History

kemonine 089047d1e3 Update qmk sources		2020-12-25 15:21:40 -05:00
..
keymaps	Update qmk sources	2020-12-25 15:21:40 -05:00
chconf.h	Update qmk sources	2020-12-25 15:21:40 -05:00
config.h	Update qmk sources	2020-12-25 15:21:40 -05:00
halconf.h	Update qmk sources	2020-12-25 15:21:40 -05:00
info.json	Update qmk sources	2020-12-25 15:21:40 -05:00
mcuconf.h	Update qmk sources	2020-12-25 15:21:40 -05:00
readme.md	Update qmk sources	2020-12-25 15:21:40 -05:00
rules.mk	Update qmk sources	2020-12-25 15:21:40 -05:00
styrka.c	Update qmk sources	2020-12-25 15:21:40 -05:00
styrka.h	Update qmk sources	2020-12-25 15:21:40 -05:00

readme.md

Viktus Styrka

The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner). All design done by BlindAssassin111. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock.

The PCB is an arm powered board utilizing the STM32F072CBT6 mcu. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.).

On the PCB is a single button for a reset for flashing. As well, there is a Segger J-Link 6-pin Needle Adapter footprint for reflashing the mcu as a backup in case of a bootloader issue.

Keyboard Maintainer: jrfhoutx, blindassassin111
Hardware Supported: Styrka
Hardware Availability: https://www.Viktus.Design

Make example for this keyboard (after setting up your build environment):

make viktus/styrka:default

Flashing example for this keyboard:

make viktus/styrka:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.