kemonine
/
emacs
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
emacs/code/elpa/compat-29.1.4.1/compat.info

2952 lines
130 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This is doc0jZUSv.info, produced by makeinfo version 6.7 from
compat.texi.
Copyright © 2022-2023 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, with the Front-Cover Texts
being “A GNU Manual,” and with the Back-Cover Texts as in (a)
below. A copy of the license is included in the section entitled
“GNU Free Documentation License.”
(a) The FSF’s Back-Cover Text is: “You have the freedom to copy and
modify this GNU manual.”
INFO-DIR-SECTION Emacs
START-INFO-DIR-ENTRY
* Compat: (compat). Compatibility Library for Emacs Lisp.
END-INFO-DIR-ENTRY

File: doc0jZUSv.info, Node: Top, Next: Introduction, Up: (dir)
"Compat" Manual
***************
This manual documents the usage of the "Compat" Emacs lisp library, the
forward-compatibility library for Emacs Lisp, corresponding to version
29.1.4.1.
Copyright © 2022-2023 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, with the Front-Cover Texts
being “A GNU Manual,” and with the Back-Cover Texts as in (a)
below. A copy of the license is included in the section entitled
“GNU Free Documentation License.”
(a) The FSF’s Back-Cover Text is: “You have the freedom to copy and
modify this GNU manual.”
* Menu:
* Introduction::
* Support::
* Development::
* Function Index::
* Variable Index::
— The Detailed Node Listing —
Introduction
* Overview::
* Usage::
* Limitations::
Support
* Emacs 25.1:: Compatibility support for Emacs 25.1
* Emacs 26.1:: Compatibility support for Emacs 26.1
* Emacs 27.1:: Compatibility support for Emacs 27.1
* Emacs 28.1:: Compatibility support for Emacs 28.1
* Emacs 29.1:: Compatibility support for Emacs 29.1

File: doc0jZUSv.info, Node: Introduction, Next: Support, Prev: Top, Up: Top
1 Introduction
**************
* Menu:
* Overview::
* Usage::
* Limitations::

File: doc0jZUSv.info, Node: Overview, Next: Usage, Up: Introduction
1.1 Overview
============
The objective of Compat is to provide "forwards compatibility" library
for Emacs Lisp. By using Compat, an Elisp package does not have to make
the decision to either use new and useful functionality or support old
versions of Emacs.
The library provides support back until Emacs 24.4. The intended
audience are package developers that are interested in using newer
developments, without having to break compatibility.

File: doc0jZUSv.info, Node: Usage, Next: Limitations, Prev: Overview, Up: Introduction
1.2 Usage
=========
The intended use-case for this library is for package developers to add
as a dependency in the header:
;; Package-Requires: ((emacs "24.4") (compat "29.1.4.1"))
There is no need to depend on ‘emacs’ 24.4 specifically. One can
choose to any newer version, if features not provided by Compat
necessitate it, for example bug fixes or UI improvements.
In any file where compatibility forms are used, a
(require 'compat)
should be added early on. In packages which are part of Emacs itself
and which want to take advantage of Compat, the ‘noerror’ flag should be
specified: ‘(require 'compat nil 'noerror)’. In the future a minimal
version of Compat may be added to the Emacs core, such that the
‘noerror’ flag will not be necessary anymore.
This will load all necessary Compat definitions. Compat also loads
the ‘seq’ library which is preloaded by default on Emacs 29. Note that
if Compat is installed on a recent version of Emacs, all of the
definitions are disabled at compile time, such that no negative
performance impact is incurred.
Note that Compat provides replacement functions with extended
functionality for functions that are already defined (‘sort’, ‘assoc’,
...). These functions may have changed their calling convention
(additional optional arguments) or may have changed their behavior.
These functions must be looked up explicitly with ‘compat-function’ or
called explicitly with ‘compat-call’. We call them “Extended
Definitions”. In contrast, newly “Added Definitions” can be called as
usual.
(compat-call assoc key alist testfn) ;; Call extended `assoc'
(mapcan fun seq) ;; Call newly added `mapcan'
-- Macro: compat-call fun &rest args
This macro calls the compatibility function FUN with ARGS. Many
functions provided by Compat can be called directly without this
macro. However in the case where Compat provides an alternative
version of an existing function, the function call has to go
through ‘compat-call’. This happens for example when the calling
convention of a function has changed.
-- Macro: compat-function fun
This macro returns the compatibility function symbol for FUN. See
‘compat-call’ for a more convenient macro to directly call
compatibility functions.
If Compat is used in core packages, where Compat must be required
currently with the ‘noerror’ flag, the macros ‘compat-call’ and
‘compat-function’ ar not available. In the future the macros could be
added to subr. Alternatively a minimal version of compat.el could be
added to the core. For now it is necessary to replicate the definition
of the macros within core packages. For example the package ERC defines
its own macro ‘erc-compat-call’, which replicates the Compat definition
precisely.
This design has been chosen since Compat does not advise or override
existing functions. Generally Compat is written in defensive style
which is supposed to reduce potential breakage, and to increase the
chances of staying binary compatible across releases. The extensive
test coverage ensures that we can maintain high quality, which is
crucial for Compat which is not restricted to a namespace like usual
libraries.
If you intend to use a compatibility function in your code it is
recommended that you take a look at the test suite ‘compat-tests.el’.
There you can see the supported calling conventions, which are
guaranteed to work on the supported Emacs versions. We ensure this
using continuous integration. All functions provided by Compat are
covered by the test suite. There is a link to the corresponding test on
the first line of each definition.
You may want to subscribe to the compat-announce
(https://lists.sr.ht/~pkal/compat-announce) mailing list to be notified
when new versions are released or relevant changes are made. We also
provide a development mailing list
(https://lists.sr.ht/~pkal/compat-devel) (~pkal/compat-devel@lists.sr.ht
<~pkal/compat-devel@lists.sr.ht>).

File: doc0jZUSv.info, Node: Limitations, Prev: Usage, Up: Introduction
1.3 Limitations
===============
The Compat library has a number of limitations. Complete backwards
compatibility cannot be provided due to the scope of Compat and for
technical reasons. The scope is intentionally restricted in order to
limit the size of Compat and to ensure that the library stays
maintainable.
Emacs version 24.4 is chosen as the oldest version supported by
Compat, since Elisp has seen significant changes at that version. On
the library level, subr-x was introduced in 24.4. Most popular Emacs
packages already require 24.4 or even newer versions of Emacs.
Supporting for more historical Emacs versions would complicate
maintainance significantly while only few packages and users would
benefit.
Below we list a number of reasons why certain functionality cannot be
provided. Note that in some special cases exceptions can be made and
functions can still be added to Compat even if they satisfy the criteria
from the list. In case you miss functionality which you think should
belong here, a *note report: Development. would be much appreciated.
• The additional functionality is a command or a user-facing minor or
major mode. Compat is limited to functionality on the “library
level”. Generally functions provided by Compat are
non-interactive, such that the user interface (M-x) is unaffected
by the presence of Compat.
• The function is not useful for package authors or not intended to
be used by packages, but is only useful on the configuration level.
The macro ‘setopt’ is such an example.
• Private (double dashed) functions are not ported back. If Compat
includes some private functions, they are meant purely for internal
usage.
• The added or extended function belongs to the “application level”
and not the “library level”. Features which are not preloaded
often belong to the “application level”. Application examples are
programming modes or modes like Dired, IRC and Gnus. If these
modes are extended with new functions, these are not ported back.
