keyboard/qmk/lib/chibios/os/ex/Bosch/bmp085.c

789 lines
22 KiB
C

/*
ChibiOS - Copyright (C) 2016..2017 Theodore Ateba
This file is part of ChibiOS.
ChibiOS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file bmp085.c
* @brief BMP085 Digital pressure sensor interface module code.
*
* @addtogroup BMP085
* @ingroup EX_BOSCH
* @{
*/
#include "hal.h"
#include "bmp085.h"
/*==========================================================================*/
/* Driver local definitions. */
/*==========================================================================*/
#define BMP085_SAD 0x77
#define BMP085_CR_P_VAL0 0x34
#define BMP085_CR_P_VAL1 0x74
#define BMP085_CR_P_VAL2 0xB4
#define BMP085_CR_P_VAL3 0xF4
#define BMP085_CR_T_VAL 0x2E
/*==========================================================================*/
/* Driver exported variables. */
/*==========================================================================*/
/*==========================================================================*/
/* Driver local variables and types. */
/*==========================================================================*/
/*==========================================================================*/
/* Driver local functions. */
/*==========================================================================*/
#if (BMP085_USE_I2C) || defined(__DOXYGEN__)
/**
* @brief Reads registers value using I2C.
* @pre The I2C interface must be initialized and the driver started.
*
* @param[in] i2cp pointer to the I2C interface
* @param[in] reg first sub-register address
* @param[out] rxbufp pointer to an output buffer
* @param[in] n number of consecutive register to read
*
* @return the operation status
* @notapi
*/
msg_t bmp085I2CReadRegister(I2CDriver *i2cp, uint8_t reg, uint8_t *rxbufp,
size_t n) {
uint8_t txbuf = reg;
return i2cMasterTransmitTimeout(i2cp, BMP085_SAD, &txbuf, 1, rxbufp, n,
TIME_INFINITE);
}
/**
* @brief Writes a value into a register using I2C.
* @pre The I2C interface must be initialized and the driver started.
*
* @param[in] i2cp pointer to the I2C interface
* @param[in] txbufp buffer containing sub-address value in first position
* and values to write
* @param[in] n size of txbuf less one (not considering the first
* element)
*
* @return the operation status
* @notapi
*/
msg_t bmp085I2CWriteRegister(I2CDriver *i2cp, uint8_t *txbufp, size_t n) {
return i2cMasterTransmitTimeout(i2cp, BMP085_SAD, txbufp, n + 1, NULL, 0,
TIME_INFINITE);
}
#endif /* BMP085_USE_I2C */
/**
* @brief Read all the calibration data from the BMP085 EEPROM.
* @pre The I2C interface must be initialized and the driver started.
*
* @param[in] devp pointer to the BMP085 device driver sensor
* @param[in] reg first calibration coefficient register to read
*
* @return msg the operation status
*/
static msg_t bmp085ReadCoefficient(BMP085Driver *devp, uint8_t reg) {
uint8_t rxbuf[22];
#if BMP085_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
msg_t msg = bmp085I2CReadRegister(devp->config->i2cp, reg, rxbuf, 22);
#if BMP085_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
if (msg == MSG_OK) {
devp->calibrationdata.ac1 = ((rxbuf[ 0] << 8) | rxbuf[ 1]);
devp->calibrationdata.ac2 = ((rxbuf[ 2] << 8) | rxbuf[ 3]);
devp->calibrationdata.ac3 = ((rxbuf[ 4] << 8) | rxbuf[ 5]);
devp->calibrationdata.ac4 = ((rxbuf[ 6] << 8) | rxbuf[ 7]);
devp->calibrationdata.ac5 = ((rxbuf[ 8] << 8) | rxbuf[ 9]);
devp->calibrationdata.ac6 = ((rxbuf[10] << 8) | rxbuf[11]);
devp->calibrationdata.b1 = ((rxbuf[12] << 8) | rxbuf[13]);
devp->calibrationdata.b2 = ((rxbuf[14] << 8) | rxbuf[15]);
devp->calibrationdata.mb = ((rxbuf[16] << 8) | rxbuf[17]);
devp->calibrationdata.mc = ((rxbuf[18] << 8) | rxbuf[19]);
devp->calibrationdata.md = ((rxbuf[20] << 8) | rxbuf[21]);
}
return msg;
}
/**
* @brief Calcul the true temperature.
