keyboard/qmk/lib/chibios/os/ex/ST/lps22hb.h

725 lines
24 KiB
C
Raw Normal View History

/*
ChibiOS - Copyright (C) 2016..2018 Rocco Marco Guglielmi
This file is part of ChibiOS.
ChibiOS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file lps22hb.h
* @brief LPS22HB MEMS interface module header.
*
* @addtogroup LPS22HB
* @ingroup EX_ST
* @{
*/
#ifndef _LPS22HB_H_
#define _LPS22HB_H_
#include "hal_barometer.h"
#include "hal_thermometer.h"
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @name Version identification
* @{
*/
/**
* @brief LPS22HB driver version string.
*/
#define EX_LPS22HB_VERSION "1.0.2"
/**
* @brief LPS22HB driver version major number.
*/
#define EX_LPS22HB_MAJOR 1
/**
* @brief LPS22HB driver version minor number.
*/
#define EX_LPS22HB_MINOR 0
/**
* @brief LPS22HB driver version patch number.
*/
#define EX_LPS22HB_PATCH 2
/** @} */
/**
* @brief LPS22HB barometer subsystem characteristics.
* @note Sensitivity is expressed as hPa/LSB whereas hPa stand for
* hectopascal.
* @note Bias is expressed as hPa.
*
* @{
*/
#define LPS22HB_BARO_NUMBER_OF_AXES 1U
#define LPS22HB_BARO_SENS 0.00024414f
#define LPS22HB_BARO_BIAS 0.0f
/** @} */
/**
* @brief LPS22HB thermometer subsystem characteristics.
* @note Sensitivity is expressed as <EFBFBD>C/LSB.
* @note Bias is expressed as <EFBFBD>C.
*
* @{
*/
#define LPS22HB_THERMO_NUMBER_OF_AXES 1U
#define LPS22HB_THERMO_SENS 0.01f
#define LPS22HB_THERMO_BIAS 0.0f
/** @} */
/**
* @name LPS22HB communication interfaces related bit masks
* @{
*/
#define LPS22HB_DI_MASK 0xFF
#define LPS22HB_DI(n) (1 << n)
#define LPS22HB_AD_MASK 0x3F
#define LPS22HB_AD(n) (1 << n)
#define LPS22HB_MS (1 << 6)
#define LPS22HB_RW (1 << 7)
#define LPS22HB_SUB_MS (1 << 7)
/** @} */
/**
* @name LPS22HB register addresses
* @{
*/
#define LPS22HB_AD_INT_CFG 0x0B
#define LPS22HB_AD_THS_P_L 0x0C
#define LPS22HB_AD_THS_P_H 0x0D
#define LPS22HB_AD_WHO_AM_I 0x0F
#define LPS22HB_AD_CTRL_REG1 0x10
#define LPS22HB_AD_CTRL_REG2 0x11
#define LPS22HB_AD_CTRL_REG3 0x12
#define LPS22HB_AD_FIFO_CTRL 0x14
#define LPS22HB_AD_REF_P_XL 0x15
#define LPS22HB_AD_REF_P_L 0x16
#define LPS22HB_AD_REF_P_H 0x17
#define LPS22HB_AD_RPDS_L 0x18
#define LPS22HB_AD_RPDS_H 0x19
#define LPS22HB_AD_RES_CONF 0x1A
#define LPS22HB_AD_INT_SRC 0x25
#define LPS22HB_AD_FIFO_SRC 0x26
#define LPS22HB_AD_STATUS_REG 0x27
#define LPS22HB_AD_PRESS_OUT_XL 0x28
#define LPS22HB_AD_PRESS_OUT_L 0x29
#define LPS22HB_AD_PRESS_OUT_H 0x2A
#define LPS22HB_AD_TEMP_OUT_L 0x2B
#define LPS22HB_AD_TEMP_OUT_H 0x2C
#define LPS22HB_AD_LPFP_RES 0x33
/** @} */
/**
* @name LPS22HB_INT_CFG register bits definitions
* @{
*/
#define LPS22HB_INT_CFG_MASK 0xFF
