LPUARTx_CTRL_IDLECFG_SHIFT 8 /*!< Idle Configuration (shift) */
|
|
#define LPUARTx_CTRL_IDLECFG_MASK ((uint32_t)((uint32_t)0x7 << LPUARTx_CTRL_IDLECFG_SHIFT)) /*!< Idle Configuration (mask) */
|
|
#define LPUARTx_CTRL_IDLECFG(x) ((uint32_t)(((uint32_t)(x) << LPUARTx_CTRL_IDLECFG_SHIFT) & LPUARTx_CTRL_IDLECFG_MASK)) /*!< Idle Configuration */
|
|
#define LPUARTx_CTRL_LOOPS ((uint32_t)0x00000080) /*!< Loop Mode Select */
|
|
#define LPUARTx_CTRL_DOZEEN ((uint32_t)0x00000040) /*!< Doze Enable */
|
|
#define LPUARTx_CTRL_RSRC ((uint32_t)0x00000020) /*!< Receiver Source Select */
|
|
#define LPUARTx_CTRL_M ((uint32_t)0x00000010) /*!< 9-Bit or 8-Bit Mode Select */
|
|
#define LPUARTx_CTRL_WAKE ((uint32_t)0x00000008) /*!< Receiver Wakeup Method Select */
|
|
#define LPUARTx_CTRL_ILT ((uint32_t)0x00000004) /*!< Idle Line Type Select */
|
|
#define LPUARTx_CTRL_PE ((uint32_t)0x00000002) /*!< Parity Enable */
|
|
#define LPUARTx_CTRL_PT ((uint32_t)0x00000001) /*!< Parity Type */
|
|
|
|
/********* Bits definition for LPUARTx_DATA register **********/
|
|
#define LPUARTx_DATA_NOISY ((uint32_t)0x00008000) /*!< The current received dataword contained in DATA[R9:R0] was received with noise */
|
|
#define LPUARTx_DATA_PARITYE ((uint32_t)0x00004000) /*!< The current received dataword contained in DATA[R9:R0] was received with a parity error */
|
|
#define LPUARTx_DATA_FRETSC ((uint32_t)0x00002000) /*!< Frame Error / Transmit Special Character */
|
|
#define LPUARTx_DATA_RXEMPT ((uint32_t)0x00001000) /*!< Receive Buffer Empty */
|
|
#define LPUARTx_DATA_IDLINE ((uint32_t)0x00000800) /*!< Idle Line */
|
|
#define LPUARTx_DATA_R9T9 ((uint32_t)0x00000200) /*!< Read receive data buffer 9 or write transmit data buffer 9 */
|
|
#define LPUARTx_DATA_R8T8 ((uint32_t)0x00000100) /*!< Read receive data buffer 8 or write transmit data buffer 8 */
|
|
#define LPUARTx_DATA_R7T7 ((uint32_t)0x00000080) /*!< Read receive data buffer 7 or write transmit data buffer 7 */
|
|
#define LPUARTx_DATA_R6T6 ((uint32_t)0x00000040) /*!< Read receive data buffer 6 or write transmit data buffer 6 */
|
|
#define LPUARTx_DATA_R5T5 ((uint32_t)0x00000020) /*!< Read receive data buffer 5 or write transmit data buffer 5 */
|
|
#define LPUARTx_DATA_R4T4 ((uint32_t)0x00000010) /*!< Read receive data buffer 4 or write transmit data buffer 4 */
|
|
#define LPUARTx_DATA_R3T3 ((uint32_t)0x00000008) /*!< Read receive data buffer 3 or write transmit data buffer 3 */
|
|
#define LPUARTx_DATA_R2T2 ((uint32_t)0x00000004) /*!< Read receive data buffer 2 or write transmit data buffer 2 */
|
|
#define LPUARTx_DATA_R1T1 ((uint32_t)0x00000002) /*!< Read receive data buffer 1 or write transmit data buffer 1 */
|
|
#define LPUARTx_DATA_R0T0 ((uint32_t)0x00000001) /*!< Read receive data buffer 0 or write transmit data buffer 0 */
|
|
#define LPUARTx_DATA_DATA_SHIFT 0 /*!< Data (shift) */
|
|
#define LPUARTx_DATA_DATA_MASK ((uint32_t)((uint32_t)0x3F << LPUARTx_DATA_DATA_SHIFT)) /*!< Data (mask) */