• An existing function or macro was extended by some new
functionality. To support these cases, the function or macro would
have to be advised. Since this is invasive and adds significant
overhead, even when the new feature is not used, Compat does not
use advices. As a compromise, compatibility functions and macros
with a changed calling convention or behavior can be accessed via
the ‘compat-function’ and ‘compat-call’ macros. In this manual we
call such definitions “Extended Definitions”. An example is the
function ‘plist-get’. Note that extended functions are subject to
closer scrutiny, since their usage via ‘compat-call’ is not
completely painless. If a particular extended function does not
see much usage or the extension yields only marginal benefits, we
may not provide it as part of Compat.
• Bug fixes are usually not ported back as part of Compat. Sometimes
library functions show wrong behavior for edge cases. In those
cases Compat could in principle provide a compatibility function
which is invoked via ‘compat-call’. Such extended definitions
would increase the maintainance burden of Compat. At the same time
the benefits would be small given that Compat does not override
existing definitions.
• The definition belongs to an Emacs core package, which is also
distributed via ELPA. Compat does not have to provide backward
compatibility for core packages since the updated package can be
installed directly from ELPA. Examples include the libraries xref,
project, seq, map and transient.
• New functionality depends on an entire new, non-trivial core
library, which is infeasible to duplicate within Compat. If a
backport of such a library is required, the preferred approach is
to either release the library separately on GNU ELPA as a core
package or as a separately maintained GNU ELPA package. An example
is the iso8601 library.
• New functionality was implemented in the C core, or depends on
external libraries that cannot be reasonably duplicated in the
scope of a compatibility library. Sometimes new functions on the C
level rely on internal data structures, which we cannot access,
rendering a backport impossible. For example a missing libxml
cannot be emulated.
• The semantics of Elisp changed on a deep level. For example the
addition of Bigint support in Emacs 27.1 cannot be replicated on
the level of Compat.

File: doc0jZUSv.info, Node: Support, Next: Development, Prev: Introduction, Up: Top
2 Support
*********
This section goes into the features that Compat manages and doesn’t
manage to provide for each Emacs version.
* Menu:
* Emacs 25.1:: Compatibility support for Emacs 25.1
* Emacs 26.1:: Compatibility support for Emacs 26.1
* Emacs 27.1:: Compatibility support for Emacs 27.1
* Emacs 28.1:: Compatibility support for Emacs 28.1
* Emacs 29.1:: Compatibility support for Emacs 29.1

File: doc0jZUSv.info, Node: Emacs 25.1, Next: Emacs 26.1, Up: Support
2.1 Emacs 25.1
==============
2.1.1 Added Definitions
-----------------------
The following functions and macros are implemented in Emacs 25.1. These
functions are made available by Compat on Emacs versions older than
25.1.
-- User Option: text-quoting-style
The value of this user option is a symbol that specifies the style
Emacs should use for single quotes in the wording of help and
messages. If the option’s value is ‘curve’, the style is ‘like
this’ with curved single quotes. If the value is ‘straight’, the
style is 'like this' with straight apostrophes. If the value is
‘grave’, quotes are not translated and the style is `like this'
with grave accent and apostrophe, the standard style before Emacs
version 25. The default value ‘nil’ acts like ‘curve’ if curved
single quotes seem to be displayable, and like ‘grave’ otherwise.
This option is useful on platforms that have problems with curved
quotes. You can customize it freely according to your personal
preference.
-- Function: region-bounds
Return the boundaries of the region. Value is a list of one or
more cons cells of the form ‘(start . end)’. It will have more
than one cons cell when the region is non-contiguous, see
‘region-noncontiguous-p’ and ‘extract-rectangle-bounds’.
-- Function: region-noncontiguous-p
Return non-nil if the region contains several pieces. An example
is a rectangular region handled as a list of separate contiguous
regions for each line.
-- Macro: save-mark-and-excursion body...
This macro is like ‘save-excursion’, but also saves and restores
the mark location and ‘mark-active’. This macro does what
‘save-excursion’ did before Emacs 25.1.
-- Function: format-message string &rest objects
This function acts like ‘format’, except it also converts any grave
accents (`) and apostrophes (') in STRING as per the value of
‘text-quoting-style’.
Typically grave accent and apostrophe in the format translate to
matching curved quotes, e.g., "Missing `%s'" might result in
"Missing ‘foo’". *Note (elisp)Text Quoting Style::, for how to
influence or inhibit this translation.
*note (elisp)Formatting Strings::.
-- Function: directory-name-p filename
This function returns non-‘nil’ if FILENAME ends with a directory
separator character. This is the forward slash ‘/’ on GNU and
other POSIX-like systems; MS-Windows and MS-DOS recognize both the
forward slash and the backslash ‘\’ as directory separators.
*Note (elisp)Directory Names::.
-- Function: string-greaterp string1 string2
This function returns the result of comparing STRING1 and STRING2
in the opposite order, i.e., it is equivalent to calling
‘(string-lessp STRING2 STRING1)’.
*Note (elisp)Text Comparison::.
-- Macro: with-file-modes mode body...
This macro evaluates the BODY forms with the default permissions
for new files temporarily set to MODES (whose value is as for
‘set-file-modes’ above). When finished, it restores the original
default file permissions, and returns the value of the last form in
BODY.
This is useful for creating private files, for example.
*Note (elisp)Changing Files::.
-- Function: alist-get key alist &optional default remove
This function is similar to ‘assq’. It finds the first association
‘(KEY . VALUE)’ by comparing KEY with ALIST elements, and, if
found, returns the VALUE of that association. If no association is
found, the function returns DEFAULT.
This is a generalized variable (*note (elisp)Generalized
Variables::) that can be used to change a value with ‘setf’. When
using it to set a value, optional argument REMOVE non-‘nil’ means
to remove KEY’s association from ALIST if the new value is ‘eql’ to
DEFAULT.
*note (elisp)Association Lists::.
-- Macro: if-let (bindings...) then &rest else...
As with ‘let*’, BINDINGS will consist of ‘(SYMBOL VALUE-FORM)’
entries that are evaluated and bound sequentially. If all
VALUE-FORM evaluate to non-‘nil’ values, then THEN is evaluated as
were the case with a regular ‘let*’ expression, with all the
variables bound. If any VALUE-FORM evaluates to ‘nil’, ELSE is
evaluated, without any bound variables.
A binding may also optionally drop the SYMBOL, and simplify to
‘(VALUE-FORM)’ if only the test is of interest.
For the sake of backwards compatibility, it is possible to write a
single binding without a binding list:
(if-let* (SYMBOL (test)) foo bar)
≡
(if-let* ((SYMBOL (test))) foo bar)
-- Macro: when-let (bindings...) &rest body
As with ‘when’, if one is only interested in the case where all
BINDINGS are non-nil. Otherwise BINDINGS are interpreted just as
they are by ‘if-let*’.
-- Function: hash-table-empty hash-table
Check whether HASH-TABLE is empty (has 0 elements).
-- Macro: thread-first &rest forms
Combine FORMS into a single expression by “threading” each element
as the _first_ argument of their successor. Elements of FORMS can
either be an list of an atom.
For example, consider the threading expression and it’s equivalent
macro expansion:
(thread-first
5
(+ 20)
(/ 25)
-
(+ 40))
≡
(+ (- (/ (+ 5 20) 25)) 40)
Note how the single ‘-’ got converted into a list before threading.