#define LPS22HB_INT_CFG_PHE (1 << 0)
#define LPS22HB_INT_CFG_PLE (1 << 1)
#define LPS22HB_INT_CFG_LIR (1 << 2)
#define LPS22HB_INT_CFG_DIFF_EN (1 << 3)
#define LPS22HB_INT_CFG_RESET_AZ (1 << 4)
#define LPS22HB_INT_CFG_AUTOZERO (1 << 5)
#define LPS22HB_INT_CFG_RESET_ARP (1 << 6)
#define LPS22HB_INT_CFG_AUTORIFP (1 << 7)
/** @} */
/**
* @name LPS22HB_CTRL_REG1 register bits definitions
* @{
*/
#define LPS22HB_CTRL_REG1_MASK 0x7F
#define LPS22HB_CTRL_REG1_SIM (1 << 0)
#define LPS22HB_CTRL_REG1_BDU (1 << 1)
#define LPS22HB_CTRL_REG1_LPFP_CFG (1 << 2)
#define LPS22HB_CTRL_REG1_LPFP_EN (1 << 3)
#define LPS22HB_CTRL_REG1_ODR0 (1 << 4)
#define LPS22HB_CTRL_REG1_ODR1 (1 << 5)
#define LPS22HB_CTRL_REG1_ODR2 (1 << 6)
/** @} */
/**
* @name LPS22HB_CTRL_REG2 register bits definitions
* @{
*/
#define LPS22HB_CTRL_REG2_MASK 0xFD
#define LPS22HB_CTRL_REG2_ONE_SHOT (1 << 0)
#define LPS22HB_CTRL_REG2_SWRESET (1 << 2)
#define LPS22HB_CTRL_REG2_I2C_DIS (1 << 3)
#define LPS22HB_CTRL_REG2_IF_ADD_INC (1 << 4)
#define LPS22HB_CTRL_REG2_STOP_ON_FTH (1 << 5)
#define LPS22HB_CTRL_REG2_FIFO_EN (1 << 6)
#define LPS22HB_CTRL_REG2_BOOT (1 << 7)
/** @} */
/**
* @name LPS22HB_CTRL_REG3 register bits definitions
* @{
*/
#define LPS22HB_CTRL_REG3_MASK 0xFF
#define LPS22HB_CTRL_REG3_INT_S1 (1 << 0)
#define LPS22HB_CTRL_REG3_INT_S2 (1 << 1)
#define LPS22HB_CTRL_REG3_DRDY (1 << 2)
#define LPS22HB_CTRL_REG3_F_OVR (1 << 3)
#define LPS22HB_CTRL_REG3_F_FTH (1 << 4)
#define LPS22HB_CTRL_REG3_F_FSS5 (1 << 5)
#define LPS22HB_CTRL_REG3_PP_OD (1 << 6)
#define LPS22HB_CTRL_REG3_INT_H_L (1 << 7)
/** @} */
/**
* @name LPS22HB_INT_SRC register bits definitions
* @{
*/
#define LPS22HB_INT_SRC_MASK 0x87
#define LPS22HB_INT_SRC_PH (1 << 0)
#define LPS22HB_INT_SRC_PL (1 << 1)
#define LPS22HB_INT_SRC_IA (1 << 2)
#define LPS22HB_INT_SRC_BOOT_STATUS (1 << 8)
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief LPS22HB SPI interface switch.
* @details If set to @p TRUE the support for SPI is included.
* @note The default is @p FALSE.
*/
#if !defined(LPS22HB_USE_SPI) || defined(__DOXYGEN__)
#define LPS22HB_USE_SPI FALSE
#endif
/**
* @brief LPS22HB shared SPI switch.
* @details If set to @p TRUE the device acquires SPI bus ownership
* on each transaction.
* @note The default is @p FALSE. Requires SPI_USE_MUTUAL_EXCLUSION.
*/
#if !defined(LPS22HB_SHARED_SPI) || defined(__DOXYGEN__)
#define LPS22HB_SHARED_SPI FALSE
#endif
/**
* @brief LPS22HB I2C interface switch.
* @details If set to @p TRUE the support for I2C is included.
* @note The default is @p TRUE.
*/
#if !defined(LPS22HB_USE_I2C) || defined(__DOXYGEN__)
#define LPS22HB_USE_I2C TRUE
#endif
/**
* @brief LPS22HB shared I2C switch.
