keyboard

History

kemonine f7a73edb1f Add back qmk firmware that's been updated for kemonine setups		2020-09-24 23:24:14 -04:00
..
debug	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
Makefile	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
chconf.h	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
halconf.h	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
halconf_community.h	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
main.c	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
mcuconf.h	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
patch_hex.sh	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
readme.txt	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M0 OSHChip (nRF51822).                  **
*****************************************************************************

** TARGET **

The demo runs on an OSHChip_V1.0 board. This board is powered by a Nordic
Semiconductor nRF51822 processor which is an ARM Cortex-M0 with bluetooth radio
hardware. For information about the board, see http://oshchip.org/

** The Demo **

This demo will print the standard TestThread output over UART (TX is DIP Pin 1) and sequentially blink all three LEDs.

** Build Procedure **

The demo has been tested using the freely available GCC ARM Embedded toolchain.

** Notes **

If the Mass Storage mechanism of the official OSHChip CMSIS-DAP debugger is desired for flashing the firmware, the hex file may need patching to be accepted by the Mass Storage flasher; see `patch_hex.sh`.