|
|
#define LPUARTx_DATA_DATA(x) ((uint32_t)(((uint32_t)(x) << LPUARTx_DATA_DATA_SHIFT) & LPUARTx_DATA_DATA_MASK)) /*!< Data */
|
|
|
|
/********* Bits definition for LPUARTx_MATCH register *********/
|
|
#define LPUARTx_MATCH_MA2_SHIFT 16 /*!< Match Address 2 (shift) */
|
|
#define LPUARTx_MATCH_MA2_MASK ((uint32_t)((uint32_t)0x3F << LPUARTx_MATCH_MA2_SHIFT)) /*!< Match Address 2 (mask) */
|
|
#define LPUARTx_MATCH_MA2(x) ((uint32_t)(((uint32_t)(x) << LPUARTx_MATCH_MA2_SHIFT) & LPUARTx_MATCH_MA2_MASK)) /*!< Match Address 2 */
|
|
#define LPUARTx_MATCH_MA1_SHIFT 0 /*!< Match Address 1 (shift) */
|
|
#define LPUARTx_MATCH_MA1_MASK ((uint32_t)((uint32_t)0x3F << LPUARTx_MATCH_MA1_SHIFT)) /*!< Match Address 1 (mask) */
|
|
#define LPUARTx_MATCH_MA1(x) ((uint32_t)(((uint32_t)(x) << LPUARTx_MATCH_MA1_SHIFT) & LPUARTx_MATCH_MA1_MASK)) /*!< Match Address 1 */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Power Management Controller (PMC) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Timer/PWM Module (TPM) */
|
|
/* */
|
|
/****************************************************************/
|
|
/********** Bits definition for TPMx_SC register ***************/
|
|
#define TPMx_SC_DMA ((uint32_t)0x100) /*!< DMA Enable */
|
|
#define TPMx_SC_TOF ((uint32_t)0x80) /*!< Timer Overflow Flag */
|
|
#define TPMx_SC_TOIE ((uint32_t)0x40) /*!< Timer Overflow Interrupt Enable */
|
|
#define TPMx_SC_CPWMS ((uint32_t)0x20) /*!< Center-aligned PWM Select */
|
|
#define TPMx_SC_CMOD_SHIFT 3 /*!< Clock Mode Selection */
|
|
#define TPMx_SC_CMOD_MASK ((uint32_t)((uint32_t)0x3 << TPMx_SC_CMOD_SHIFT))
|
|
#define TPMx_SC_CMOD(x) ((uint32_t)(((uint32_t)(x) << TPMx_SC_CMOD_SHIFT) & TPMx_SC_CMOD_MASK))
|
|
#define TPMx_SC_PS_SHIFT 0 /*!< Prescale Factor Selection */
|
|
#define TPMx_SC_PS_MASK ((uint32_t)((uint32_t)0x7 << TPMx_SC_PS_SHIFT))
|
|
#define TPMx_SC_PS(x) ((uint32_t)(((uint32_t)(x) << TPMx_SC_PS_SHIFT) & TPMx_SC_PS_MASK))
|
|
|
|
/********** Bits definition for TPMx_CNT register **************/
|
|
#define TPMx_CNT_COUNT_SHIFT 0 /*!< Counter Value */
|
|
#define TPMx_CNT_COUNT_MASK ((uint32_t)((uint32_t)0xFFFF << TPMx_CNT_COUNT_SHIFT))
|
|
#define TPMx_CNT_COUNT(x) ((uint32_t)(((uint32_t)(x) << TPMx_CNT_COUNT_SHIFT) & TPMx_CNT_COUNT_MASK))
|
|
|
|
/********** Bits definition for TPMx_MOD register **************/
|
|
#define TPMx_MOD_MOD_SHIFT 0 /*!< Modulo Value */
|
|
#define TPMx_MOD_MOD_MASK ((uint32_t)((uint32_t)0xFFFF << TPMx_MOD_MOD_SHIFT))
|
|
#define TPMx_MOD_MOD(x) ((uint32_t)(((uint32_t)(x) << TPMx_MOD_MOD_SHIFT) & TPMx_MOD_MOD_MASK))
|
|
|
|
/********** Bits definition for TPMx_CnSC register *************/
|
|
#define TPMx_CnSC_CHF ((uint32_t)0x80) /*!< Channel Flag */
|
|
#define TPMx_CnSC_CHIE ((uint32_t)0x40) /*!< Channel Interrupt Enable */
|
|
#define TPMx_CnSC_MSB ((uint32_t)0x20) /*!< Channel Mode Select */
|
|