*
* @param[in] devp pointer to the BMP085 device driver sensor
* @param[in] ut uncompensated temperature
* @param[out] ctp pointer of the compensated temperature
*/
static void calcul_t(BMP085Driver *devp, int32_t ut, float *ctp) {
int32_t x1, x2;
/* Converting the temperature value. */
x1 = ((ut - devp->calibrationdata.ac6) * devp->calibrationdata.ac5) >> 15;
x2 = (devp->calibrationdata.mc << 11) / (x1 + devp->calibrationdata.md);
devp->calibrationdata.b5 = x1 + x2;
*ctp = (float)((devp->calibrationdata.b5 + 8) >> 4)*BMP085_T_RES;
}
/**
* @brief Calcul the true pressure.
*
* @param[in] devp pointer to the BMP085 device driver sensor
* @param[in] up uncompensated pressure
* @param[in] oss over sampling setting
* @param[out] cpp pointer of the compensated pressure
*/
static void calcul_p(BMP085Driver *devp, int32_t up, uint8_t oss, float *cpp) {
int32_t press;
int32_t x1,x2,x3;
int32_t b3,b6;
uint32_t b4,b7;
/* Converting the pressure value. */
b6 = devp->calibrationdata.b5 - 4000;
x1 = (devp->calibrationdata.b2 * ((b6 * b6) >> 12)) >> 11;
x2 = (devp->calibrationdata.ac2 * b6) >> 11;
x3 = x1 + x2;
b3 = ((((int32_t)devp->calibrationdata.ac1 * 4 + x3) << oss) + 2) >> 2;
x1 = ((devp->calibrationdata.ac3)*b6) >> 13;
x2 = (devp->calibrationdata.b1 * (b6*b6 >> 12)) >> 16;
x3 = ((x1 + x2) + 2) >> 2;
b4 = devp->calibrationdata.ac4 * (uint32_t)(x3 + 32768) >> 15;
b7 = ((uint32_t)up - b3)*(50000 >> oss);
if (b7 < 0x80000000)
press = (b7*2)/b4;
else
press = (b7/b4)*2;
x1 = (press >> 8)*(press >> 8);
x1 = (x1*3038) >> 16;
x2 = (-7357*press) >> 16;
*cpp =(float)((press + ((x1 + x2 + 3791) >> 4))*BMP085_P_RES);
}
/**
* @brief Start temperature measurement.
*
* @param[in] devp pointer to the BMP085 device driver
*
* @return the operation status
*/
static msg_t start_t_measurement(BMP085Driver *devp) {
uint8_t txbuf[2] = {BMP085_AD_CR, BMP085_CR_T_VAL};
i2cAcquireBus(devp->config->i2cp);
msg_t msg = bmp085I2CWriteRegister(devp->config->i2cp, txbuf, 2);
i2cReleaseBus(devp->config->i2cp);
/* Conversion time for the temperature. */
chThdSleepMilliseconds(BMP085_THERMO_CT_LOW);
//chThdSleepMilliseconds(devp->config.tct); // TODO: use this instead of the top line:
return msg;
}
/**
* @brief Start the pressure measurment.
*
* @param[in] devp pointer to the BMP085 driver
* @return msg the operation status
*/
static msg_t start_p_measurement(BMP085Driver *devp) {
uint8_t oss, delay;
uint8_t txbuf[2];
oss = devp->config->oss;
txbuf[0] = BMP085_AD_CR;
/* Check the oss according the bmp085 mode. */
if (oss == BMP085_BARO_OSS_0) {
txbuf[1] = BMP085_CR_P_VAL0 + (oss << 6);
delay = BMP085_BARO_CT_LOW;
}
else if (oss == BMP085_BARO_OSS_1) {
txbuf[1] = BMP085_CR_P_VAL1 + (oss << 6);
delay = BMP085_BARO_CT_STD;
}
else if (oss == BMP085_BARO_OSS_2) {
txbuf[1] = BMP085_CR_P_VAL2 + (oss << 6);
delay = BMP085_BARO_CT_HR;
}
else {
txbuf[1] = BMP085_CR_P_VAL3 + (oss << 6);
delay = BMP085_BARO_CT_LUHR;
}
/* Start the sensor for sampling. */
#if BMP085_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
msg_t msg = bmp085I2CWriteRegister(devp->config->i2cp, txbuf, 2);
#if BMP085_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
/* Conversion time for the pressure, max time for the moment. */
chThdSleepMilliseconds(delay);
return msg;
}
/**
* @brief Read the uncompensated temperature from the BMP085 register.