This example uses arithmetic functions, but ‘thread-first’ is not
restricted to arithmetic or side-effect free code.
-- Macro: thread-last &rest forms
Combine FORMS into a single expression by “threading” each element
as the _last_ argument of their successor. Elements of FORMS can
either be an list of an atom.
For example, consider the threading expression and it’s equivalent
macro expansion:
(thread-first
5
(+ 20)
(/ 25)
-
(+ 40))
≡
(+ 40 (- (/ 25 (+ 20 5))))
Note how the single ‘-’ got converted into a list before threading.
This example uses arithmetic functions, but ‘thread-last’ is not
restricted to arithmetic or side-effect free code.
-- Function: macroexpand-1 form &optional environment
This function expands macros like ‘macroexpand’, but it only
performs one step of the expansion: if the result is another macro
call, ‘macroexpand-1’ will not expand it.
*Note Expansion: (elisp)Expansion.
-- Function: macroexp-quote e
Return an expression E such that ‘(eval e)’ is V.
-- Function: macroexp-parse body
Parse a function BODY into ‘(declarations . exps)’.
-- Function: bool-vector &rest objects
This function creates and returns a bool-vector whose elements are
the arguments, OBJECTS.
*Note (elisp)Bool-Vectors::.
2.1.2 Extended Definitions
--------------------------
These functions must be called explicitly via ‘compat-call’, since their
calling convention or behavior was extended in Emacs 25.1:
-- Function: compat-call sort sequence predicate
This function sorts SEQUENCE stably. Note that this function
doesn’t work for all sequences; it may be used only for lists and
vectors. If SEQUENCE is a list, it is modified destructively.
This functions returns the sorted SEQUENCE and compares elements
using PREDICATE. A stable sort is one in which elements with equal
sort keys maintain their relative order before and after the sort.
Stability is important when successive sorts are used to order
elements according to different criteria.
*Note (elisp)Sequence Functions::.
The compatibility version adds support for vectors to be sorted,
not just lists.
2.1.3 Missing Definitions
-------------------------
Compat does not provide support for the following Lisp features
implemented in 25.1:
• The function ‘macroexp-macroexpand’.
• The macro ‘macroexp-let2*’.
• The function ‘directory-files-recursively’.
• New ‘pcase’ patterns.
• The hook ‘prefix-command-echo-keystrokes-functions’ and
‘prefix-command-preserve-state-hook’.
• The hook ‘pre-redisplay-functions’.
• The function ‘make-process’.
• Support for the variable ‘inhibit-message’.
• The ‘define-inline’ functionality.
• The functions ‘string-collate-lessp’ and ‘string-collate-equalp’.
• The function ‘funcall-interactively’.
• The function ‘buffer-substring-with-bidi-context’.
• The function ‘font-info’.
• The function ‘default-font-width’.
• The function ‘window-font-height’ and ‘window-font-width’.
• The function ‘window-max-chars-per-line’.
• The function ‘set-binary-mode’.
• The functions ‘bufferpos-to-filepos’ and ‘filepos-to-bufferpos’.
• The ‘thunk’ library.

File: doc0jZUSv.info, Node: Emacs 26.1, Next: Emacs 27.1, Prev: Emacs 25.1, Up: Support
2.2 Emacs 26.1
==============
2.2.1 Added Definitions
-----------------------
The following functions and macros are implemented in Emacs 26.1. These
functions are made available by Compat on Emacs versions older than
26.1.
-- Function: assoc-delete-all key alist
This function is like ‘assq-delete-all’ except that it uses ‘equal’
to compare elements.
-- Function: read-answer question answers
This function prompts the user with text in QUESTION, which should
end in the ‘SPC’ character. The function includes in the prompt
the possible responses in ANSWERS by appending them to the end of
QUESTION. The possible responses are provided in ANSWERS as an
alist whose elements are of the following form:
(LONG-ANSWER SHORT-ANSWER HELP-MESSAGE)
where LONG-ANSWER is the complete text of the user response, a
string; SHORT-ANSWER is a short form of the same response, a single
character or a function key; and HELP-MESSAGE is the text that
describes the meaning of the answer. If the variable
‘read-answer-short’ is non-‘nil’, the prompt will show the short
variants of the possible answers and the user is expected to type
the single characters/keys shown in the prompt; otherwise the
prompt will show the long variants of the answers, and the user is
expected to type the full text of one of the answers and end by
pressing <RET>. If ‘use-dialog-box’ is non-‘nil’, and this
function was invoked by mouse events, the question and the answers
will be displayed in a GUI dialog box.
The function returns the text of the LONG-ANSWER selected by the
user, regardless of whether long or short answers were shown in the
prompt and typed by the user.
Here is an example of using this function:
(let ((read-answer-short t))
(read-answer "Foo "
'(("yes" ?y "perform the action")
("no" ?n "skip to the next")
("all" ?! "perform for the rest without more questions")
("help" ?h "show help")
("quit" ?q "exit"))))
-- Function: mapcan function sequence
This function applies FUNCTION to each element of SEQUENCE, like
‘mapcar’, but instead of collecting the results into a list, it
returns a single list with all the elements of the results (which
must be lists), by altering the results (using ‘nconc’; *note
(elisp)Rearrangement::). Like with ‘mapcar’, SEQUENCE can be of
any type except a char-table.
;; Contrast this: (mapcar #'list '(a b c d)) ⇒ ((a) (b) (c)
(d)) ;; with this: (mapcan #'list '(a b c d)) ⇒ (a b c d)
*Note (elisp)Mapping Functions::.
-- Function: cXXXr
-- Function: cXXXXr
*Note (elisp)List Elements::.
-- Function: gensym &optional prefix
This function returns a symbol using ‘make-symbol’, whose name is
made by appending ‘gensym-counter’ to PREFIX and incrementing that
counter, guaranteeing that no two calls to this function will
generate a symbol with the same name. The prefix defaults to
‘"g"’.
-- Variable: gensym-counter
See ‘gensym’.
-- Function: buffer-hash &optional buffer-or-name
Return a hash of BUFFER-OR-NAME. If ‘nil’, this defaults to the
current buffer. As opposed to ‘secure-hash’, this function
computes the hash based on the internal representation of the
buffer, disregarding any coding systems. It’s therefore only
useful when comparing two buffers running in the same Emacs, and is
not guaranteed to return the same hash between different Emacs
versions. It should be somewhat more efficient on larger buffers
than ‘secure-hash’ is, and should not allocate more memory.
-- Macro: file-name-unquote name
This macro removes the quotation prefix ‘/:’ from the file NAME, if
any. If NAME is a remote file name, the local part of NAME is
unquoted.
-- Function: file-name-quoted-p name
This macro returns non-‘nil’, when NAME is quoted with the prefix
‘/:’. If NAME is a remote file name, the local part of NAME is
checked.
*Note (elisp)File Name Expansion::.
-- Function: file-name-quote name
This macro adds the quotation prefix ‘/:’ to the file NAME. For a
local file NAME, it prefixes NAME with ‘/:’. If NAME is a remote
file name, the local part of NAME (*note (elisp)Magic File Names::)
is quoted. If NAME is already a quoted file name, NAME is returned
unchanged.
(substitute-in-file-name (compat-call file-name-quote "bar/~/foo")) ⇒
"/:bar/~/foo"
(substitute-in-file-name (compat-call file-name-quote "/ssh:host:bar/~/foo"))
⇒ "/ssh:host:/:bar/~/foo"
The macro cannot be used to suppress file name handlers from magic
file names (*note (elisp)Magic File Names::).
