# Uncomment to enable encoder
# CONFIG_EC11=y
# CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y

# Enable underglow
CONFIG_ZMK_RGB_UNDERGLOW=y
# Use the STRIP config specific to the LEDs you're using
CONFIG_WS2812_STRIP=y

# Set default underglow values
CONFIG_ZMK_RGB_UNDERGLOW_HUE_START=25
CONFIG_ZMK_RGB_UNDERGLOW_SAT_START=100
CONFIG_ZMK_RGB_UNDERGLOW_BRT_START=5

# Uncomment the following line to enable the Lily58 OLED Display
CONFIG_ZMK_DISPLAY=y

# Set screen blanking to 15s instead of 30s
CONFIG_ZMK_IDLE_TIMEOUT=15000

# Save settings after 10s instaed of 60s
#CONFIG_ZMK_SETTINGS_SAVE_DEBOUNCE=10000

################################################################################
# Debugging
################################################################################

# Turn on logging, and set ZMK logging to debug output
CONFIG_LOG=y
CONFIG_ZMK_LOG_LEVEL_DBG=y

# Turn on USB CDC ACM device
CONFIG_USB=y
CONFIG_USB_DEVICE_STACK=y
CONFIG_USB_CDC_ACM=y
CONFIG_USB_CDC_ACM_RINGBUF_SIZE=1024
CONFIG_USB_CDC_ACM_DEVICE_NAME="CDC_ACM"
CONFIG_USB_CDC_ACM_DEVICE_COUNT=1

# Enable serial console
CONFIG_SERIAL=y
CONFIG_CONSOLE=y
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_UART_LINE_CTRL=y

# Enable USB UART, and set the console device
CONFIG_UART_CONSOLE=y
CONFIG_USB_UART_CONSOLE=y
CONFIG_UART_CONSOLE_ON_DEV_NAME="CDC_ACM_0"

# Sensor logging
CONFIG_SENSOR_LOG_LEVEL_DBG=y
#CONFIG_SENSOR_LOG_LEVEL=4
CONFIG_SENSOR_INIT_PRIORITY=90