keyboard/qmk/lib/chibios-contrib/os/hal/include/hal_onewire.h

368 lines
11 KiB
C
Raw Normal View History

/*
ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file hal_onewire.h
* @brief 1-wire Driver macros and structures.
*
* @addtogroup onewire
* @{
*/
#ifndef HAL_ONEWIRE_H_
#define HAL_ONEWIRE_H_
#if (HAL_USE_ONEWIRE == TRUE) || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @brief Enable synthetic test for 'search ROM' procedure.
* @note Only for debugging/testing!
*/
#define ONEWIRE_SYNTH_SEARCH_TEST FALSE
/**
* @brief Aliases for 1-wire protocol.
*/
#define ONEWIRE_CMD_READ_ROM 0x33
#define ONEWIRE_CMD_SEARCH_ROM 0xF0
#define ONEWIRE_CMD_MATCH_ROM 0x55
#define ONEWIRE_CMD_SKIP_ROM 0xCC
#define ONEWIRE_CMD_CONVERT_TEMP 0x44
#define ONEWIRE_CMD_READ_SCRATCHPAD 0xBE
/**
* @brief How many bits will be used for transaction length storage.
*/
#define ONEWIRE_REG_BYTES_WIDTH 16U
/**
* @brief Precalculated maximum transaction length.
*/
#define ONEWIRE_MAX_TRANSACTION_LEN ((1U << ONEWIRE_REG_BYTES_WIDTH) - 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
#if ONEWIRE_SYNTH_SEARCH_TEST && !ONEWIRE_USE_SEARCH_ROM
#error "Synthetic search rom test needs ONEWIRE_USE_SEARCH_ROM"
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if !HAL_USE_PWM
#error "1-wire Driver requires HAL_USE_PWM"
#endif
#if !HAL_USE_PAL
#error "1-wire Driver requires HAL_USE_PAL"
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
#if ONEWIRE_USE_STRONG_PULLUP
/**
* @brief 1-wire strong pull up assert callback type.
*/
typedef void (*onewire_pullup_assert_t)(void);
/**
* @brief 1-wire strong pull up release callback type.
*/
typedef void (*onewire_pullup_release_t)(void);
#endif /* ONEWIRE_USE_STRONG_PULLUP */
/**
* @brief Driver state machine possible states.
*/
typedef enum {
ONEWIRE_UNINIT = 0, /**< Not initialized. */
ONEWIRE_STOP = 1, /**< Stopped. */
ONEWIRE_READY = 2, /**< Ready. */
#if ONEWIRE_USE_STRONG_PULLUP
ONEWIRE_PULL_UP /**< Pull up asserted. */
#endif
} onewire_state_t;
#if ONEWIRE_USE_SEARCH_ROM
/**
* @brief Search ROM procedure possible state.
*/
typedef enum {
ONEWIRE_SEARCH_ROM_SUCCESS = 0, /**< ROM successfully discovered. */
ONEWIRE_SEARCH_ROM_LAST = 1, /**< Last ROM successfully discovered. */
ONEWIRE_SEARCH_ROM_ERROR = 2 /**< Error happened during search. */
} search_rom_result_t;
/**
* @brief Search ROM procedure iteration enum.
*/
typedef enum {
ONEWIRE_SEARCH_ROM_FIRST = 0, /**< First search run. */
ONEWIRE_SEARCH_ROM_NEXT = 1 /**< Next search run. */
} search_iteration_t;
#endif /* ONEWIRE_USE_SEARCH_ROM */
/**
* @brief Driver configuration structure.
*/
typedef struct {
/**
* @brief Pointer to @p PWM driver used for communication.
*/
PWMDriver *pwmd;
/**
* @brief Pointer to configuration structure for underlying PWM driver.
* @note It is NOT constant because 1-wire driver needs to change them
* during normal functioning.
*/
PWMConfig *pwmcfg;
/**
* @brief Active logic level for master channel.
* @details Just set it to @p PWM_OUTPUT_ACTIVE_LOW when 1-wire bus
* connected to direct (not complementary) output of the timer.
* In opposite case you need to check documentation to choose
* correct value.
*/
pwmmode_t pwmmode;
/**
* @brief Number of PWM channel used as master pulse generator.
*/
size_t master_channel;
/**
* @brief Number of PWM channel used as sample interrupt generator.
*/
size_t sample_channel;
/**
* @brief Port Identifier.
* @details This type can be a scalar or some kind of pointer, do not make
* any assumption about it, use the provided macros when populating
* variables of this type.
*/
ioportid_t port;
/**
* @brief Digital I/O port pad.
*/
ioportmask_t pad;
#if defined(STM32F1XX)
/**
* @brief Digital I/O mode for idle bus.
* @details This is a kind of workaround against F1x realization of alternate
* function. Alternate function mode will be activated only
* when you starts appropriate peripheral.
*/
iomode_t pad_mode_idle;
#endif
/**
* @brief Digital I/O mode for active bus.