*Note (elisp)File Name Expansion::.
-- Function: make-nearby-temp-file prefix &optional dir-flag suffix
This function is similar to ‘make-temp-file’, but it creates a
temporary file as close as possible to ‘default-directory’. If
PREFIX is a relative file name, and ‘default-directory’ is a remote
file name or located on a mounted file systems, the temporary file
is created in the directory returned by the function
‘temporary-file-directory’. Otherwise, the function
‘make-temp-file’ is used. PREFIX, DIR-FLAG and SUFFIX have the
same meaning as in ‘make-temp-file’.
(let ((default-directory "/ssh:remotehost:")) (make-nearby-temp-file
"foo")) ⇒ "/ssh:remotehost:/tmp/foo232J6v"
-- Variable: mounted-file-systems
A regular expression matching files names that are probably on a
mounted file system.
-- Function: temporary-file-directory
The directory for writing temporary files via
‘make-nearby-temp-file’. In case of a remote ‘default-directory’,
this is a directory for temporary files on that remote host. If
such a directory does not exist, or ‘default-directory’ ought to be
located on a mounted file system (see ‘mounted-file-systems’), the
function returns ‘default-directory’. For a non-remote and
non-mounted ‘default-directory’, the value of the variable
‘temporary-file-directory’ is returned.
*Note (elisp)Unique File Names::.
-- Macro: if-let* (bindings...) then &rest else
‘if-let*’ is mostly equivalent to ‘if-let’, with the exception that
the legacy ‘(if (VAR (test)) foo bar)’ syntax is not permitted.
-- Macro: when-let* (bindings...) then &rest else
‘when-let*’ is mostly equivalent to ‘when-let’, with the exception
that the legacy ‘(when-let (VAR (test)) foo bar)’ syntax is not
permitted.
-- Macro: and-let* (bindings...) &rest body
A combination of LET* and AND, analogous to ‘when-let*’. If all
BINDINGS are non-‘nil’ and BODY is ‘nil’, then the result of the
‘and-let*’ form will be the last value bound in BINDINGS.
**Please Note:** The implementation provided by Compat does not
include a bug that was observed with Emacs 26 (see
<https://debbugs.gnu.org/cgi/bugreport.cgi?bug=31840>).
-- Function: file-local-name filename
This function returns the _local part_ of FILENAME. This is the
part of the file’s name that identifies it on the remote host, and
is typically obtained by removing from the remote file name the
parts that specify the remote host and the method of accessing it.
For example:
(file-local-name "/ssh:USER@HOST:/foo/bar") ⇒
"/foo/bar"
For a remote FILENAME, this function returns a file name which
could be used directly as an argument of a remote process (*note
(elisp)Asynchronous Processes::, and *note (elisp)Synchronous
Processes::), and as the program to run on the remote host. If
FILENAME is local, this function returns it unchanged.
*Note (elisp)Magic File Names::.
-- Function: read-multiple-choice prompt choices
Ask user a multiple choice question. PROMPT should be a string
that will be displayed as the prompt.
CHOICES is an alist where the first element in each entry is a
character to be entered, the second element is a short name for the
entry to be displayed while prompting (if there’s room, it might be
shortened), and the third, optional entry is a longer explanation
that will be displayed in a help buffer if the user requests more
help.
See *note Reading One Event: (elisp)Reading One Event.
-- Function: image-property
Defined in ‘image.el’.
This function can also be used as a generalised variable.
-- Function: file-attribute-type
Return the field _type_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-link-number
Return the field _link-number_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-user-id
Return the field _user-id_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-group-id
Return the field _group-id_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-access-time
Return the field _access-time_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-modification-time
Return the field _modification-time_ as generated by
‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-status-change-time
Return the field _modification-time_ as generated by
‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-size
Return the field _size_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-modes
Return the field _modes_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-inode-number
Return the field _inode-number_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-device-number
Return the field _device-number_ as generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-attribute-collect attributes &rest attr-names
Filter the file attributes ATTRIBUTES, as generated by
‘file-attributes’, according to ATTR-NAMES.
Valid attribute names for ATTR-NAMES are: type, link-number,
user-id, group-id, access-time, modification-time,
status-change-time, size, modes, inode-number and device-number.
(file-attributes ".") ⇒ (t 1 1000 1000 (25329 18215 325481 96000) (25325 15364 530263 840000) (25325 15364 530263 840000) 788 "drwxr-xr-x" t 137819 40)
(file-attribute-collect (file-attributes ".") 'type 'modes
'inode-number) ⇒ (t "drwxr-xr-x" 137819)
2.2.2 Extended Definitions
--------------------------
These functions must be called explicitly via ‘compat-call’, since their
calling convention or behavior was extended in Emacs 26.1:
-- Function: compat-call make-temp-file prefix &optional dir-flag
suffix text
This function creates a temporary file and returns its name. Emacs
creates the temporary file’s name by adding to PREFIX some random
characters that are different in each Emacs job. The result is
guaranteed to be a newly created file, containing TEXT if that’s
given as a string and empty otherwise. On MS-DOS, this function
can truncate PREFIX to fit into the 8+3 file-name limits. If
PREFIX is a relative file name, it is expanded against
‘temporary-file-directory’.
The compatibility version adds support for handling the optional
argument TEXT.
(make-temp-file "foo")
⇒ "/tmp/foo232J6v"
When ‘make-temp-file’ returns, the file has been created and is
empty. At that point, you should write the intended contents into
the file.
If DIR-FLAG is non-‘nil’, ‘make-temp-file’ creates an empty
directory instead of an empty file. It returns the file name, not
the directory name, of that directory. *Note (elisp)Directory
Names::.
If SUFFIX is non-‘nil’, ‘make-temp-file’ adds it at the end of the
file name.
If TEXT is a string, ‘make-temp-file’ inserts it in the file.
To prevent conflicts among different libraries running in the same
Emacs, each Lisp program that uses ‘make-temp-file’ should have its
own PREFIX. The number added to the end of PREFIX distinguishes
between the same application running in different Emacs jobs.
Additional added characters permit a large number of distinct names
even in one Emacs job.
-- Function: compat-call assoc key alist &optional testfn
This function returns the first association for KEY in ALIST,
comparing KEY against the alist elements using TESTFN if it is a
function, and ‘equal’ otherwise (*note (elisp)Equality
Predicates::). If TESTFN is a function, it is called with two
arguments: the CAR of an element from ALIST and KEY. The function
returns ‘nil’ if no association in ALIST has a CAR equal to KEY, as
tested by TESTFN.
*Note (elisp)Association Lists::.
The compatibility version adds support for handling the optional
argument TESTFN.
-- Function: compat-call line-number-at-pos &optional pos absolute
This function returns the line number in the current buffer
corresponding to the buffer position POS. If POS is ‘nil’ or
omitted, the current buffer position is used. If ABSOLUTE is
‘nil’, the default, counting starts at ‘(point-min)’, so the value
refers to the contents of the accessible portion of the
(potentially narrowed) buffer. If ABSOLUTE is non-‘nil’, ignore
any narrowing and return
*Note (elisp)Text Lines::.
The compatibility version adds support for handling the optional
argument ABSOLUTE.