* @details If set to @p TRUE the device acquires I2C bus ownership
* on each transaction.
* @note The default is @p FALSE. Requires I2C_USE_MUTUAL_EXCLUSION.
*/
#if !defined(LPS22HB_SHARED_I2C) || defined(__DOXYGEN__)
#define LPS22HB_SHARED_I2C FALSE
#endif
/**
* @brief LPS22HB advanced configurations switch.
* @details If set to @p TRUE more configurations are available.
* @note The default is @p FALSE.
*/
#if !defined(LPS22HB_USE_ADVANCED) || defined(__DOXYGEN__)
#define LPS22HB_USE_ADVANCED FALSE
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if !(LPS22HB_USE_SPI ^ LPS22HB_USE_I2C)
#error "LPS22HB_USE_SPI and LPS22HB_USE_I2C cannot be both true or both false"
#endif
#if LPS22HB_USE_SPI && !HAL_USE_SPI
#error "LPS22HB_USE_SPI requires HAL_USE_SPI"
#endif
#if LPS22HB_SHARED_SPI && !SPI_USE_MUTUAL_EXCLUSION
#error "LPS22HB_SHARED_SPI requires SPI_USE_MUTUAL_EXCLUSION"
#endif
#if LPS22HB_USE_I2C && !HAL_USE_I2C
#error "LPS22HB_USE_I2C requires HAL_USE_I2C"
#endif
#if LPS22HB_SHARED_I2C && !I2C_USE_MUTUAL_EXCLUSION
#error "LPS22HB_SHARED_I2C requires I2C_USE_MUTUAL_EXCLUSION"
#endif
/**
* @todo Add support for LPS22HB over SPI.
*/
#if LPS22HB_USE_SPI
#error "LPS22HB over SPI still not supported"
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @name LPS22HB data structures and types.
* @{
*/
/**
* @brief Structure representing a LPS22HB driver.
*/
typedef struct LPS22HBDriver LPS22HBDriver;
/**
* @brief LPS22HB slave address
*/
typedef enum {
LPS22HB_SAD_GND = 0x5C, /**< Slave Address when SA0 is to GND */
LPS22HB_SAD_VCC = 0x5D /**< Slave Address when SA0 is to VCC */
}lps22hb_sad_t;
/**
* @brief LPS22HB output data rate and bandwidth.
*/
typedef enum {
LPS22HB_ODR_PD = 0x00, /**< Power down. */
LPS22HB_ODR_1HZ = 0x10, /**< Output data rate 1 Hz. */
LPS22HB_ODR_10HZ = 0x20, /**< Output data rate 10 Hz. */
LPS22HB_ODR_25HZ = 0x30, /**< Output data rate 25 Hz. */
LPS22HB_ODR_50HZ = 0x40, /**< Output data rate 50 Hz. */
LPS22HB_ODR_75HZ = 0x50 /**< Output data rate 75 Hz. */
}lps22hb_odr_t;
/**
* @brief LPS22HB pressure resolution.
*/
typedef enum {
LPS22HB_LP_DISABLED = 0x00, /**< LP Filter disabled. */
LPS22HB_LP_ODR_9 = 0x08, /**< LP Filter enabled. Cut-off ORD/9. */
LPS22HB_LP_ODR_20 = 0x0C /**< LP Filter enabled. Cut-off ORD/20. */
}lps22hb_lp_t;
/**
* @brief LPS22HB block data update.
*/
typedef enum {
LPS22HB_BDU_CONTINUOUS = 0x00, /**< Block data continuously updated. */
LPS22HB_BDU_BLOCKED = 0x40 /**< Block data updated after reading. */
}lps22hb_bdu_t;
/**
* @brief Driver state machine possible states.
*/
typedef enum {
LPS22HB_UNINIT = 0, /**< Not initialized. */
LPS22HB_STOP = 1, /**< Stopped. */
LPS22HB_READY = 2, /**< Ready. */
} lps22hb_state_t;
/**
* @brief LPS22HB configuration structure.
*/
typedef struct {
#if LPS22HB_USE_SPI || defined(__DOXYGEN__)
/**
* @brief SPI driver associated to this LPS22HB.
*/
SPIDriver *spip;
/**
* @brief SPI configuration associated to this LPS22HB.
