keyboard/qmk/lib/chibios-contrib/testhal/STM32/STM32F3xx/OPAMP/main.c

133 lines
4.5 KiB
C

/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "ch.h"
#include "hal.h"
#define DAC_BUFFER_SIZE 360
/*
* DAC test buffer (sine wave).
*/
static const dacsample_t dac_buffer[DAC_BUFFER_SIZE] = {
2047, 2082, 2118, 2154, 2189, 2225, 2260, 2296, 2331, 2367, 2402, 2437,
2472, 2507, 2542, 2576, 2611, 2645, 2679, 2713, 2747, 2780, 2813, 2846,
2879, 2912, 2944, 2976, 3008, 3039, 3070, 3101, 3131, 3161, 3191, 3221,
3250, 3278, 3307, 3335, 3362, 3389, 3416, 3443, 3468, 3494, 3519, 3544,
3568, 3591, 3615, 3637, 3660, 3681, 3703, 3723, 3744, 3763, 3782, 3801,
3819, 3837, 3854, 3870, 3886, 3902, 3917, 3931, 3944, 3958, 3970, 3982,
3993, 4004, 4014, 4024, 4033, 4041, 4049, 4056, 4062, 4068, 4074, 4078,
4082, 4086, 4089, 4091, 4092, 4093, 4094, 4093, 4092, 4091, 4089, 4086,
4082, 4078, 4074, 4068, 4062, 4056, 4049, 4041, 4033, 4024, 4014, 4004,
3993, 3982, 3970, 3958, 3944, 3931, 3917, 3902, 3886, 3870, 3854, 3837,
3819, 3801, 3782, 3763, 3744, 3723, 3703, 3681, 3660, 3637, 3615, 3591,
3568, 3544, 3519, 3494, 3468, 3443, 3416, 3389, 3362, 3335, 3307, 3278,
3250, 3221, 3191, 3161, 3131, 3101, 3070, 3039, 3008, 2976, 2944, 2912,
2879, 2846, 2813, 2780, 2747, 2713, 2679, 2645, 2611, 2576, 2542, 2507,
2472, 2437, 2402, 2367, 2331, 2296, 2260, 2225, 2189, 2154, 2118, 2082,
2047, 2012, 1976, 1940, 1905, 1869, 1834, 1798, 1763, 1727, 1692, 1657,
1622, 1587, 1552, 1518, 1483, 1449, 1415, 1381, 1347, 1314, 1281, 1248,
1215, 1182, 1150, 1118, 1086, 1055, 1024, 993, 963, 933, 903, 873,
844, 816, 787, 759, 732, 705, 678, 651, 626, 600, 575, 550,
526, 503, 479, 457, 434, 413, 391, 371, 350, 331, 312, 293,
275, 257, 240, 224, 208, 192, 177, 163, 150, 136, 124, 112,
101, 90, 80, 70, 61, 53, 45, 38, 32, 26, 20, 16,
12, 8, 5, 3, 2, 1, 0, 1, 2, 3, 5, 8,
12, 16, 20, 26, 32, 38, 45, 53, 61, 70, 80, 90,
101, 112, 124, 136, 150, 163, 177, 192, 208, 224, 240, 257,
275, 293, 312, 331, 350, 371, 391, 413, 434, 457, 479, 503,
526, 550, 575, 600, 626, 651, 678, 705, 732, 759, 787, 816,
844, 873, 903, 933, 963, 993, 1024, 1055, 1086, 1118, 1150, 1182,
1215, 1248, 1281, 1314, 1347, 1381, 1415, 1449, 1483, 1518, 1552, 1587,
1622, 1657, 1692, 1727, 1763, 1798, 1834, 1869, 1905, 1940, 1976, 2012
};
static const DACConfig dac1cfg1 = {
.init = 2047U,
.datamode = DAC_DHRM_12BIT_RIGHT,
.cr = 0
};
static const DACConversionGroup dacgrpcfg1 = {
.num_channels = 1U,
.end_cb = NULL,
.error_cb = NULL,
.trigger = DAC_TRG(0)
};
/*
* GPT6 configuration.
*/
static const GPTConfig gpt6cfg1 = {
.frequency = 10000U,
.callback = NULL,
.cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */
.dier = 0U
};
/*
* OpAmp configuration.
* We will double the input voltage
*/
static const OPAMPConfig opamp1_conf = {
OPAMP1_CSR_VPSEL_PA01 | // INP connectd to PA1
OPAMP1_CSR_VMSEL_PGA | // INM connected to PGA
OPAMPx_CSR_PGAGAIN_x2 | // Gain of 2x
OPAMPx_CSR_PGACONNECT_GROUND // PGA connected to ground
};
/*
* Application entry point.
*/
int main(void) {
halInit();
chSysInit();
/*
* Set PA3 - PA1 to Analog (DAC1_CH1, OPAMP1_INP)
* You will have to connect these with a jumper wire
*/
palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_ANALOG);
palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_ANALOG);
/*
* Start peripherals
*/
dacStart(&DACD1, &dac1cfg1);
opampStart(&OPAMPD1, &opamp1_conf);
gptStart(&GPTD6, &gpt6cfg1);
/*
* Starting a continuous conversion.
*/
dacStartConversion(&DACD1, &dacgrpcfg1, dac_buffer, DAC_BUFFER_SIZE);
gptStartContinuous(&GPTD6, 2U);
opampEnable(&OPAMPD1);
opampCalibrate();
/*
* Normal main() thread activity.
*/
while (true) {
chThdSleepMilliseconds(250);
palToggleLine(LINE_LED3_RED);
}
return 0;
}