-- Function: compat-call alist-get key alist &optional default remove
testfn
*Note (elisp)Association Lists::. This function is similar to
‘assq’. It finds the first association ‘(KEY . VALUE)’ by
comparing KEY with ALIST elements, and, if found, returns the VALUE
of that association. If no association is found, the function
returns DEFAULT. Comparison of KEY against ALIST elements uses the
function specified by TESTFN, defaulting to ‘eq’.
*Note (elisp)Association Lists::.
The compatibility version handles the optional argument TESTFN. It
can also be used as a *note Generalized Variables:
(elisp)generalised variable.
-- Function: compat-call string-trim-left string &optional regexp
Remove the leading text that matches REGEXP from STRING. REGEXP
defaults to ‘[ \t\n\r]+’.
*Note (elisp)Creating Strings::.
The compatibility version handles the optional argument REGEXP.
-- Function: compat-call string-trim-right string &optional regexp
Remove the trailing text that matches REGEXP from STRING. REGEXP
defaults to ‘[ \t\n\r]+’.
*Note (elisp)Creating Strings::.
The compatibility version handles the optional argument REGEXP.
-- Function: compat-call string-trim string &optional trim-left
trim-right
Remove the leading text that matches TRIM-LEFT and trailing text
that matches TRIM-RIGHT from STRING. Both regexps default to ‘[
\t\n\r]+’.
*Note (elisp)Creating Strings::.
The compatibility version handles the optional arguments TRIM-LEFT
and TRIM-RIGHT.
2.2.3 Missing Definitions
-------------------------
Compat does not provide support for the following Lisp features
implemented in 26.1:
• The function ‘func-arity’.
• The function ‘secure-hash-algorithms’.
• The function ‘gnutls-available-p’.
• Support for records and record functions.
• The function ‘mapbacktrace’.
• The function ‘file-name-case-insensitive-p’.
• The additional elements of ‘parse-partial-sexp’.
• The function ‘add-variable-watcher’.
• The function ‘undo-amalgamate-change-group’.
• The function ‘char-from-name’
• Signalling errors when ‘length’ or ‘member’ deal with list cycles.
• The function ‘frame-list-z-order’.
• The function ‘frame-restack’.
• All changes related to ‘display-buffer’.
• The function ‘window-swap-states’.
• The function ‘string-version-lessp’.
• The ‘svg’ library.
• The ‘xdg’ library.

File: doc0jZUSv.info, Node: Emacs 27.1, Next: Emacs 28.1, Prev: Emacs 26.1, Up: Support
2.3 Emacs 27.1
==============
2.3.1 Added Definitions
-----------------------
The following functions and macros are implemented in Emacs 27.1. These
functions are made available by Compat on Emacs versions older than
27.1.
-- Function: major-mode-suspend
This function works like ‘fundamental-mode’, in that it kills all
buffer-local variables, but it also records the major mode in
effect, so that it could subsequently be restored. This function
and ‘major-mode-restore’ (described next) are useful when you need
to put a buffer under some specialized mode other than the one
Emacs chooses for it automatically, but would also like to be able
to switch back to the original mode later.
-- Function: major-mode-restore &optional avoided-modes
This function restores the major mode recorded by
‘major-mode-suspend’. If no major mode was recorded, this function
calls ‘normal-mode’, but tries to force it not to choose any modes
in AVOIDED-MODES, if that argument is non-‘nil’.
-- Function: ring-resize ring size
Set the size of RING to SIZE. If the new size is smaller, then the
oldest items in the ring are discarded.
-- Function: minibuffer-history-value
Return the value of the minibuffer input history list. If
MINIBUFFER-HISTORY-VARIABLE points to a buffer-local variable and
the minibuffer is active, return the buffer-local value for the
buffer that was current when the minibuffer was activated."
-- Macro: with-minibuffer-selected-window &rest body
Execute the forms in BODY from the minibuffer in its original
window. When used in a minibuffer window, select the window
selected just before the minibuffer was activated, and execute the
forms.
-- Function: read-char-from-minibuffer prompt &optional chars history
This function uses the minibuffer to read and return a single
character. Optionally, it ignores any input that is not a member
of CHARS, a list of accepted characters. The HISTORY argument
specifies the history list symbol to use; if it is omitted or
‘nil’, this function doesn’t use the history.
If you bind ‘help-form’ to a non-‘nil’ value while calling
‘read-char-from-minibuffer’, then pressing ‘help-char’ causes it to
evaluate ‘help-form’ and display the result.
-- Function: bignump object
This predicate tests whether its argument is a large integer, and
returns ‘t’ if so, ‘nil’ otherwise. Unlike small integers, large
integers can be ‘=’ or ‘eql’ even if they are not ‘eq’.
-- Function: fixnump object
This predicate tests whether its argument is a small integer, and
returns ‘t’ if so, ‘nil’ otherwise. Small integers can be compared
with ‘eq’.
-- Special Form: with-suppressed-warnings warnings body...
In execution, this is equivalent to ‘(progn BODY...)’, but the
compiler does not issue warnings for the specified conditions in
BODY. WARNINGS is an association list of warning symbols and
function/variable symbols they apply to. For instance, if you wish
to call an obsolete function called ‘foo’, but want to suppress the
compilation warning, say:
(with-suppressed-warnings ((obsolete foo))
(foo ...))
-- Function: proper-list-p object
This function returns the length of OBJECT if it is a proper list,
‘nil’ otherwise (*note (elisp)Cons Cells::). In addition to
satisfying ‘listp’, a proper list is neither circular nor dotted.
(proper-list-p '(a b c)) ⇒ 3
(proper-list-p '(a b . c)) ⇒ nil
*Note (elisp)List-related Predicates::.
-- Function: string-distance string1 string2 &optional bytecompare
This function returns the _Levenshtein distance_ between the source
string STRING1 and the target string STRING2. The Levenshtein
distance is the number of single-character changes—deletions,
insertions, or replacements—required to transform the source string
into the target string; it is one possible definition of the _edit
distance_ between strings.
Letter-case of the strings is significant for the computed
distance, but their text properties are ignored. If the optional
argument BYTECOMPARE is non-‘nil’, the function calculates the
distance in terms of bytes instead of characters. The byte-wise
comparison uses the internal Emacs representation of characters, so
it will produce inaccurate results for multibyte strings that
include raw bytes (*note (elisp)Text Representations::); make the
strings unibyte by encoding them (*note (elisp)Explicit Encoding::)
if you need accurate results with raw bytes.
*Note (elisp)Text Comparison::.
-- Macro: ignore-errors body...
This construct executes BODY, ignoring any errors that occur during
its execution. If the execution is without error, ‘ignore-errors’
returns the value of the last form in BODY; otherwise, it returns
‘nil’.
Here’s the example at the beginning of this subsection rewritten
using ‘ignore-errors’:
(ignore-errors (delete-file filename))
*Note (elisp)Handling Errors::.
-- Macro: dolist-with-progress-reporter (var count [result])
reporter-or-message body...
This is another convenience macro that works the same way as
‘dolist’ does, but also reports loop progress using the functions
described above. As in ‘dotimes-with-progress-reporter’,
‘reporter-or-message’ can be a progress reporter or a string. You
can rewrite the previous example with this macro as follows:
(dolist-with-progress-reporter (k (number-sequence 0 500)) "Collecting
some mana for Emacs..." (sit-for 0.01))
*Note (elisp)Progress::.