*
* @param[in] devp pointer to the BMP085 driver
* @param[out] utemp uncompensated temperature read from the sensor register
*
* @return msg the operation status
*/
static msg_t acquire_ut(BMP085Driver *devp, int32_t *utemp) {
uint8_t rxbuf[2];
msg_t msg;
/* Start the temperature measurement. */
start_t_measurement(devp);
/* Start the sensor for sampling. */
#if BMP085_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
/* Get the temperature. */
msg = bmp085I2CReadRegister(devp->config->i2cp, BMP085_AD_T_DR_MSB, rxbuf,
2);
#if BMP085_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
if(msg == MSG_OK){
/* Building the uncompensated temperature value. */
*utemp = (int32_t)((rxbuf[0] << 8) | rxbuf[1]);
}
return msg;
}
/**
* @brief Read the uncompensated pressure from the BMP085 register.
*
* @param[in] devp pointer to the BMP085 driver
* @param[out] upress uncompensated pressure read from the sensor register
*
* @return msg the operation status
*/
static msg_t acquire_up(BMP085Driver *devp, int32_t *upress) {
uint8_t rxbuf[3];
uint8_t oss;
msg_t msg;
/* Get the oversampling setting from the driver configuratioin. */
oss = devp->config->oss;
/* Start the pressure measurement. */
start_p_measurement(devp);
/* Start the sensor for sampling. */
#if BMP085_SHARED_I2C
i2cAcquireBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
/* Get the pressure */
msg = bmp085I2CReadRegister(devp->config->i2cp, BMP085_AD_P_DR_MSB, rxbuf,
3);
#if BMP085_SHARED_I2C
i2cReleaseBus(devp->config->i2cp);
#endif /* BMP085_SHARED_I2C */
if (msg == MSG_OK) {
/* Building the uncompensated pressure value. */
*upress = (int32_t)((rxbuf[0] << 16)|(rxbuf[1] << 8)|rxbuf[2]);
*upress = *upress >> (8-oss);
}
return msg;
}
/*==========================================================================*/
/* Interface implementation. */
/*==========================================================================*/
/**
* @brief Get the barometer number of axes.
*
* @param[in] ip interface pointer of the BMP085 sensor
*
* @return barometer number of axes
*/
static size_t baro_get_axes_number(void *ip) {
osalDbgCheck(ip != NULL);
return BMP085_BARO_NUMBER_OF_AXES;
}
/**
* @brief Get the thermometer number of axes.
*
* @param[in] ip interface pointer of the BMP085 sensor
*
* @return thermometer number of axes
*/
static size_t thermo_get_axes_number(void *ip) {
osalDbgCheck(ip != NULL);
return BMP085_THERMO_NUMBER_OF_AXES;
}
/**
* @brief Get the sensor number of axes.
*
* @param[in] ip interface pointer of the BMP085 sensor
*
* @return sensor number of axes
*/
static size_t sens_get_axes_number(void *ip) {
osalDbgCheck(ip != NULL);
return (baro_get_axes_number(ip) + thermo_get_axes_number(ip));
}
/**
* @brief Read baromether raw data.
*
* @param[in] ip interface pointer of the sensor
* @param[in] axes buffer for various axes data
*
* @return msg the result of the reading operation
*/
static msg_t baro_read_raw(void *ip, int32_t axes[]) {
osalDbgCheck((ip != NULL) && (axes != NULL));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"baro_read_raw(), invalid state");
#if BMP085_USE_I2C
osalDbgAssert((((BMP085Driver *)ip)->config->i2cp->state == I2C_READY),
"baro_read_raw(), channel not ready");
#if BMP085_SHARED_I2C
i2cAcquireBus(((BMP085Driver *)ip)->config->i2cp);
i2cStart(((BMP085Driver *)ip)->config->i2cp,
((BMP085Driver *)ip)->config->i2ccfg);
#endif /* BMP085_SHARED_I2C. */
/* Measure the uncompensated pressure. */
msg_t msg = acquire_up(((BMP085Driver *)ip), axes);
#if BMP085_SHARED_I2C
i2cReleaseBus(((BMP085Driver *)ip)->config->i2cp);
#endif /* BMP085_SHARED_I2C. */
#endif /* BMP085_USE_I2C. */
return msg;
}
/**
* @brief Read thermometer raw data.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] axes buffer for various axes data
*
* @return msg the result of the reading operation
*/
static msg_t thermo_read_raw(void *ip, int32_t axes[]) {
osalDbgCheck((ip != NULL) && (axes != NULL));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"thermo_read_raw(), invalid state");
#if BMP085_USE_I2C
osalDbgAssert((((BMP085Driver *)ip)->config->i2cp->state == I2C_READY),
"thermo_read_raw(), channel not ready");
#if BMP085_SHARED_I2C
i2cAcquireBus(((BMP085Driver *)ip)->config->i2cp);
i2cStart(((BMP085Driver *)ip)->config->i2cp,
((BMP085Driver *)ip)->config->i2ccfg);
#endif /* BMP085_SHARED_I2C. */
