diff --git a/hardware/arduino/i2c_dip/master_reader/master_reader.ino b/hardware/arduino/i2c_dip/master_reader/master_reader.ino
index 6acfe42..e07ef33 100644
--- a/hardware/arduino/i2c_dip/master_reader/master_reader.ino
+++ b/hardware/arduino/i2c_dip/master_reader/master_reader.ino
@@ -15,16 +15,18 @@
 void setup() {
   Wire.begin();        // join i2c bus (address optional for master)
   Serial.begin(115200);  // start serial for output
-  while(!Serial);
+  while (!Serial);
 }
 
 void loop() {
-  Wire.requestFrom(0x5F, sizeof(int));    // request 6 bytes from slave device #8
-
-  //while (Wire.available()) { // slave may send less than requested
-    uint8_t value = Wire.read(); // receive a byte as character
-    Serial.println(value);         // print the character
-  //}
-
+  Wire.requestFrom(0x65, 2);
+  // Wait for data to become available -- can be a delayed response due to # of pins to enumerate
+  while(!Wire.available());
+  byte dip_1 = Wire.read();
+  byte dip_2 = Wire.read();
+  Serial.print("DIP 1: ");
+  Serial.println(dip_1, BIN);
+  Serial.print("DIP 2: ");
+  Serial.println(dip_2, BIN);
   delay(500);
 }
diff --git a/hardware/arduino/i2c_dip/schematic/Schematic_Home-Assistant_i2c-DIP-Switch_20190530194256.pdf b/hardware/arduino/i2c_dip/schematic/Schematic_Home-Assistant_i2c-DIP-Switch_20190530194256.pdf
new file mode 100644
index 0000000..7728aee
Binary files /dev/null and b/hardware/arduino/i2c_dip/schematic/Schematic_Home-Assistant_i2c-DIP-Switch_20190530194256.pdf differ
diff --git a/hardware/arduino/i2c_dip/schematic/Schematic_Home-Assistant_i2c-DIP-Switch_20190530194316.png b/hardware/arduino/i2c_dip/schematic/Schematic_Home-Assistant_i2c-DIP-Switch_20190530194316.png
new file mode 100644
index 0000000..3cc5f82
Binary files /dev/null and b/hardware/arduino/i2c_dip/schematic/Schematic_Home-Assistant_i2c-DIP-Switch_20190530194316.png differ
diff --git a/hardware/arduino/i2c_dip/slave_sender/slave_sender.ino b/hardware/arduino/i2c_dip/slave_sender/slave_sender.ino
index cf5de06..231f9f2 100644
--- a/hardware/arduino/i2c_dip/slave_sender/slave_sender.ino
+++ b/hardware/arduino/i2c_dip/slave_sender/slave_sender.ino
@@ -12,7 +12,7 @@
 //    07           5/PD3/INT1
 //    08           6/PD4
 //    09           7/PD5
-//    10           GND 
+//    10           GND
 //    11           8/PD6
 //    12           9/PB0/PCINT0
 //    13           10/PB1/PCINT1
@@ -28,10 +28,15 @@
 // sda: 17
 // scl: 19
 
-// DIP Switch ATTiny Pins
+// DIP Switch 1 ATTiny Pins
 // 2 - 9
 
-#define I2C_ADDRESS 0x96
+// DIP Switch 2 ATTiny Pins
+// 1
+// 11-16
+// 18
+
+#define I2C_ADDRESS 0x65
 
 #include <Wire.h>
 
@@ -44,7 +49,15 @@ void setup() {
   pinMode(5, INPUT);
   pinMode(6, INPUT);
   pinMode(7, INPUT);
-  
+  pinMode(17, INPUT);
+  pinMode(8, INPUT);
+  pinMode(9, INPUT);
+  pinMode(10, INPUT);
+  pinMode(11, INPUT);
+  pinMode(12, INPUT);
+  pinMode(13, INPUT);
+  pinMode(15, INPUT);
+
   Wire.begin(I2C_ADDRESS);
   Wire.onRequest(requestEvent);
 }
@@ -55,15 +68,24 @@ void loop() {
 
 // function that executes whenever data is requested by master
 // this function is registered as an event, see setup()
-byte dip_switch = 0b00000000;
+byte dip_switches[] = {0b00000000, 0b00000000};
 void requestEvent() {
-  bitWrite(dip_switch, 0, digitalRead(0));
-  bitWrite(dip_switch, 1, digitalRead(1));
-  bitWrite(dip_switch, 2, digitalRead(2));
-  bitWrite(dip_switch, 3, digitalRead(3));
-  bitWrite(dip_switch, 4, digitalRead(4));
-  bitWrite(dip_switch, 5, digitalRead(5));
-  bitWrite(dip_switch, 6, digitalRead(6));
-  bitWrite(dip_switch, 7, digitalRead(7));
-  Wire.write(dip_switch);
+  bitWrite(dip_switches[0], 7, digitalRead(0));
+  bitWrite(dip_switches[0], 6, digitalRead(1));
+  bitWrite(dip_switches[0], 5, digitalRead(2));
+  bitWrite(dip_switches[0], 4, digitalRead(3));
+  bitWrite(dip_switches[0], 3, digitalRead(4));
+  bitWrite(dip_switches[0], 2, digitalRead(5));
+  bitWrite(dip_switches[0], 1, digitalRead(6));
+  bitWrite(dip_switches[0], 0, digitalRead(7));
+
+  bitWrite(dip_switches[1], 0, digitalRead(15));
+  bitWrite(dip_switches[1], 1, digitalRead(13));
+  bitWrite(dip_switches[1], 2, digitalRead(12));
+  bitWrite(dip_switches[1], 3, digitalRead(11));
+  bitWrite(dip_switches[1], 4, digitalRead(10));
+  bitWrite(dip_switches[1], 5, digitalRead(9));
+  bitWrite(dip_switches[1], 6, digitalRead(8));
+  bitWrite(dip_switches[1], 7, digitalRead(17));
+  Wire.write(dip_switches, sizeof(dip_switches));
 }
diff --git a/hardware/esphome/plant_dashboard/plant_dashboard.yaml b/hardware/esphome/plant_dashboard/plant_dashboard.yaml
index ef7ee55..c2ba421 100644
--- a/hardware/esphome/plant_dashboard/plant_dashboard.yaml
+++ b/hardware/esphome/plant_dashboard/plant_dashboard.yaml
@@ -115,11 +115,19 @@ esphome:
       - lambda: |-
           digitalWrite(13, LOW);
 
+# Basic status infos via blinky LED
+# https://esphome.io/components/status_led.html
+status_led:
+  pin:
+    number: 32
+    inverted: True
+
 # WiFi config
 wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password
   domain: !secret node_domain
+  power_save_mode: light
 
 # Enable I2C (Qwiic and others)
 i2c:
@@ -134,7 +142,7 @@ spi:
 deep_sleep:
   id: deep_sleep_main
   run_duration: 5min
-  sleep_duration: 1h
+  sleep_duration: 90min
   wakeup_pin_mode: INVERT_WAKEUP # stop caring and be judicious about tolerance of goofy pin modes
 
 # Enable logging