keyboard/qmk/lib/vusb/examples/hid-data/firmware/main.c

142 lines
5.2 KiB
C

/* Name: main.c
* Project: hid-data, example how to use HID for data transfer
* Author: Christian Starkjohann
* Creation Date: 2008-04-11
* Tabsize: 4
* Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
*/
/*
This example should run on most AVRs with only little changes. No special
hardware resources except INT0 are used. You may have to change usbconfig.h for
different I/O pins for USB. Please note that USB D+ must be the INT0 pin, or
at least be connected to INT0 as well.
*/
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/interrupt.h> /* for sei() */
#include <util/delay.h> /* for _delay_ms() */
#include <avr/eeprom.h>
#include <avr/pgmspace.h> /* required by usbdrv.h */
#include "usbdrv.h"
#include "oddebug.h" /* This is also an example for using debug macros */
/* ------------------------------------------------------------------------- */
/* ----------------------------- USB interface ----------------------------- */
/* ------------------------------------------------------------------------- */
PROGMEM const char usbHidReportDescriptor[22] = { /* USB report descriptor */
0x06, 0x00, 0xff, // USAGE_PAGE (Generic Desktop)
0x09, 0x01, // USAGE (Vendor Usage 1)
0xa1, 0x01, // COLLECTION (Application)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x26, 0xff, 0x00, // LOGICAL_MAXIMUM (255)
0x75, 0x08, // REPORT_SIZE (8)
0x95, 0x80, // REPORT_COUNT (128)
0x09, 0x00, // USAGE (Undefined)
0xb2, 0x02, 0x01, // FEATURE (Data,Var,Abs,Buf)
0xc0 // END_COLLECTION
};
/* Since we define only one feature report, we don't use report-IDs (which
* would be the first byte of the report). The entire report consists of 128
* opaque data bytes.
*/
/* The following variables store the status of the current data transfer */
static uchar currentAddress;
static uchar bytesRemaining;
/* ------------------------------------------------------------------------- */
/* usbFunctionRead() is called when the host requests a chunk of data from
* the device. For more information see the documentation in usbdrv/usbdrv.h.
*/
uchar usbFunctionRead(uchar *data, uchar len)
{
if(len > bytesRemaining)
len = bytesRemaining;
eeprom_read_block(data, (uchar *)0 + currentAddress, len);
currentAddress += len;
bytesRemaining -= len;
return len;
}
/* usbFunctionWrite() is called when the host sends a chunk of data to the
* device. For more information see the documentation in usbdrv/usbdrv.h.
*/
uchar usbFunctionWrite(uchar *data, uchar len)
{
if(bytesRemaining == 0)
return 1; /* end of transfer */
if(len > bytesRemaining)
len = bytesRemaining;
eeprom_write_block(data, (uchar *)0 + currentAddress, len);
currentAddress += len;
bytesRemaining -= len;
return bytesRemaining == 0; /* return 1 if this was the last chunk */
}
/* ------------------------------------------------------------------------- */
usbMsgLen_t usbFunctionSetup(uchar data[8])
{
usbRequest_t *rq = (void *)data;
if((rq->bmRequestType & USBRQ_TYPE_MASK) == USBRQ_TYPE_CLASS){ /* HID class request */
if(rq->bRequest == USBRQ_HID_GET_REPORT){ /* wValue: ReportType (highbyte), ReportID (lowbyte) */
/* since we have only one report type, we can ignore the report-ID */
bytesRemaining = 128;
currentAddress = 0;
return USB_NO_MSG; /* use usbFunctionRead() to obtain data */
}else if(rq->bRequest == USBRQ_HID_SET_REPORT){
/* since we have only one report type, we can ignore the report-ID */
bytesRemaining = 128;
currentAddress = 0;
return USB_NO_MSG; /* use usbFunctionWrite() to receive data from host */
}
}else{
/* ignore vendor type requests, we don't use any */
}
return 0;
}
/* ------------------------------------------------------------------------- */
int main(void)
{
uchar i;
wdt_enable(WDTO_1S);
/* If you don't use the watchdog, replace the call above with a wdt_disable().
* On newer devices, the status of the watchdog (on/off, period) is PRESERVED
* OVER RESET!
*/
/* RESET status: all port bits are inputs without pull-up.
* That's the way we need D+ and D-. Therefore we don't need any
* additional hardware initialization.
*/
odDebugInit();
DBG1(0x00, 0, 0); /* debug output: main starts */
usbInit();
usbDeviceDisconnect(); /* enforce re-enumeration, do this while interrupts are disabled! */
i = 0;
while(--i){ /* fake USB disconnect for > 250 ms */
wdt_reset();
_delay_ms(1);
}
usbDeviceConnect();
sei();
DBG1(0x01, 0, 0); /* debug output: main loop starts */
for(;;){ /* main event loop */
DBG1(0x02, 0, 0); /* debug output: main loop iterates */
wdt_reset();
usbPoll();
}
return 0;
}
/* ------------------------------------------------------------------------- */