-- Function: flatten-tree tree
This function returns a “flattened” copy of TREE, that is, a list
containing all the non-‘nil’ terminal nodes, or leaves, of the tree
of cons cells rooted at TREE. Leaves in the returned list are in
the same order as in TREE.
(flatten-tree '(1 (2 . 3) nil (4 5 (6)) 7)) ⇒(1 2 3 4 5 6 7)
*Note (elisp)Building Lists::.
-- Function: xor condition1 condition2
This function returns the boolean exclusive-or of CONDITION1 and
CONDITION2. That is, ‘xor’ returns ‘nil’ if either both arguments
are ‘nil’, or both are non-‘nil’. Otherwise, it returns the value
of that argument which is non-‘nil’.
Note that in contrast to ‘or’, both arguments are always evaluated.
*Note (elisp)Combining Conditions::.
-- Variable: regexp-unmatchable
This variable contains a regexp that is guaranteed not to match any
string at all. It is particularly useful as default value for
variables that may be set to a pattern that actually matches
something.
*Note (elisp)Regexp Functions::
-- Function: decoded-time-second time
Return the SECONDS field of a ‘decoded-time’ record TIME. It can
also be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: decoded-time-minute time
Return the MINUTE field of a ‘decoded-time’ record TIME. It can
also be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: decoded-time-hour time
Return the HOUR field of a ‘decoded-time’ record TIME. It can also
be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: decoded-time-day time
Return the DAY field of a ‘decoded-time’ record TIME. It can also
be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: decoded-time-month time
Return the MONTH field of a ‘decoded-time’ record TIME. It can
also be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: decoded-time-year time
Return the YEAR field of a ‘decoded-time’ record TIME. It can also
be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: decoded-time-weekday time
Return the WEEKDAY field of a ‘decoded-time’ record TIME. It can
also be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: decoded-time-dst time
Return the DST (daylight saving time indicator) field of a
‘decoded-time’ record TIME. It can also be used as a *note
Generalized Variables: (elisp)generalised variable.
-- Function: decoded-time-zone time
Return the ZONE field of a ‘decoded-time’ record TIME. It can also
be used as a *note Generalized Variables: (elisp)generalised
variable.
-- Function: package-get-version
Return the version number of the package in which this is used.
-- Function: time-equal-p t1 t2
This returns ‘t’ if the two time values T1 and T2 are equal.
*Note (elisp)Time Calculations::.
-- Function: date-days-in-month year month
Return the number of days in MONTH in YEAR. For instance, February
2020 has 29 days.
*Note (elisp)Time Calculations::. This function requires the
‘time-date’ feature to be loaded.
-- Function: date-ordinal-to-time year ordinal
Convert a YEAR/ORDINAL to the equivalent decoded-time structure.
ORDINAL is the number of days since the start of the year, with
January 1st being 1.
*Note (elisp)Time Calculations::. This function requires the
‘time-date’ feature to be loaded.
-- User Option: exec-path
The value of this variable is a list of directories to search for
programs to run in subprocesses. Each element is either the name
of a directory (i.e., a string), or ‘nil’, which stands for the
default directory (which is the value of ‘default-directory’).
*Note executable-find: (elisp)Locating Files, for the details of
this search.
The value of ‘exec-path’ is used by ‘call-process’ and
‘start-process’ when the PROGRAM argument is not an absolute file
name.
Generally, you should not modify ‘exec-path’ directly. Instead,
ensure that your ‘PATH’ environment variable is set appropriately
before starting Emacs. Trying to modify ‘exec-path’ independently
of ‘PATH’ can lead to confusing results.
*Note (elisp)Subprocess Creation::.
-- Function: provided-mode-derived-p mode &rest modes
This function returns non-‘nil’ if MODE is derived from any of the
major modes given by the symbols MODES.
-- Function: file-size-human-readable-iec size
Human-readable string for SIZE bytes, using IEC prefixes.
-- Function: make-empty-file filename &optional parents
This function creates an empty file named FILENAME. As
‘make-directory’, this function creates parent directories if
PARENTS is non-‘nil’. If FILENAME already exists, this function
signals an error.
-- Function: text-property-search-forward prop &optional value
predicate not-current
Search for the next region that has text property PROP set to VALUE
according to PREDICATE.
This function is modeled after ‘search-forward’ and friends in that
it moves point, but it returns a structure that describes the match
instead of returning it in ‘match-beginning’ and friends.
If the text property can’t be found, the function returns ‘nil’.
If it’s found, point is placed at the end of the region that has
this text property match, and a ‘prop-match’ structure is returned.
PREDICATE can either be ‘t’ (which is a synonym for ‘equal’), ‘nil’
(which means “not equal”), or a predicate that will be called with
two parameters: The first is VALUE, and the second is the value of
the text property we’re inspecting.
If NOT-CURRENT, if point is in a region where we have a match, then
skip past that and find the next instance instead.
The ‘prop-match’ structure has the following accessors:
‘prop-match-beginning’ (the start of the match), ‘prop-match-end’
(the end of the match), and ‘prop-match-value’ (the value of
PROPERTY at the start of the match).
In the examples below, imagine that you’re in a buffer that looks
like this:
This is a bold and here's bolditalic and this is the end.
That is, the “bold” words are the ‘bold’ face, and the “italic”
word is in the ‘italic’ face.
With point at the start:
(while (setq match (text-property-search-forward 'face 'bold t))
(push (buffer-substring (prop-match-beginning match)
(prop-match-end match))
words))
This will pick out all the words that use the ‘bold’ face.
(while (setq match (text-property-search-forward 'face nil t))
(push (buffer-substring (prop-match-beginning match)
(prop-match-end match))
words))
This will pick out all the bits that have no face properties, which
will result in the list ‘("This is a " "and here's " "and this is
the end")’ (only reversed, since we used ‘push’).
(while (setq match (text-property-search-forward 'face nil nil))
(push (buffer-substring (prop-match-beginning match)
(prop-match-end match))
words))
This will pick out all the regions where ‘face’ is set to
something, but this is split up into where the properties change,
so the result here will be ‘("bold" "bold" "italic")’.
For a more realistic example where you might use this, consider
that you have a buffer where certain sections represent URLs, and
these are tagged with ‘shr-url’.
(while (setq match (text-property-search-forward 'shr-url nil nil))
(push (prop-match-value match) urls))
This will give you a list of all those URLs.
*Note (Property Search)elisp::.
-- Function: text-property-search-backward prop &optional value
predicate not-current
This is just like ‘text-property-search-forward’, but searches
backward instead. Point is placed at the beginning of the matched
region instead of the end, though.
*Note (Property Search)elisp::.
2.3.2 Extended Definitions
--------------------------
These functions must be called explicitly via ‘compat-call’, since their
calling convention or behavior was extended in Emacs 27.1:
-- Function: compat-call recenter &optional count redisplay
This function scrolls the text in the selected window so that point
is displayed at a specified vertical position within the window.
It does not move point with respect to the text.
*Note (elisp)Textual Scrolling::.
This compatibility version adds support for the optional argument
REDISPLAY.
-- Function: compat-call lookup-key keymap key &optional
accept-defaults
This function returns the definition of KEY in KEYMAP. If the
string or vector KEY is not a valid key sequence according to the
prefix keys specified in KEYMAP, it must be too long and have extra
events at the end that do not fit into a single key sequence. Then
the value is a number, the number of events at the front of KEY
that compose a complete key.
*Note (elisp)Low-Level Key Binding::.
This compatibility version allows for KEYMAP to be a list of
keymaps, instead of just a singular keymap.