*/
const SPIConfig *spicfg;
#endif /* LPS22HB_USE_SPI */
#if LPS22HB_USE_I2C || defined(__DOXYGEN__)
/**
* @brief I2C driver associated to this LPS22HB.
*/
I2CDriver *i2cp;
/**
* @brief I2C configuration associated to this LPS22HB.
*/
const I2CConfig *i2ccfg;
/**
* @brief LPS22HB slave address
*/
lps22hb_sad_t slaveaddress;
#endif /* LPS22HB_USE_I2C */
/**
* @brief LPS22HB barometer subsystem initial sensitivity.
*/
float *barosensitivity;
/**
* @brief LPS22HB barometer subsystem initial bias.
*/
float *barobias;
/**
* @brief LPS22HB thermometer subsystem initial sensitivity.
*/
float *thermosensitivity;
/**
* @brief LPS22HB thermometer subsystem initial bias.
*/
float *thermobias;
/**
* @brief LPS22HB output data rate selection.
*/
lps22hb_odr_t outputdatarate;
#if LPS22HB_USE_ADVANCED || defined(__DOXYGEN__)
/**
* @brief LPS22HB block data update.
*/
lps22hb_bdu_t blockdataupdate;
/**
* @brief LPS22HB barometer subsystem resolution.
*/
lps22hb_lp_t lowpass_filter;
#endif
} LPS22HBConfig;
/**
* @brief @p LPS22HB specific methods.
* @note No methods so far, just a common ancestor interface.
*/
#define _lps22hb_methods_alone
/**
* @brief @p LPS22HB specific methods with inherited ones.
*/
#define _lps22hb_methods \
_base_object_methods \
_lps22hb_methods_alone
/**
* @extends BaseObjectVMT
*
* @brief @p LPS22HB virtual methods table.
*/
struct LPS22HBVMT {
_lps22hb_methods
};
/**
* @brief @p LPS22HBDriver specific data.
*/
#define _lps22hb_data \
/* Driver state.*/ \
lps22hb_state_t state; \
/* Current configuration data.*/ \
const LPS22HBConfig *config; \
/* Barometer subsystem axes number.*/ \
size_t baroaxes; \
/* Barometer subsystem current sensitivity.*/ \
float barosensitivity; \
/* Barometer subsystem current bias .*/ \
float barobias; \
/* Thermometer subsystem axes number.*/ \
size_t thermoaxes; \
/* Thermometer subsystem current sensitivity.*/ \
float thermosensitivity; \
/* Thermometer subsystem current bias.*/ \
float thermobias;
/**
* @brief LPS22HB 2-axis barometer/thermometer class.
*/
struct LPS22HBDriver {
/** @brief Virtual Methods Table.*/
const struct LPS22HBVMT *vmt;
/** @brief Base barometer interface.*/
BaseBarometer baro_if;
/** @brief Base thermometer interface.*/
BaseThermometer thermo_if;
_lps22hb_data
};
/** @} */
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @brief Return the number of axes of the BaseBarometer.
*
* @param[in] devp pointer to @p LPS22HBDriver.
*
* @return the number of axes.
*
* @api
*/
#define lps22hbBarometerGetAxesNumber(devp) \
barometerGetAxesNumber(&((devp)->baro_if))
/**
* @brief Retrieves raw data from the BaseBarometer.
* @note This data is retrieved from MEMS register without any algebraical
* manipulation.
* @note The axes array must be at least the same size of the
* BaseBarometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[out] axes a buffer which would be filled with raw data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*
* @api
*/
#define lps22hbBarometerReadRaw(devp, axes) \
barometerReadRaw(&((devp)->baro_if), axes)
/**
* @brief Retrieves cooked data from the BaseBarometer.
* @note This data is manipulated according to the formula
* cooked = (raw * sensitivity) - bias.
* @note Final data is expressed as hPa.
* @note The axes array must be at least the same size of the
* BaseBarometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[out] axes a buffer which would be filled with cooked data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*
* @api
*/
#define lps22hbBarometerReadCooked(devp, axes) \
barometerReadCooked(&((devp)->baro_if), axes)
/**
* @brief Set bias values for the BaseBarometer.
* @note Bias must be expressed as hPa.
