History

kemonine f7a73edb1f Add back qmk firmware that's been updated for kemonine setups		2020-09-24 23:24:14 -04:00
..
config.h	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
info.json	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
readme.md	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
rev2.c	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
rev2.h	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00
rules.mk	Add back qmk firmware that's been updated for kemonine setups	2020-09-24 23:24:14 -04:00

readme.md

Atom47 rev2

This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has modified his and put a big spacebar in it.

Support

Keyboard Maintainer: Matthew Kerfoot
Hardware Supported: Atom47 rev2
Hardware Availability: None

Features

QMK Firmware
In-switch leds
Through-hole micro usb connector (less likely to break off!)
Easily reachable reset button under the spacebar
In-switch CapsLock indicator

Build

To build the default keymap, simply run make atom47/rev2:default.

For an alternative, heavily modified layout you would just need to run make atom47/rev2:LEdiodes.

See build environment setup then the make instructions for more information.