#define TPMx_CnSC_MSA ((uint32_t)0x10) /*!< Channel Mode Select */
|
|
#define TPMx_CnSC_ELSB ((uint32_t)0x8) /*!< Edge or Level Select */
|
|
#define TPMx_CnSC_ELSA ((uint32_t)0x4) /*!< Edge or Level Select */
|
|
#define TPMx_CnSC_DMA ((uint32_t)0x1) /*!< DMA Enable */
|
|
|
|
/********** Bits definition for TPMx_CnV register **************/
|
|
#define TPMx_CnV_VAL_SHIFT 0 /*!< Channel Value */
|
|
#define TPMx_CnV_VAL_MASK ((uint32_t)((uint32_t)0xFFFF << TPMx_CnV_VAL_SHIFT))
|
|
#define TPMx_CnV_VAL(x) ((uint32_t)(((uint32_t)(x) << TPMx_CnV_VAL_SHIFT) & TPMx_CnV_VAL_MASK))
|
|
|
|
/********* Bits definition for TPMx_STATUS register ************/
|
|
#define TPMx_STATUS_TOF ((uint32_t)0x100) /*!< Timer Overflow Flag */
|
|
#define TPMx_STATUS_CH5F ((uint32_t)0x20) /*!< Channel 5 Flag */
|
|
#define TPMx_STATUS_CH4F ((uint32_t)0x10) /*!< Channel 4 Flag */
|
|
#define TPMx_STATUS_CH3F ((uint32_t)0x8) /*!< Channel 3 Flag */
|
|
#define TPMx_STATUS_CH2F ((uint32_t)0x4) /*!< Channel 2 Flag */
|
|
#define TPMx_STATUS_CH1F ((uint32_t)0x2) /*!< Channel 1 Flag */
|
|
#define TPMx_STATUS_CH0F ((uint32_t)0x1) /*!< Channel 0 Flag */
|
|
|
|
/********** Bits definition for TPMx_POL register **************/
|
|
#define TPMx_POL_POL5 ((uint32_t)0x20) /*!< Channel 5 Polarity */
|
|
#define TPMx_POL_POL4 ((uint32_t)0x10) /*!< Channel 4 Polarity */
|
|
#define TPMx_POL_POL3 ((uint32_t)0x08) /*!< Channel 3 Polarity */
|
|
#define TPMx_POL_POL2 ((uint32_t)0x04) /*!< Channel 2 Polarity */
|
|
#define TPMx_POL_POL1 ((uint32_t)0x02) /*!< Channel 1 Polarity */
|
|
#define TPMx_POL_POL0 ((uint32_t)0x01) /*!< Channel 0 Polarity */
|
|
|
|
/********** Bits definition for TPMx_CONF register *************/
|
|
#define TPMx_CONF_TRGSEL_SHIFT 24 /*!< Trigger Select */
|
|
#define TPMx_CONF_TRGSEL_MASK ((uint32_t)((uint32_t)0xF << TPMx_CONF_TRGSEL_SHIFT))
|
|
#define TPMx_CONF_TRGSEL(x) ((uint32_t)(((uint32_t)(x) << TPMx_CONF_TRGSEL_SHIFT) & TPMx_CONF_TRGSEL_MASK))
|
|
#define TPMx_CONF_TRGSRC ((uint32_t)0x800000) /*!< Trigger Source */
|
|
#define TPMx_CONF_TRGPOL ((uint32_t)0x400000) /*!< Trigger Polarity */
|
|
#define TPMx_CONF_CPOT ((uint32_t)0x80000) /*!< Counter Pause On Trigger */
|
|
#define TPMx_CONF_CROT ((uint32_t)0x40000) /*!< Counter Reload On Trigger */
|
|
#define TPMx_CONF_CSOO ((uint32_t)0x20000) /*!< Counter Stop On Overflow */
|
|
#define TPMx_CONF_CSOT ((uint32_t)0x10000) /*!< Counter Start on Trigger */
|
|
#define TPMx_CONF_GTBEEN ((uint32_t)0x200) /*!< Global time base enable */
|
|
#define TPMx_CONF_GTBSYNC ((uint32_t)0x100) /*!< Global Time Base Synchronization */
|
|
#define TPMx_CONF_DBGMODE_SHIFT 6 /*!< Debug Mode */
|
|
#define TPMx_CONF_DBGMODE_MASK ((uint32_t)((uint32_t)0x3 << TPMx_CONF_DBGMODE_SHIFT))
|
|
#define TPMx_CONF_DBGMODE(x) ((uint32_t)(((uint32_t)(x) << TPMx_CONF_DBGMODE_SHIFT) & TPMx_CONF_DBGMODE_MASK))
|
|