* @note The bias buffer must be at least the same size of the
* BaseBarometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[in] bp a buffer which contains biases.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbBarometerSetBias(devp, bp) \
barometerSetBias(&((devp)->baro_if), bp)
/**
* @brief Reset bias values for the BaseBarometer.
* @note Default biases value are obtained from device datasheet when
* available otherwise they are considered zero.
*
* @param[in] devp pointer to @p LPS22HBDriver.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbBarometerResetBias(devp) \
barometerResetBias(&((devp)->baro_if))
/**
* @brief Set sensitivity values for the BaseBarometer.
* @note Sensitivity must be expressed as hPa/LSB.
* @note The sensitivity buffer must be at least the same size of the
* BaseBarometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[in] sp a buffer which contains sensitivities.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbBarometerSetSensitivity(devp, sp) \
barometerSetSensitivity(&((devp)->baro_if), sp)
/**
* @brief Reset sensitivity values for the BaseBarometer.
* @note Default sensitivities value are obtained from device datasheet.
*
* @param[in] devp pointer to @p LPS22HBDriver.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbBarometerResetSensitivity(devp) \
barometerResetSensitivity(&((devp)->baro_if))
/**
* @brief Return the number of axes of the BaseThermometer.
*
* @param[in] devp pointer to @p LPS22HBDriver.
*
* @return the number of axes.
*
* @api
*/
#define lps22hbThermometerGetAxesNumber(devp) \
thermometerGetAxesNumber(&((devp)->thermo_if))
/**
* @brief Retrieves raw data from the BaseThermometer.
* @note This data is retrieved from MEMS register without any algebraical
* manipulation.
* @note The axes array must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[out] axes a buffer which would be filled with raw data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*
* @api
*/
#define lps22hbThermometerReadRaw(devp, axes) \
thermometerReadRaw(&((devp)->thermo_if), axes)
/**
* @brief Retrieves cooked data from the BaseThermometer.
* @note This data is manipulated according to the formula
* cooked = (raw * sensitivity) - bias.
* @note Final data is expressed as °C.
* @note The axes array must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[out] axes a buffer which would be filled with cooked data.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
* @retval MSG_RESET if one or more I2C errors occurred, the errors can
* be retrieved using @p i2cGetErrors().
* @retval MSG_TIMEOUT if a timeout occurred before operation end.
*
* @api
*/
#define lps22hbThermometerReadCooked(devp, axes) \
thermometerReadCooked(&((devp)->thermo_if), axes)
/**
* @brief Set bias values for the BaseThermometer.
* @note Bias must be expressed as °C.
* @note The bias buffer must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[in] bp a buffer which contains biases.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbThermometerSetBias(devp, bp) \
thermometerSetBias(&((devp)->thermo_if), bp)
/**
* @brief Reset bias values for the BaseThermometer.
* @note Default biases value are obtained from device datasheet when
* available otherwise they are considered zero.
*
* @param[in] devp pointer to @p LPS22HBDriver.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbThermometerResetBias(devp) \
thermometerResetBias(&((devp)->thermo_if))
/**
* @brief Set sensitivity values for the BaseThermometer.
* @note Sensitivity must be expressed as °C/LSB.
* @note The sensitivity buffer must be at least the same size of the
* BaseThermometer axes number.
*
* @param[in] devp pointer to @p LPS22HBDriver.
* @param[in] sp a buffer which contains sensitivities.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbThermometerSetSensitivity(devp, sp) \
thermometerSetSensitivity(&((devp)->thermo_if), sp)
/**
* @brief Reset sensitivity values for the BaseThermometer.
* @note Default sensitivities value are obtained from device datasheet.
*
* @param[in] devp pointer to @p LPS22HBDriver.
*
* @return The operation status.
* @retval MSG_OK if the function succeeded.
*
* @api
*/
#define lps22hbThermometerResetSensitivity(devp) \
thermometerResetSensitivity(&((devp)->thermo_if))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#ifdef __cplusplus
extern "C" {
#endif
void lps22hbObjectInit(LPS22HBDriver *devp);
void lps22hbStart(LPS22HBDriver *devp, const LPS22HBConfig *config);
void lps22hbStop(LPS22HBDriver *devp);
#ifdef __cplusplus
}
#endif
#endif /* _LPS22HB_H_ */
/** @} */