-- Macro: compat-call setq-local &rest pairs
PAIRS is a list of variable and value pairs. This macro creates a
buffer-local binding in the current buffer for each of the
variables, and gives them a buffer-local value. It is equivalent
to calling ‘make-local-variable’ followed by ‘setq’ for each of the
variables. The variables should be unquoted symbols.
(setq-local var1 "value1"
var2 "value2")
*Note (elisp)Creating Buffer-Local::.
This compatibility version allows for more than one variable to be
set at once, as can be done with ‘setq’.
-- Function: compat-call regexp-opt strings &optional paren
This function returns an efficient regular expression that will
match any of the strings in the list STRINGS. This is useful when
you need to make matching or searching as fast as possible—for
example, for Font Lock mode.
*Note (elisp)Regexp Functions::.
The compatibility version of this functions handles the case where
STRINGS in an empty list. In that case, a regular expression is
generated that never matches anything (see ‘regexp-unmatchable’).
-- Function: compat-call file-size-human-readable file-size &optional
flavor space unit
Return a string with a human readable representation of FILE-SIZE.
The optional second argument FLAVOR controls the units and the
display format. If FLAVOR is...
• ‘si’, each kilobyte is 1000 bytes and the produced suffixes
are ‘k’, ‘M’, ‘G’, ‘T’, etc.
• ‘iec’, each kilobyte is 1024 bytes and the produced suffixes
are ‘KiB’, ‘MiB’, ‘GiB’, ‘TiB’, etc.
• ‘nil’ or omitted, each kilobyte is 1024 bytes and the produced
suffixes are ‘k’, ‘M’, ‘G’, ‘T’, etc.
The compatibility version handles the optional third (SPACE) and
forth (UNIT) arguments. The argument SPACE can be a string that is
placed between the number and the unit. The argument UNIT
determines the unit to use. By default it will be an empty string,
unless FLAVOR is ‘iec’, in which case it will be ‘B’.
-- Function: compat-call assoc-delete-all key alist &optional test
This function is like ‘assq-delete-all’ except that it accepts an
optional argument TEST, a predicate function to compare the keys in
ALIST. If omitted or ‘nil’, TEST defaults to ‘equal’. As
‘assq-delete-all’, this function often modifies the original list
structure of ALIST.
*Note (elisp)Association Lists::.
This compatibility version handles the optional third (TESTFN)
argument.
-- Function: compat-call executable-find program &optional remote
This function searches for the executable file of the named PROGRAM
and returns the absolute file name of the executable, including its
file-name extensions, if any. It returns ‘nil’ if the file is not
found. The function searches in all the directories in
‘exec-path’, and tries all the file-name extensions in
‘exec-suffixes’ (*note (elisp)Subprocess Creation::).
If REMOTE is non-‘nil’, and ‘default-directory’ is a remote
directory, PROGRAM is searched on the respective remote host.
*Note (elisp)Locating Files::.
This compatibility version adds support to handle the optional
second (REMOTE) argument.
2.3.3 Missing Definitions
-------------------------
Compat does not provide support for the following Lisp features
implemented in 27.1:
• The functions ‘base64url-encode-*’.
• The function ‘decoded-time-add’.
• The function ‘decoded-time-set-defaults’.
• The function ‘time-convert’.
• The macro ‘benchmark-progn’.
• Support for ‘condition-case’ to handle t.
• The function ‘file-system-info’.
• The function ‘group-name’.
• The function ‘face-extend-p’ and ‘set-face-extend’.
• Additional ‘format-spec’ modifiers.
• Support for additional body forms for
‘define-globalized-minor-mode’.
• The macro ‘with-connection-local-variables’ and related
functionality.
• The ‘iso8601’ library.
• The ‘exif’ library.
• The ‘image-converter’ library.

File: doc0jZUSv.info, Node: Emacs 28.1, Next: Emacs 29.1, Prev: Emacs 27.1, Up: Support
2.4 Emacs 28.1
==============
2.4.1 Added Definitions
-----------------------
The following functions and macros are implemented in Emacs 28.1. These
functions are made available by Compat on Emacs versions older than
28.1.
The ‘defcustom’ type ‘natnum’ introduced in Emacs 28.1 is made
available by Compat.
-- Function: process-lines-ignore-status program &rest args
This function is just like ‘process-lines’, but does not signal an
error if PROGRAM exits with a non-zero exit status.
-- Function: process-lines-handling-status program status-handler &rest
args
Execute PROGRAM with ARGS, returning its output as a list of lines.
If STATUS-HANDLER is non-nil, it must be a function with one
argument, which will be called with the exit status of the program
before the output is collected. If STATUS-HANDLER is nil, an error
is signaled if the program returns with a non-zero exit status.
-- Function: text-quoting-style
You should not read the value of the variable ‘text-quoting-style’
directly. Instead, use this function with the same name to
dynamically compute the correct quoting style on the current
terminal in the ‘nil’ case described above.
-- Function: string-search needle haystack &optional start-pos
Return the position of the first instance of NEEDLE in HAYSTACK,
both of which are strings. If START-POS is non-‘nil’, start
searching from that position in NEEDLE. Return ‘nil’ if no match
was found. This function only considers the characters in the
strings when doing the comparison; text properties are ignored.
Matching is always case-sensitive.
-- Function: length= sequence length
Return non-‘nil’ if the length of SEQUENCE is equal to LENGTH.
-- Function: length< sequence length
Return non-‘nil’ if SEQUENCE is shorter than LENGTH. This may be
more efficient than computing the length of SEQUENCE if SEQUENCE is
a long list.
-- Function: length> sequence length
Return non-‘nil’ if SEQUENCE is longer than LENGTH.
-- Function: file-name-concat directory &rest components
Concatenate COMPONENTS to DIRECTORY, inserting a slash before the
components if DIRECTORY or the preceding component didn’t end with
a slash.
(file-name-concat "/tmp" "foo") ⇒ "/tmp/foo"
A DIRECTORY or components that are ‘nil’ or the empty string are
ignored—they are filtered out first and do not affect the results
in any way.
This is almost the same as using ‘concat’, but DIRNAME (and the
non-final components) may or may not end with slash characters, and
this function will not double those characters.
-- Function: garbage-collect-maybe factor
Suggest to run garbage collection, if _enough_ data has been
allocated. This is determined by the positive numerical argument
FACTOR, that would proportionally increase the likelihood of
garbage collection taking place.
This compatibility function does nothing and ignores any
suggestion.
-- Function: string-replace from-string to-string in-string
This function replaces all occurrences of FROM-STRING with
TO-STRING in IN-STRING and returns the result. It may return one
of its arguments unchanged, a constant string or a new string.
Case is significant, and text properties are ignored.
-- Function: always &rest arguments
This function ignores any ARGUMENTS and returns ‘t’.
*Note (elisp)Calling Functions::.
-- Function: make-separator-line &optional length
Make a string appropriate for usage as a visual separator line. If
LENGTH is nil, use the window width.
-- Function: insert-into-buffer to-buffer &optional start end
This is like ‘insert-buffer-substring’, but works in the opposite
direction: The text is copied from the current buffer into
TO-BUFFER. The block of text is copied to the current point in
TO-BUFFER, and point (in that buffer) is advanced to after the end
of the copied text. Is ‘start’/‘end’ is ‘nil’, the entire text in
the current buffer is copied over.
*Note (elisp)Insertion::.