#define TPMx_CONF_DOZEEN ((uint32_t)0x20) /*!< Doze Enable */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* USBFS: Device dependent parts */
|
|
/* */
|
|
/****************************************************************/
|
|
/******** Bits definition for USBx_USBTRC0 register *************/
|
|
#define USBx_USBTRC0_USB_CLK_RECOVERY_INT ((uint8_t)0x04) /* Combined USB Clock Recovery interrupt status */
|
|
|
|
/****** Bits definition for USBx_CLK_RECOVER_CTRL register ******/
|
|
#define USBx_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN ((uint8_t)0x80) /*!< Crystal-less USB enable */
|
|
#define USBx_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN ((uint8_t)0x40) /*!< Reset/resume to rough phase enable */
|
|
#define USBx_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN ((uint8_t)0x20) /*!< Restart from IFR trim value */
|
|
|
|
/****** Bits definition for USBx_CLK_RECOVER_IRC_EN register ****/
|
|
#define USBx_CLK_RECOVER_IRC_EN_IRC_EN ((uint8_t)0x02) /*!< IRC48M enable */
|
|
|
|
/****** Bits definition for USBx_CLK_RECOVER_INT_EN register ****/
|
|
#define USBx_CLK_RECOVER_INT_EN_OVF_ERROR_EN ((uint8_t)0x10) /*!< Determines whether OVF_ERROR condition signal is used in generation of USB_CLK_RECOVERY_INT. */
|
|
|
|
/*** Bits definition for USBx_CLK_RECOVER_INT_STATUS register ***/
|
|
#define USBx_CLK_RECOVER_INT_STATUS_OVF_ERROR ((uint8_t)0x10) /*!< frequency trim adjustment needed for the IRC48M output clock is outside the available TRIM_FINE adjustment range */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Reset Control Module (RCM) */
|
|
/* */
|
|
/****************************************************************/
|
|
/* Device independent parts, plus: */
|
|
/*********** Bits definition for RCM_FM register ****************/
|
|
#define RCM_FM_FORCEROM_SHIFT 1 /*!< Force ROM Boot */
|
|
#define RCM_FM_FORCEROM_MASK ((uint8_t)((uint8_t)0x03 << RCM_FM_FORCEROM_SHIFT))
|
|
#define RCM_FM_FORCEROM(x) ((uint8_t)(((uint8_t)(x) << RCM_FM_FORCEROM_SHIFT) & RCM_FM_FORCEROM_MASK))
|
|
|
|
/*********** Bits definition for RCM_MR register ****************/
|
|
#define RCM_MR_BOOTROM_SHIFT 1 /*!< Boot ROM Configuration */
|
|
#define RCM_MR_BOOTROM_MASK ((uint8_t)((uint8_t)0x03 << RCM_MR_BOOTROM_SHIFT))
|
|
#define RCM_MR_BOOTROM(x) ((uint8_t)(((uint8_t)(x) << RCM_MR_BOOTROM_SHIFT) & RCM_MR_BOOTROM_MASK))
|
|
#define RCM_MR_BOOTROM_FROM_FLASH RCM_MR_BOOTROM(0)
|
|
#define RCM_MR_BOOTROM_FROM_ROM_BOOTCFG0 RCM_MR_BOOTROM(1)
|
|
#define RCM_MR_BOOTROM_FROM_ROM_FOPT RCM_MR_BOOTROM(2)
|
|
#define RCM_MR_BOOTROM_FROM_ROM_BOTH RCM_MR_BOOTROM(3)
|
|
|
|
/********** Bits definition for RCM_SSRS0 register ************/
|
|
#define RCM_SSRS0_SPOR ((uint8_t)0x80) /*!< Sticky Power-On Reset */
|
|
#define RCM_SSRS0_SPIN ((uint8_t)0x40) /*!< Sticky External Reset Pin */
|
|
#define RCM_SSRS0_SWDOG ((uint8_t)0x20) /*!< Sticky Watchdog */
|
|
#define RCM_SSRS0_SLVD ((uint8_t)0x02) /*!< Sticky Low-Voltage Detect Reset */
|
|
