keyboard/qmk/keyboards/rgbkb/zygomorph
2020-12-25 15:21:40 -05:00
..
common Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
keymaps Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
rev1 Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
config.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.md Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
rules.mk Update qmk sources 2020-12-25 15:21:40 -05:00
zygomorph.c Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
zygomorph.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

Zygomorph

Zygomorph

Zygomorph is the thinnest keyboard with a fully enclosed case. It's only 3.2mm thick below the switches, including screws. It can be used in 5x6 and 4x6 split, or 5x12 and 4x12 combined. It has per-key RGB, supports Kailh Choc and MX switches, and has 10 rotary encoder positions per half (only one can be used per half). The board has pre-soldered components, including type C ports and ATmega32U4. The build guide can be found here.

Keyboard Maintainer: Legonut
Hardware Supported: Zygomorph R1.0
Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/zygomorph:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.