kemonine/keyboard
kemonine
/
keyboard
1
0
Fork 0
Code Issues Pull Requests Releases 2 Activity
keyboard/qmk/keyboards/jm60
History
kemonine f7a73edb1f Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
..
boards/JM60_BOARD Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
keymaps Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
ld Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
chconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
config.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
halconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
jm60.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
jm60.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
led.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
matrix.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
mcuconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.md Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
rules.mk Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

readme.md

JM60

A compact 60% keyboard with full RGB led support.

Keyboard Maintainer: QMK Community
Hardware Supported: JM60
Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)

Make example for this keyboard (after setting up your build environment):

make jm60:default:bin

See build environment setup then the make instructions for more information.

Flashing Instructions

  1. from the qmk_firmware directory run:
$ make jm60:default:bin

  1. rename 'jm60_default.bin' to 'jm60_default.firmware'

  2. Press 'R' and reconnect the keyboard.

  3. Start the original Configuration Tool and flash 'jm60_default.bin'