#define RCM_SSRS0_SWAKEUP ((uint8_t)0x01) /*!< Sticky Low Leakage Wakeup Reset */
|
|
|
|
/********** Bits definition for RCM_SSRS1 register *************/
|
|
#define RCM_SSRS1_SSACKERR ((uint8_t)0x20) /*!< Sticky Stop Mode Acknowledge Error Reset */
|
|
#define RCM_SSRS1_SMDM_AP ((uint8_t)0x08) /*!< Sticky MDM-AP System Reset Request */
|
|
#define RCM_SSRS1_SSW ((uint8_t)0x04) /*!< Sticky Software */
|
|
#define RCM_SSRS1_SLOCKUP ((uint8_t)0x02) /*!< Sticky Core Lockup */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* System Mode Controller (SMC) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Digital-to-Analog Converter (DAC) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Mostly Device independent */
|
|
|
|
#define DACx_C1_DACBFMD_SHIFT 1 /*!< DAC Buffer Work Mode Select */
|
|
#define DACx_C1_DACBFMD_MASK ((uint8_t)((uint8_t)0x03 << DACx_C1_DACBFMD_ SHIFT))
|
|
#define DACx_C1_DACBFMD(x) ((uint8_t)(((uint8_t)(x) << DACx_C1_DACBFMD_SHIFT) & DACx_C1_DACBFMD_MASK))
|
|
|
|
#define DACx_C1_DACBFMD_MODE_NORMAL 0x0
|
|
#define DACx_C1_DACBFMD_MODE_OTS 0x2
|
|
#define DACx_C1_DACBFMD_MODE_FIFO 0x3
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Real Time Clock (RTC) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Comparator (CMP) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Flash Memory Module (FTFA) */
|
|
/* */
|
|
/****************************************************************/
|
|
|
|
/* Device independent */
|
|
|
|
/****************************************************************/
|
|
/* */
|
|
/* Voltage Reference (VREFV1) */
|
|
/* */
|
|
/****************************************************************/
|
|
/********** Bits definition for VREF_TRM register ***************/
|
|
#define VREF_TRM_CHOPEN ((uint8_t)0x40) /*!< Chop oscillator enable. */
|
|
#define VREF_TRM_TRIM_SHIFT 0 /*!< Trim bits */
|
|
#define VREF_TRM_TRIM_MASK ((uint8_t)((uint8_t)0x3F << VREF_TRM_TRIM_SHIFT))
|
|
#define VREF_TRM_TRIM(x) ((uint8_t)(((uint8_t)(x) << VREF_TRM_TRIM_SHIFT) & VREF_TRM_TRIM_MASK))
|
|
|
|
/********** Bits definition for VREF_SC register ****************/
|
|
#define VREF_SC_VREFEN ((uint8_t)0x80) /*!< Internal Voltage Reference enable */
|
|
#define VREF_SC_REGEN ((uint8_t)0x40) /*!< Regulator enable */
|
|
#define VREF_SC_ICOMPEN ((uint8_t)0x20) /*!< Second order curvature compensation enable */
|
|
#define VREF_SC_VREFST ((uint8_t)0x04) /*!< Internal Voltage Reference stable */
|
|
#define VREF_SC_MODE_LV_SHIFT 0 /*!< Buffer Mode selection */
|
|
#define VREF_SC_MODE_LV_MASK ((uint8_t)((uint8_t)0x3 << VREF_SC_MODE_LV_SHIFT))
|
|
#define VREF_SC_MODE_LV(x) ((uint8_t)(((uint8_t)(x) << VREF_SC_MODE_LV_SHIFT) & VREF_SC_MODE_LV_MASK))
|
|
|
|
#define VREF_SC_MODE_LV_BANDGAP_ONLY VREF_SC_MODE_LV(0)
|
|
#define VREF_SC_MODE_LV_HIGH_POWER VREF_SC_MODE_LV(1)
|
|
#define VREF_SC_MODE_LV_LOW_POWER VREF_SC_MODE_LV(2)
|
|
|
|
#endif /* _KL27ZXXX_H_ */
|