keyboard/qmk/tmk_core/protocol/serial_soft.c

235 lines
6.1 KiB
C
Raw Normal View History

/*
Copyright 2012 Jun WAKO <wakojun@gmail.com>
This software is licensed with a Modified BSD License.
All of this is supposed to be Free Software, Open Source, DFSG-free,
GPL-compatible, and OK to use in both free and proprietary applications.
Additions and corrections to this file are welcome.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
* Neither the name of the copyright holders nor the names of
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "serial.h"
/*
* Stupid Inefficient Busy-wait Software Serial
* which is still useful for negative logic signal like Sun protocol
* if it is not supported by hardware UART.
*
* TODO: delay is not accurate enough. Instruction cycle should be counted and inline assemby is needed.
*/
#define WAIT_US (1000000L / SERIAL_SOFT_BAUD)
#ifdef SERIAL_SOFT_LOGIC_NEGATIVE
# define SERIAL_SOFT_RXD_IN() !(SERIAL_SOFT_RXD_READ())
# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_LO()
# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_HI()
#else
# define SERIAL_SOFT_RXD_IN() !!(SERIAL_SOFT_RXD_READ())
# define SERIAL_SOFT_TXD_ON() SERIAL_SOFT_TXD_HI()
# define SERIAL_SOFT_TXD_OFF() SERIAL_SOFT_TXD_LO()
#endif
#ifdef SERIAL_SOFT_PARITY_EVEN
# define SERIAL_SOFT_PARITY_VAL 0
#elif defined(SERIAL_SOFT_PARITY_ODD)
# define SERIAL_SOFT_PARITY_VAL 1
#endif
/* debug for signal timing, see debug pin with oscilloscope */
#ifdef SERIAL_SOFT_DEBUG
# define SERIAL_SOFT_DEBUG_INIT() (DDRD |= 1 << 7)
# define SERIAL_SOFT_DEBUG_TGL() (PORTD ^= 1 << 7)
#else
# define SERIAL_SOFT_DEBUG_INIT()
# define SERIAL_SOFT_DEBUG_TGL()
#endif
void serial_init(void) {
SERIAL_SOFT_DEBUG_INIT();
SERIAL_SOFT_RXD_INIT();
SERIAL_SOFT_TXD_INIT();
}
/* RX ring buffer */
#define RBUF_SIZE 8
static uint8_t rbuf[RBUF_SIZE];
static uint8_t rbuf_head = 0;
static uint8_t rbuf_tail = 0;
uint8_t serial_recv(void) {
uint8_t data = 0;
if (rbuf_head == rbuf_tail) {
return 0;
}
data = rbuf[rbuf_tail];
rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
return data;
}
int16_t serial_recv2(void) {
uint8_t data = 0;
if (rbuf_head == rbuf_tail) {
return -1;
}
data = rbuf[rbuf_tail];
rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
return data;
}
void serial_send(uint8_t data) {
/* signal state: IDLE: ON, START: OFF, STOP: ON, DATA0: OFF, DATA1: ON */
#ifdef SERIAL_SOFT_BIT_ORDER_MSB
# ifdef SERIAL_SOFT_DATA_7BIT
uint8_t mask = 0x40;
# else
uint8_t mask = 0x80;
# endif
#else
uint8_t mask = 0x01;
#endif
uint8_t parity = 0;
/* start bit */
SERIAL_SOFT_TXD_OFF();
_delay_us(WAIT_US);
#ifdef SERIAL_SOFT_DATA_7BIT
while (mask & 0x7F) {
#else
while (mask & 0xFF) {
#endif
if (data & mask) {
SERIAL_SOFT_TXD_ON();
parity ^= 1;
} else {
SERIAL_SOFT_TXD_OFF();
}
_delay_us(WAIT_US);
#ifdef SERIAL_SOFT_BIT_ORDER_MSB
mask >>= 1;
#else
mask <<= 1;
#endif
}
#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
/* to center of parity bit */
if (parity != SERIAL_SOFT_PARITY_VAL) {
SERIAL_SOFT_TXD_ON();
} else {
SERIAL_SOFT_TXD_OFF();
}
_delay_us(WAIT_US);
#endif
/* stop bit */
SERIAL_SOFT_TXD_ON();
_delay_us(WAIT_US);
}
/* detect edge of start bit */
ISR(SERIAL_SOFT_RXD_VECT) {
SERIAL_SOFT_DEBUG_TGL();
SERIAL_SOFT_RXD_INT_ENTER();
uint8_t data = 0;
#ifdef SERIAL_SOFT_BIT_ORDER_MSB
# ifdef SERIAL_SOFT_DATA_7BIT
uint8_t mask = 0x40;
# else
uint8_t mask = 0x80;
# endif
#else
uint8_t mask = 0x01;
#endif
uint8_t parity = 0;
/* to center of start bit */
_delay_us(WAIT_US / 2);
SERIAL_SOFT_DEBUG_TGL();
do {
/* to center of next bit */
_delay_us(WAIT_US);
SERIAL_SOFT_DEBUG_TGL();
if (SERIAL_SOFT_RXD_IN()) {
data |= mask;
parity ^= 1;
}
#ifdef SERIAL_SOFT_BIT_ORDER_MSB
mask >>= 1;
#else
mask <<= 1;
#endif
#ifdef SERIAL_SOFT_DATA_7BIT
} while (mask & 0x7F);
#else
} while (mask & 0xFF);
#endif
#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
/* to center of parity bit */
_delay_us(WAIT_US);
if (SERIAL_SOFT_RXD_IN()) {
parity ^= 1;
}
SERIAL_SOFT_DEBUG_TGL();
#endif
/* to center of stop bit */
_delay_us(WAIT_US);
uint8_t next = (rbuf_head + 1) % RBUF_SIZE;
#if defined(SERIAL_SOFT_PARITY_EVEN) || defined(SERIAL_SOFT_PARITY_ODD)
if ((parity == SERIAL_SOFT_PARITY_VAL) && next != rbuf_tail) {
#else
if (next != rbuf_tail) {
#endif
rbuf[rbuf_head] = data;
rbuf_head = next;
}
SERIAL_SOFT_RXD_INT_EXIT();
SERIAL_SOFT_DEBUG_TGL();
}