keyboard/qmk/keyboards/peiorisboards/ixora
2020-12-25 15:21:40 -05:00
..
keymaps Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
chconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
config.h Update qmk sources 2020-12-25 15:21:40 -05:00
halconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
info.json Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
ixora.c Update qmk sources 2020-12-25 15:21:40 -05:00
ixora.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
mcuconf.h Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
readme.md Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00
rules.mk Add back qmk firmware that's been updated for kemonine setups 2020-09-24 23:24:14 -04:00

Ixora

Ixora

Ixora is an ARM-powered 6-key macropad with a USB connector, hotswap sockets, and indicator LEDs.

Keyboard Maintainer: Peioris
Hardware Supported: Ixora PCB
Hardware Availability: Peioris

Make example for this keyboard (after setting up your build environment):

make peiorisboards/ixora:default:dfu-util

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).