55 lines
1.9 KiB
Markdown
55 lines
1.9 KiB
Markdown
|
# Let's Split Flashing
|
||
|
|
(More information at `qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md`)
|
||
|
|
## Make the QMK DFU .hex
|
||
|
|
`make lets_split/rev2:wanleg:production dfu=qmk`
|
||
|
|
|
||
|
|
## Burning EEPROM settings and Firmware
|
||
|
|
Navigate to the directory with your .hex file and the `eeprom-lefthand.eep` and `eeprom-righthand.eep` files in it.
|
||
|
|
**Burn Left Side With QMK DFU and Firmware**
|
||
|
|
`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`
|
||
|
|
|
||
|
|
**Burn Right Side With QMK DFU and Firmware**
|
||
|
|
`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`
|
||
|
|
|
||
|
|
Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step.
|
||
|
|
|
||
|
|
## Using QMK DFU
|
||
|
|
Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
|
||
|
|
`make lets_split/rev2:<keymap>:dfu dfu=qmk`
|
||
|
|
The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina`
|
||
|
|
|
||
|
|
# Let's Split LEDs
|
||
|
|
In `qmk_firmware/keyboards/lets_split/rev2/rev2.c`, replace contents with
|
||
|
|
```
|
||
|
|
#include "lets_split.h"
|
||
|
|
|
||
|
|
|
||
|
|
#ifdef SSD1306OLED
|
||
|
|
void led_set_kb(uint8_t usb_led) {
|
||
|
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||
|
|
led_set_user(usb_led);
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
void matrix_init_kb(void) {
|
||
|
|
|
||
|
|
// // green led on
|
||
|
|
// DDRD |= (1<<5);
|
||
|
|
// PORTD &= ~(1<<5);
|
||
|
|
|
||
|
|
// // orange led on
|
||
|
|
// DDRB |= (1<<0);
|
||
|
|
// PORTB &= ~(1<<0);
|
||
|
|
|
||
|
|
//turn off LEDs on ProMicro
|
||
|
|
DDRD &= ~(1<<5);
|
||
|
|
PORTD &= ~(1<<5);
|
||
|
|
|
||
|
|
DDRB &= ~(1<<0);
|
||
|
|
PORTB &= ~(1<<0);
|
||
|
|
|
||
|
|
matrix_init_user();
|
||
|
|
};
|
||
|
|
```
|
||
|
|
to turn off LEDs
|