keyboard/qmk/lib/chibios/testhal/STM32/STM32F3xx/IRQ_STORM
2020-09-24 23:24:14 -04:00
..
debug Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
chconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
halconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
main.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
Makefile Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
mcuconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.txt Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

*****************************************************************************
** ChibiOS/HAL - IRQ_STORM stress test demo for STM32F3xx.                 **
*****************************************************************************

** TARGET **

The demo runs on an STMicroelectronics STM32F3-Discovery board.

** The Demo **

The application demonstrates the use of the STM32F3xx GPT, PAL and Serial
drivers in order to implement a system stress demo.

** Board Setup **

- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
- Connect a terminal emulator to the transceiver (38400-N-8-1).

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com