keyboard/qmk/keyboards/uzu42/keymaps/default/keymap.c

292 lines
10 KiB
C
Raw Normal View History

#include QMK_KEYBOARD_H
#include "uzu42.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
#ifdef RGBLIGHT_ENABLE
#include <stdio.h>
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_QWERTY = 0,
_LOWER,
_RAISE,
_ADJUST,
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
RGBRST
};
#define KC_CTES CTL_T(KC_ESC)
#define KC_SFSP SFT_T(KC_SPC)
#define KC_ALBS ALT_T(KC_BSPC)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT( \
//,---------------------------------------. ,---------------------------------------.
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH,\
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
KC_LSFT, KC_SPC,KC_LALT,KC_LGUI, LOWER,KC_CTES, KC_SFSP, RAISE,KC_ALBS,KC_RCTL,KC_LGUI,XXXXXXX \
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
),
[_LOWER] = LAYOUT( \
//,---------------------------------------. ,---------------------------------------.
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
KC_TAB,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_LEFT,KC_DOWN, KC_UP,KC_RGHT, KC_ENT,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
KC_LCTL, KC_SPC,KC_LSFT,KC_LALT, KC_DEL, KC_BSPC,KC_HOME, KC_END,XXXXXXX,XXXXXXX,\
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______ \
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
),
[_RAISE] = LAYOUT( \
//,---------------------------------------. ,---------------------------------------.
KC_EXLM, KC_AT,KC_HASH, KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
KC_TAB,KC_UNDS,KC_PLUS,KC_PIPE,KC_TILD, KC_COLN,KC_DQUO, KC_GT,KC_LCBR,KC_RCBR,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
KC_LCTL,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_SCLN,KC_QUOT, KC_LT,KC_LBRC,KC_RBRC,\
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______ \
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
),
[_ADJUST] = LAYOUT( \
//,---------------------------------------. ,---------------------------------------.
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
KC_F11, KC_F12, RESET,KC_PSCR, KC_INS, RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,XXXXXXX,\
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,RGBRST,\
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______ \
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
}
//SSD1306 OLED update loop, make sure to enable OLED_DRIVER_ENABLE=yes in rules.mk
#ifdef OLED_DRIVER_ENABLE
#define L_BASE 0
#define L_LOWER (1 << 1)
#define L_RAISE (1 << 2)
#define L_ADJUST (1 << 3)
#define L_ADJUST_TRI (L_ADJUST | L_RAISE | L_LOWER)
char layer_state_str[24];
const char *read_layer_state(void) {
switch (layer_state)
{
case L_BASE:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default");
break;
case L_RAISE:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
break;
case L_LOWER:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
break;
case L_ADJUST:
case L_ADJUST_TRI:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
break;
default:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
}
return layer_state_str;
}
const char *read_logo(void) {
static char logo[] = {
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
0};
return logo;
}
char keylog_str[24] = {};
char keylogs_str[21] = {};
int keylogs_str_idx = 0;
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ',
' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '};
void set_keylog(uint16_t keycode, keyrecord_t *record) {
char name = ' ';
if (keycode < 60) {
name = code_to_name[keycode];
}
// update keylog
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
record->event.key.row, record->event.key.col,
keycode, name);
// update keylogs
if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
keylogs_str_idx = 0;
for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
keylogs_str[i] = ' ';
}
}
keylogs_str[keylogs_str_idx] = name;
keylogs_str_idx++;
}
const char *read_keylog(void) {
return keylog_str;
}
const char *read_keylogs(void) {
return keylogs_str;
}
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_keyboard_master())
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
return rotation;
}
void oled_task_user(void) {
if (is_keyboard_master()) {
// If you want to change the display of OLED, you need to change here
oled_write_ln(read_layer_state(), false);
oled_write_ln(read_keylog(), false);
oled_write_ln(read_keylogs(), false);
//oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false);
//oled_write_ln(read_host_led_state(), false);
//oled_write_ln(read_timelog(), false);
} else {
oled_write(read_logo(), false);
}
}
#endif // OLED_DRIVER_ENABLE
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef OLED_DRIVER_ENABLE
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}
#ifdef RGBLIGHT_ENABLE
char rbf_info_str[24];
const char *read_rgb_info(void) {
snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d",
rgblight_config.enable ? "on" : "- ", rgblight_config.mode,
rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
return rbf_info_str;
}
#endif