Cleanup tg4x keymap ; set lily underglow led strip length ; tweak notes/readme

keyboards/zmk-config/README.md

@@ -12,7 +12,11 @@ west build --board nrf52840_mdk_dongle -d build/mdk_dongle -- -DSHIELD=mdk_dongl
 
 west build --board nice_nano -d build/tidbit -- -DSHIELD=tidbit -DZMK_CONFIG=/workspaces/zmk-config/keyboards/zmk-config/config
 
-west build --board nice_nano -d build/pockettype -- -DSHIELD=pockettype -DZMK_CONFIG=/workspaces/zmk-config/keyboards/zmk-config/config
+west build --board nice_nano -d build/pockettype/default -- -DSHIELD=pockettype -DZMK_CONFIG=/workspaces/zmk-config/keyboards/zmk-config/config
+
+west build --board nrf52840_mdk_dongle -d build/pockettype/central -- -DSHIELD=pockettype_central -DZMK_CONFIG=/workspaces/zmk-config/keyboards/zmk-config/config
+
+west build --board nice_nano -d build/pockettype/peripheral -- -DSHIELD=pockettype_peripheral -DZMK_CONFIG=/workspaces/zmk-config/keyboards/zmk-config/config
 
 west build --board nice_nano -d build/tg4x -- -DSHIELD=tg4x -DZMK_CONFIG=/workspaces/zmk-config/keyboards/zmk-config/config
 

keyboards/zmk-config/config/lily58.keymap

@@ -9,6 +9,10 @@
 #include <dt-bindings/zmk/bt.h>
 #include <dt-bindings/zmk/ext_power.h>
 
+&led_strip {
+    chain-length = <1>;
+};
+
 / {
 	keymap {
 		compatible = "zmk,keymap";

keyboards/zmk-config/config/tg4x.conf

@@ -0,0 +1,43 @@
+# Copyright (c) 2020 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+# Number of BT Profiles
+CONFIG_BT_MAX_CONN=6
+
+# Set screen blanking to 15s instead of 30s
+CONFIG_ZMK_IDLE_TIMEOUT=15000
+
+# Save settings after 10s instaed of 60s
+#CONFIG_ZMK_SETTINGS_SAVE_DEBOUNCE=10000
+
+################################################################################
+# Debugging
+################################################################################
+
+# Turn on logging, and set ZMK logging to debug output
+CONFIG_LOG=y
+CONFIG_ZMK_LOG_LEVEL_DBG=y
+
+# Turn on USB CDC ACM device
+CONFIG_USB=y
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_CDC_ACM=y
+CONFIG_USB_CDC_ACM_RINGBUF_SIZE=1024
+CONFIG_USB_CDC_ACM_DEVICE_NAME="CDC_ACM"
+CONFIG_USB_CDC_ACM_DEVICE_COUNT=1
+
+# Enable serial console
+CONFIG_SERIAL=y
+CONFIG_CONSOLE=y
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_UART_LINE_CTRL=y
+
+# Enable USB UART, and set the console device
+CONFIG_UART_CONSOLE=y
+CONFIG_USB_UART_CONSOLE=y
+CONFIG_UART_CONSOLE_ON_DEV_NAME="CDC_ACM_0"
+
+# Sensor logging
+CONFIG_SENSOR_LOG_LEVEL_DBG=y
+#CONFIG_SENSOR_LOG_LEVEL=4
+CONFIG_SENSOR_INIT_PRIORITY=90

keyboards/zmk-config/config/tg4x.keymap

@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <behaviors.dtsi>
+#include <dt-bindings/zmk/keys.h>
+#include <dt-bindings/zmk/bt.h>
+
+&led_strip {
+    chain-length = <1>;
+};
+
+/ {
+	behaviors {
+		ht: hold_tap {
+			compatible = "zmk,behavior-hold-tap";
+			label = "Hold Tap";
+			#binding-cells = <2>;
+			tapping_term_ms = <200>;
+			flavor = "tap-preferred";
+			bindings = <&kp>, <&kp>;
+		};
+	};
+
+	keymap {
+		compatible = "zmk,keymap";
+
+		default_layer {
+			bindings = <
+&kp ESC      &kp Q    &kp W    &kp E &kp R &kp T &kp Y     &kp U &kp I     &kp O    &kp P    &none &kp BSPC
+&ht CAPS TAB &kp A    &kp S    &kp D &kp F &kp G &kp H     &kp J &kp K     &kp L    &kp SEMI       &kp RET
+&kp LSHFT    &kp Z    &kp X    &kp C &kp V &kp B &kp N     &kp M &kp COMMA &kp DOT                 &kp RSHFT
+&kp LCTRL    &kp LGUI &kp LALT &mo 2             &kp SPACE &mo 1 &kp RALT  &kp RGUI                &kp RCTRL
+			>;
+		};
+
+		function_layer {
+			bindings = <
+&kp GRAVE &kp N1   &kp N2    &kp N3   &kp N4   &kp N5 &kp N6   &kp N7    &kp N8    &kp N9    &kp N0   &none &kp DEL
+&none     &kp HOME &kp PG_UP &kp LBKT &kp RBKT &trans &trans   &kp MINUS &kp EQUAL &kp BSLH  &kp FSLH       &kp APOS
+&trans    &kp END  &kp PG_DN &trans   &trans &trans   &trans   &trans    &trans    &kp UP                   &trans
+&trans    &trans   &trans    &trans                            &trans    &trans    &kp LEFT  &kp DOWN       &kp RIGHT
+			>;
+		};
+
+		other_layer {
+			bindings = <
+&kp F1 &kp F2     &kp F3     &kp F4 &kp F5 &kp F6 &kp F7 &kp F8       &kp F9       &kp F10    &kp F11 &none &kp F12
+&trans &trans     &trans     &trans     &trans &trans &trans &trans &trans       &trans       &trans        &kp INSERT
+&trans &bt BT_CLR &bt BT_PRV &bt BT_NXT &trans &trans &trans &trans &bootloader  &reset                     &kp PRINTSCREEN
+&trans &trans     &trans     &trans                          &trans &kp C_VOL_UP &kp C_VOL_DN               &kp C_PP
+			>;
+		};
+
+	};
+};

keyboards/zmk-config/notes.md

@@ -1,7 +1,3 @@
-# User Behaviors
-
-Needs documentation, see pockettype and mdk dongle for ideas -- specifically the LED code and CMakeLists.txt
-
 # LEDs
 
 Generic behavior for led on/off via gpio (see pocket type / mdk personal sources for ideas)
@@ -37,20 +33,6 @@ Per Pete Johnson : Mostly build tweaks
 
 Submit to upstream zephyr
 
-## Dongles
-
-- Remove need to have kscan defined for the dongle portion of a build
-- Setup user buttons via user code to trip boot loader / other things
-	- Can do `zmk-config/config/boards/shields/CMakeLists.txt`
-- Setup dedicated mdk dongle shield
-- Remove local tg4x / pockettype dongle configs
-- Part of readme shows the necessary conf tweaks/items that need to be added to zmk-config for a board
-
-## 40%
-
-- Reconcile against main zmk repo and submit appropriate PRs
-- Figure out underglow
-
 ## Tidbit
 
 - Setup to use oled same way as original