/* Measure the uncompensated temperature. */
msg_t msg = acquire_ut(((BMP085Driver *)ip), axes);
#if BMP085_SHARED_I2C
i2cReleaseBus(((LSM303DLHCDriver *)ip)->config->i2cp);
#endif /* BMP085_SHARED_I2C. */
#endif /* BMP085_USE_I2C. */
return msg;
}
/**
* @brief Read BMP085 sensor raw data.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] axes buffer for various axes data
*
* @return msg the result of the reading operation
*/
static msg_t sens_read_raw(void *ip, int32_t axes[]) {
int32_t* bp = axes;
msg_t msg;
msg = baro_read_raw(ip, bp);
if (msg != MSG_OK)
return msg;
bp += BMP085_BARO_NUMBER_OF_AXES;
msg = thermo_read_raw(ip, bp);
return msg;
}
/**
* @brief Read barometer cooked data.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] axes buffer for various axes data
*
* @return msg the result of the reading operation
*/
static msg_t baro_read_cooked(void *ip, float axes[]) {
uint32_t i;
int32_t raw[BMP085_BARO_NUMBER_OF_AXES];
msg_t msg;
uint8_t oss;
osalDbgCheck((ip != NULL) && (axes != NULL));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"baro_read_cooked(), invalid state");
msg = baro_read_raw(ip, raw);
oss = ((BMP085Driver *)ip)->config->oss;
for (i = 0; i < BMP085_BARO_NUMBER_OF_AXES; i++)
calcul_p(ip, raw[i], oss, &axes[i]);
return msg;
}
/**
* @brief Read thermometer cooked data.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] axes buffer for various axes data
*
* @return msg the result of the reading operation
*/
static msg_t thermo_read_cooked(void *ip, float axes[]) {
uint32_t i;
int32_t raw[BMP085_THERMO_NUMBER_OF_AXES];
msg_t msg;
osalDbgCheck(((ip != NULL) && (axes != NULL)));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"thermo_read_cooked(), invalid state");
msg = thermo_read_raw(ip, raw);
for (i = 0; i < BMP085_THERMO_NUMBER_OF_AXES; i++)
calcul_t(ip, raw[i], &axes[i]);
return msg;
}
/**
* @brief Read BMP085 sensor cooked data.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] axes buffer for various axes data
*
* @return msg the result of the reading operation
*/
static msg_t sens_read_cooked(void *ip, float axes[]) {
float* bp = axes;
msg_t msg;
msg = baro_read_cooked(ip, bp);
if (msg != MSG_OK)
return msg;
bp += BMP085_BARO_NUMBER_OF_AXES;
msg = thermo_read_cooked(ip, bp);
return msg;
}
/**
* @brief Set the barometer bias.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] bp pointer to the bias value
*
* @return msg the result of the setting operation
*/
static msg_t baro_set_bias(void *ip, float *bp) {
osalDbgCheck((ip != NULL) && (bp !=NULL));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY) ||
(((BMP085Driver *)ip)->state == BMP085_STOP),
"baro_set_bias(), invalid state");
return MSG_OK;
}
/**
* @brief Set the thermometer bias.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] bp pointer to the bias value
*
* @return msg the result of the setting operation
*/
static msg_t thermo_set_bias(void *ip, float *bp) {
osalDbgCheck((ip != NULL) && (bp !=NULL));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY) ||
(((BMP085Driver *)ip)->state == BMP085_STOP),
"thermo_set_bias(), invalid state");
return MSG_OK;
}
/**
* @brief Reset the barometer bias.
*
* @param[in] ip interface pointer of the BMP085 sensor
*
* @return msg the result of the reset operation
*/
static msg_t baro_reset_bias(void *ip) {
osalDbgCheck(ip != NULL);
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY) ||
(((BMP085Driver *)ip)->state == BMP085_STOP),
"baro_reset_bias(), invalid state");
return MSG_OK;
}
/**
* @brief Reset the thermometer bias.
*
* @param[in] ip interface pointer of the BMP085 sensor
*
* @return msg the result of the reset operation
*/
static msg_t thermo_reset_bias(void *ip) {
osalDbgCheck(ip != NULL);
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY) ||
(((BMP085Driver *)ip)->state == BMP085_STOP),
"thermo_reset_bias(), invalid state");
return MSG_OK;
}
/**
* @brief Set the barometer sensivity.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] sp pointer to the sensivity value
*
* @return msg the result of the setting operation
*/
static msg_t baro_set_sensivity(void *ip, float *sp) {
osalDbgCheck((ip != NULL) && (sp !=NULL));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"baro_set_sensivity(), invalid state");
return MSG_OK;
}
/**
* @brief Set the thermometer sensivity.
