keyboard/src_mdloader/atmel/applet.h

297 lines
9.1 KiB
C

/* ----------------------------------------------------------------------------
* SAM Software Package License
* ----------------------------------------------------------------------------
* Copyright (c) 2013, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
#ifndef APPLET_H
#define APPLET_H
/*----------------------------------------------------------------------------
* Global definitions
*----------------------------------------------------------------------------*/
/** Refers to the Version of SAM-BA */
#define SAM_BA_APPLETS_VERSION "2.16"
/** Applet initialization command code.*/
#define APPLET_CMD_INIT 0x00
/** Applet full erase command code.*/
#define APPLET_CMD_FULL_ERASE 0x01
/** Applet write command code.*/
#define APPLET_CMD_WRITE 0x02
/** Applet read command code.*/
#define APPLET_CMD_READ 0x03
/** Applet read command code.*/
#define APPLET_CMD_LOCK 0x04
/** Applet read command code.*/
#define APPLET_CMD_UNLOCK 0x05
/** Applet set/clear GPNVM command code.*/
#define APPLET_CMD_GPNVM 0x06
/** Applet set security bit command code.*/
#define APPLET_CMD_SECURITY 0x07
/** Applet buffer erase command code.*/
#define APPLET_CMD_BUFFER_ERASE 0x08
/** Applet binary page command code for Dataflash.*/
#define APPLET_CMD_BINARY_PAGE 0x09
/** List Bad Blocks of a Nandflash*/
#define APPLET_CMD_LIST_BAD_BLOCKS 0x10
/** Tag a Nandflash Block*/
#define APPLET_CMD_TAG_BLOCK 0x11
/** Read the Unique ID bits (on SAM3)*/
#define APPLET_CMD_READ_UNIQUE_ID 0x12
/** Applet blocks erase command code. */
#define APPLET_CMD_ERASE_BLOCKS 0x13
/** Applet batch full erase command code. */
#define APPLET_CMD_BATCH_ERASE 0x14
/** Applet row erase command */
#define APPLET_CMD_ERASE_ROW 0x40
/** Applet read device ID command */
#define APPLET_CMD_READ_DEVICE_ID 0x41
/** Applet read lock bits command */
#define APPLET_CMD_READ_LOCKS 0x42
/** Applet read fuses command */
#define APPLET_CMD_READ_FUSES 0x43
/** Applet erase application section command */
#define APPLET_CMD_ERASE_APP 0x44
/** Applet information command */ //Massdrop Specific
#define APPLET_CMD_INFO 0xF0
/** Operation was successful.*/
#define APPLET_SUCCESS 0x00
/** Device unknown.*/
#define APPLET_DEV_UNKNOWN 0x01
/** Write operation failed.*/
#define APPLET_WRITE_FAIL 0x02
/** Read operation failed.*/
#define APPLET_READ_FAIL 0x03
/** Protect operation failed.*/
#define APPLET_PROTECT_FAIL 0x04
/** Unprotect operation failed.*/
#define APPLET_UNPROTECT_FAIL 0x05
/** Erase operation failed.*/
#define APPLET_ERASE_FAIL 0x06
/** No device defined in board.h*/
#define APPLET_NO_DEV 0x07
/** Read / write address is not aligned*/
#define APPLET_ALIGN_ERROR 0x08
/** Read / write found bad block*/
#define APPLET_BAD_BLOCK 0x09
/** Applet failure.*/
#define APPLET_FAIL 0x0f
/** Communication link identification*/
#define USB_COM_TYPE 0x00
#define DBGU_COM_TYPE 0x01
#define JTAG_COM_TYPE 0x02
/** \brief Structure for storing parameters for each command that can be
* performed by the applet. */
//Note: 9 x 32-bit word in size
typedef struct mailbox_s {
/** Command send to the monitor to be executed. */
uint32_t command;
/** Returned status, updated at the end of the monitor execution.*/
uint32_t status;
/** Input Arguments in the argument area. */
union {
/** Input arguments for the Init command.*/
struct {
/** Communication link used.*/
uint32_t comType;
/** Trace level.*/
uint32_t traceLevel;
/** Memory Bank to write in.*/
uint32_t bank;
} inputInit;
/** Output arguments for the Init command.*/
struct {
/** Memory size.*/
uint32_t memorySize;
/** Buffer address.*/
uint32_t bufferAddress;
/** Buffer size.*/
uint32_t bufferSize;
struct {
/** Lock region size in byte.*/
uint16_t lockRegionSize;
/** Number of Lock Bits.*/
uint16_t numbersLockBits;
} memoryInfo;
/** extended infos.*/
uint32_t pageSize;
uint32_t nbPages;
uint32_t appStartPage;
} outputInit;
/** Input arguments for the Write command.*/
struct {
/** Buffer address.*/
uint32_t bufferAddr;
/** Buffer size.*/
uint32_t bufferSize;
/** Memory offset.*/
uint32_t memoryOffset;
} inputWrite;
/** Output arguments for the Write command.*/
struct {
/** Bytes written.*/
uint32_t bytesWritten;
} outputWrite;
/** Input arguments for the Read command.*/
struct {
/** Buffer address.*/
uint32_t bufferAddr;
/** Buffer size.*/
uint32_t bufferSize;
/** Memory offset.*/
uint32_t memoryOffset;
} inputRead;
/** Output arguments for the Read command.*/
struct {
/** Bytes read.*/
uint32_t bytesRead;
} outputRead;
/** Input arguments for the Full Erase command.*/
/** NONE*/
/** Input arguments for the Lock row command.*/
struct {
/** Row number to be lock.*/
uint32_t row;
} inputLock;
/** Output arguments for the Lock row command.*/
/** NONE*/
/** Input arguments for the Unlock row command.*/
struct {
/** Row number to be unlock.*/
uint32_t row;
} inputUnlock;
/** Output arguments for the Unlock row command.*/
/** NONE*/
/** Input arguments for the set security bit command.*/
/** NONE*/
/** Output arguments for the set security bit command.*/
/** NONE*/
/** Input arguments for the Read Locks command. */
/** NONE */
/** Output arguments for the Read Locks command. */
struct {
/** Buffer address. */
uint32_t bufferAddr;
} outputReadLocks;
/** Input arguments for the Read Fuses command. */
/** NONE */
/** Output arguments for the Read Fuses command. */
struct {
/** Buffer address. */
uint32_t bufferAddr;
} outputReadFuses;
/** Input arguments for the Read Unique SN command.*/
struct {
/** Buffer address.*/
uint32_t bufferAddr;
} inputReadUniqueID;
/** Output arguments for the Read Unique SN command.*/
/** NONE*/
/** Input arguments for the Security command.*/
struct {
/** Activates*/
uint32_t action;
} inputSecurity;
/** Output arguments for the Security command.*/
/** NONE */
/** Input arguments for the erase row command.*/
struct {
/** page.*/
uint32_t row;
} inputEraseRow;
/** Output arguments for the erase row command.*/
/*NONE*/
/** Input arguments for the erase app command */
struct {
/** Starting row number */
uint32_t start_row;
/** Ending row number */
uint32_t end_row;
} inputEraseApp;
/** Output arguments for the erase app command */
/** NONE */
/** Input arguments for information command */ //Massdrop Specific
/** NONE */
/** Output arguments for information command */ //Massdrop Specific
struct {
/** Applet version number */
uint16_t version_number;
} outputInfo;
} argument;
} mailbox_t;
#endif /* #ifndef APPLET_H */