*/
iomode_t pad_mode_active;
#if ONEWIRE_USE_STRONG_PULLUP
/**
* @brief Pointer to function asserting of strong pull up.
*/
onewire_pullup_assert_t pullup_assert;
/**
* @brief Pointer to function releasing of strong pull up.
*/
onewire_pullup_release_t pullup_release;
#endif
} onewireConfig;
#if ONEWIRE_USE_SEARCH_ROM
/**
* @brief Search ROM registry. Contains small variables used
* in 'search ROM' procedure.
*/
typedef struct {
/**
* @brief Bool flag. True when bus has single slave device.
*/
uint32_t single_device: 1;
/**
* @brief Search iteration (@p search_iteration_t enum).
*/
uint32_t search_iter: 1;
/**
* @brief Result of discovery procedure (@p search_rom_result_t enum).
*/
uint32_t result: 2;
/**
* @brief One of 3 steps of bit discovery.
* @details 0 - direct, 1 - complemented, 2 - generated by master.
*/
uint32_t bit_step: 2;
/**
* @brief Values acquired during bit discovery.
*/
uint32_t bit_buf: 2;
/**
* @brief Currently processing ROM bit.
* @note Must be big enough to store number 64.
*/
uint32_t rombit: 7;
/**
* @brief Total device count discovered on bus.
* @note Maximum 256.
*/
uint32_t devices_found: 8;
} search_rom_reg_t;
/**
* @brief Helper structure for 'search ROM' procedure
*/
typedef struct {
/**
* @brief Search ROM registry.
*/
search_rom_reg_t reg;
/**
* @brief Pointer to buffer with currently discovering ROM
*/
uint8_t *retbuf;
/**
* @brief Previously discovered ROM.
*/
uint8_t prev_path[8];
/**
* @brief Last zero turn branch.
* @note Negative values use to point out of device tree's root.
*/
int8_t last_zero_branch;
/**
* @brief Previous zero turn branch.
* @note Negative values use to point out of device tree's root.
*/
int8_t prev_zero_branch;
} onewire_search_rom_t;
#endif /* ONEWIRE_USE_SEARCH_ROM */
/**
* @brief Onewire registry. Some small variables combined
* in single machine word to save RAM.
*/
typedef struct {
#if ONEWIRE_USE_STRONG_PULLUP
/**
* @brief This flag will be asserted by driver to signalizes
* ISR part when strong pull up needed.
*/
uint32_t need_pullup: 1;
#endif
/**
* @brief Bool flag. If @p true than at least one device presence on bus.
*/
uint32_t slave_present: 1;
/**
* @brief Driver internal state (@p onewire_state_t enum).
*/
uint32_t state: 2;
/**
* @brief Bit number in currently receiving/sending byte.
* @note Must be big enough to store 8.
*/
uint32_t bit: 4;
/**
* @brief Bool flag for premature timer stop prevention.
*/
uint32_t final_timeslot: 1;
/**
* @brief Bytes number to be processing in current transaction.
*/
uint32_t bytes: ONEWIRE_REG_BYTES_WIDTH;
} onewire_reg_t;
/**
* @brief Structure representing an 1-wire driver.
*/
typedef struct {
/**
* @brief Onewire registry.
*/
onewire_reg_t reg;
/**
* @brief Onewire config.
*/
const onewireConfig *config;
/**
* @brief Pointer to I/O data buffer.
*/
uint8_t *buf;
#if ONEWIRE_USE_SEARCH_ROM
/**
* @brief Search ROM helper structure.
*/
onewire_search_rom_t search_rom;
#endif /* ONEWIRE_USE_SEARCH_ROM */
/**
* @brief Thread waiting for I/O completion.
*/
thread_reference_t thread;
} onewireDriver;
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
extern onewireDriver OWD1;
#ifdef __cplusplus
extern "C" {
#endif
void onewireObjectInit(onewireDriver *owp);
void onewireStart(onewireDriver *owp, const onewireConfig *config);
void onewireStop(onewireDriver *owp);
bool onewireReset(onewireDriver *owp);
void onewireRead(onewireDriver *owp, uint8_t *rxbuf, size_t rxbytes);
uint8_t onewireCRC(const uint8_t *buf, size_t len);
void onewireWrite(onewireDriver *owp, uint8_t *txbuf,
size_t txbytes, systime_t pullup_time);
#if ONEWIRE_USE_SEARCH_ROM
size_t onewireSearchRom(onewireDriver *owp,
uint8_t *result, size_t max_rom_cnt);
#endif /* ONEWIRE_USE_SEARCH_ROM */
#if ONEWIRE_SYNTH_SEARCH_TEST
void _synth_ow_write_bit(onewireDriver *owp, ioline_t bit);
ioline_t _synth_ow_read_bit(void);
void synthSearchRomTest(onewireDriver *owp);
#endif /* ONEWIRE_SYNTH_SEARCH_TEST */
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_ONEWIRE */
#endif /* HAL_ONEWIRE_H_ */
/** @} */