*
* @param[in] ip interface pointer of the BMP085 sensor
* @param[in] sp pointer to the sensivity value
*
* @return msg the result of the setting operation
*/
static msg_t thermo_set_sensivity(void *ip, float *sp) {
osalDbgCheck((ip != NULL) && (sp !=NULL));
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"thermo_set_sensivity(), invalid state");
return MSG_OK;
}
/**
* @brief Reset the barometer sensivity.
*
* @param[in] ip interface pointer of the BMP085 sensor
*
* @return msg the result of the reset operation
*/
static msg_t baro_reset_sensivity(void *ip) {
osalDbgCheck(ip != NULL);
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"baro_reset_sensivity(), invalid state");
return MSG_OK;
}
/**
* @brief Reset the thermometer sensivity.
*
* @param[in] ip interface pointer of the BMP085 sensor
*
* @return msg the result of the reset operation
*/
static msg_t thermo_reset_sensivity(void *ip) {
osalDbgCheck(ip != NULL);
osalDbgAssert((((BMP085Driver *)ip)->state == BMP085_READY),
"thermo_reset_sensivity(), invalid state");
return MSG_OK;
}
static const struct BaseSensorVMT vmt_basesensor = {
sens_get_axes_number, sens_read_raw, sens_read_cooked
};
static const struct BaseBarometerVMT vmt_basebarometer = {
baro_get_axes_number, baro_read_raw, baro_read_cooked,
baro_set_bias, baro_reset_bias,
baro_set_sensivity, baro_reset_sensivity
};
static const struct BaseThermometerVMT vmt_basethermometer = {
thermo_get_axes_number, thermo_read_raw, thermo_read_cooked,
thermo_set_bias, thermo_reset_bias,
thermo_set_sensivity, thermo_reset_sensivity
};
/*==========================================================================*/
/* Driver exported functions. */
/*==========================================================================*/
/**
* @brief Initializes an instance.
*
* @param[out] devp pointer to the @p BMP085Driver object
*
* @init
*/
void bmp085ObjectInit(BMP085Driver *devp) {
devp->vmt_basesensor = &vmt_basesensor;
devp->vmt_basebarometer = &vmt_basebarometer;
devp->vmt_basethermometer = &vmt_basethermometer;
devp->config = NULL;
devp->state = BMP085_STOP;
}
/**
* @brief Configures and activates BMP085 Complex Driver peripheral.
*
* @param[in] devp pointer to the @p BMP085Driver object
* @param[in] config pointer to the @p BMP085Config object
*
* @api
*/
void bmp085Start(BMP085Driver *devp, const BMP085Config *config) {
osalDbgCheck((devp != NULL) && (config != NULL));
osalDbgAssert((devp->state == BMP085_STOP) ||
(devp->state == BMP085_READY),
"bmp085cStart(), invalid state");
devp->config = config;
#if BMP085_USE_I2C
#if BMP085_SHARED_I2C
i2cAcquireBus((devp)->config->i2cp);
#endif /* BMP085_SHARED_I2C. */
/* Read the Calibrations data. */
i2cStart((devp)->config->i2cp, (devp)->config->i2ccfg);
bmp085ReadCoefficient(devp, BMP085_AD_CC_AC1_MSB);
#if BMP085_SHARED_I2C
i2cReleaseBus((devp)->config->i2cp);
#endif /* BMP085_SHARED_I2C. */
#endif /* BMP085_USE_I2C. */
if(devp->state != BMP085_READY)
devp->state = BMP085_READY;
}
/**
* @brief Deactivates the BMP085 Complex Driver peripheral.
*
* @param[in] devp pointer to the @p BMP085Driver object
*
* @api
*/
void bmp085Stop(BMP085Driver *devp) {
osalDbgCheck(devp != NULL);
osalDbgAssert((devp->state == BMP085_STOP) ||
(devp->state == BMP085_READY),
"bmp085Stop(), invalid state");
#if (BMP085_USE_I2C)
if (devp->state == BMP085_STOP) {
#if BMP085_SHARED_I2C
i2cAcquireBus((devp)->config->i2cp);
i2cStart((devp)->config->i2cp, (devp)->config->i2ccfg);
#endif /* BMP085_SHARED_I2C. */
#if BMP085_SHARED_I2C
i2cReleaseBus((devp)->config->i2cp);
#endif /* BMP085_SHARED_I2C. */
}
#endif /* BMP085_USE_I2C. */
if (devp->state != BMP085_STOP)
devp->state = BMP085_STOP;
}
/** @} */