keyboard/keyboards/zmk-config/config/tidbit.conf
2020-12-19 22:34:40 +00:00

55 lines
1.3 KiB
Plaintext

# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT
# Enable Encoders
#CONFIG_EC11=y
#CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y
# Enable underglow
#CONFIG_ZMK_RGB_UNDERGLOW=y
# Use the STRIP config specific to the LEDs you're using
#CONFIG_WS2812_STRIP=y
# Display
CONFIG_ZMK_DISPLAY=y
# Number of BT Profiles
CONFIG_BT_MAX_CONN=6
# Set screen blanking to 15s instead of 30s
CONFIG_ZMK_IDLE_TIMEOUT=15000
# Save settings after 10s instaed of 60s
#CONFIG_ZMK_SETTINGS_SAVE_DEBOUNCE=10000
################################################################################
# Debugging
################################################################################
# Turn on logging, and set ZMK logging to debug output
CONFIG_LOG=y
CONFIG_ZMK_LOG_LEVEL_DBG=y
# Turn on USB CDC ACM device
CONFIG_USB=y
CONFIG_USB_DEVICE_STACK=y
CONFIG_USB_CDC_ACM=y
CONFIG_USB_CDC_ACM_RINGBUF_SIZE=1024
CONFIG_USB_CDC_ACM_DEVICE_NAME="CDC_ACM"
CONFIG_USB_CDC_ACM_DEVICE_COUNT=1
# Enable serial console
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_UART_LINE_CTRL=y
# Enable USB UART, and set the console device
CONFIG_UART_CONSOLE=y
CONFIG_USB_UART_CONSOLE=y
CONFIG_UART_CONSOLE_ON_DEV_NAME="CDC_ACM_0"
# Sensor logging
CONFIG_SENSOR_LOG_LEVEL_DBG=y
#CONFIG_SENSOR_LOG_LEVEL=4
CONFIG_SENSOR_INIT_PRIORITY=90