-- Function: replace-string-in-region regexp replacement &optional
start end
This function replaces all the occurrences of REGEXP with
REPLACEMENT in the region of buffer text between START and END;
START defaults to position of point, and END defaults to the last
accessible position of the buffer. The search for REGEXP is
case-sensitive, and REPLACEMENT is inserted without changing its
letter-case. The REPLACEMENT string can use the same special
elements starting with ‘\’ as ‘replace-match’ does. The function
returns the number of replaced occurrences, or ‘nil’ if REGEXP is
not found. The function preserves the position of point.
(replace-regexp-in-region "foo[ \t]+bar" "foobar")
*Note (elisp)Search and Replace::.
-- Function: replace-regexp-in-string string replacement &optional
start end
This function works similarly to ‘replace-regexp-in-region’, but
searches for, and replaces, literal STRINGs instead of regular
expressions.
*Note (elisp)Search and Replace::.
-- Function: buffer-local-boundp variable buffer
This returns non-‘nil’ if there’s either a buffer-local binding of
VARIABLE (a symbol) in buffer BUFFER, or VARIABLE has a global
binding.
*Note (elisp)Creating Buffer-Local::.
-- Macro: with-existing-directory body...
This macro ensures that ‘default-directory’ is bound to an existing
directory before executing BODY. If ‘default-directory’ already
exists, that’s preferred, and otherwise some other directory is
used. This macro can be useful, for instance, when calling an
external command that requires that it’s running in a directory
that exists. The chosen directory is not guaranteed to be
writable.
*Note (elisp)Testing Accessibility::.
-- Macro: dlet (bindings...) forms...
This special form is like ‘let’, but it binds all variables
dynamically. This is rarely useful—you usually want to bind normal
variables lexically, and special variables (i.e., variables that
are defined with ‘defvar’) dynamically, and this is what ‘let’
does.
‘dlet’ can be useful when interfacing with old code that assumes
that certain variables are dynamically bound (*note (elisp)Dynamic
Binding::), but it’s impractical to ‘defvar’ these variables.
‘dlet’ will temporarily make the bound variables special, execute
the forms, and then make the variables non-special again.
*Note (elisp)Local Variables::.
-- Function: ensure-list object
This function returns OBJECT as a list. If OBJECT is already a
list, the function returns it; otherwise, the function returns a
one-element list containing OBJECT.
This is usually useful if you have a variable that may or may not
be a list, and you can then say, for instance:
(dolist (elem (ensure-list foo))
(princ elem))
*Note (elisp)Building Lists::.
-- Function: string-clean-whitespace string
Clean up the whitespace in STRING by collapsing stretches of
whitespace to a single space character, as well as removing all
whitespace from the start and the end of STRING.
*Note (elisp)Creating Strings::.
-- Function: string-fill string length
Attempt to Word-wrap STRING so that no lines are longer than
LENGTH. Filling is done on whitespace boundaries only. If there
are individual words that are longer than LENGTH, these will not be
shortened.
*Note (elisp)Creating Strings::.
-- Function: string-lines string &optional omit-nulls
Split STRING into a list of strings on newline boundaries. If the
optional argument OMIT-NULLS is non-‘nil’, remove empty lines from
the results. Note that this function returns trailing newlines on
Emacs 28, use ‘compat-call string-lines’ instead if you want
consistent behavior.
-- Function: string-pad string length &optional padding start
Pad STRING to be of the given LENGTH using PADDING as the padding
character. PADDING defaults to the space character. If STRING is
longer than LENGTH, no padding is done. If START is ‘nil’ or
omitted, the padding is appended to the characters of STRING, and
if it’s non-‘nil’, the padding is prepended to STRING’s characters.
*Note (elisp)Creating Strings::.
-- Function: string-chop-newline string
Remove the final newline, if any, from STRING.
*Note (elisp)Creating Strings::.
-- Macro: named-let name bindings &rest body
This special form is a looping construct inspired from the Scheme
language. It is similar to ‘let’: It binds the variables in
BINDINGS, and then evaluates BODY. However, ‘named-let’ also binds
NAME to a local function whose formal arguments are the variables
in BINDINGS and whose body is BODY. This allows BODY to call
itself recursively by calling NAME, where the arguments passed to
NAME are used as the new values of the bound variables in the
recursive invocation.
Recursive calls to NAME that occur in _tail positions_ in BODY are
guaranteed to be optimized as _tail calls_, which means that they
will not consume any additional stack space no matter how deeply
the recursion runs. Such recursive calls will effectively jump to
the top of the loop with new values for the variables.
*Note (elisp)Local Variables::.
-- Function: file-name-with-extension filename extension
This function returns FILENAME with its extension set to EXTENSION.
A single leading dot in the EXTENSION will be stripped if there is
one. For example:
(file-name-with-extension "file" "el")
⇒ "file.el"
(file-name-with-extension "file" ".el")
⇒ "file.el"
(file-name-with-extension "file.c" "el")
⇒ "file.el"
Note that this function will error if FILENAME or EXTENSION are
empty, or if the FILENAME is shaped like a directory (i.e., if
‘directory-name-p’ returns non-‘nil’).
*Note File Name Components: (elisp)File Name Components.
-- Function: directory-empty-p directory
This utility function returns ‘t’ if given DIRECTORY is an
accessible directory and it does not contain any files, i.e., is an
empty directory. It will ignore ‘.’ and ‘..’ on systems that
return them as files in a directory.
Symbolic links to directories count as directories. See
FILE-SYMLINK-P to distinguish symlinks.
*Note (elisp)Contents of Directories::.
-- Function: format-prompt prompt default &rest format-args
Format PROMPT with default value DEFAULT according to the
‘minibuffer-default-prompt-format’ variable.
‘minibuffer-default-prompt-format’ is a format string (defaulting
to ‘" (default %s)"’ that says how the “default” bit in prompts
like ‘"Local filename (default somefile): "’ are to be formatted.
To allow the users to customize how this is displayed, code that
prompts the user for a value (and has a default) should look
something along the lines of this code snippet:
(read-file-name
(format-prompt "Local filename" file)
nil file)
If FORMAT-ARGS is ‘nil’, PROMPT is used as a literal string. If
FORMAT-ARGS is non-‘nil’, PROMPT is used as a format control
string, and PROMPT and FORMAT-ARGS are passed to ‘format’ (*note
(elisp)Formatting Strings::).
‘minibuffer-default-prompt-format’ can be ‘""’, in which case no
default values are displayed.
If DEFAULT is ‘nil’, there is no default value, and therefore no
“default value” string is included in the result value. If DEFAULT
is a non-‘nil’ list, the first element of the list is used in the
prompt.
*Note (elisp)Text from Minibuffer::.
-- Function: thing-at-mouse event thing &optional no-properties
Mouse-EVENT equivalent of ‘thing-at-point’. THING can be ‘symbol’,
‘list’, ‘sexp’, ‘filename’, ‘url’, ... among other things.
When NO-PROPERTIES has a non-‘nil’ value, any text properties that
might have been present in the buffer are stripped away.
-- Function: bounds-of-thing-at-mouse event thing
Determine start and end locations for THING at mouse click given by
EVENT. Like ‘bounds-of-thing-at-point’, but tries to use the
position in EVENT where the mouse button is clicked to find the
thing nearby.
-- Function: mark-thing-at-mouse click thing
Activate the region around THING found near the mouse CLICK.
-- Function: macroexp-file-name
Return the name of the file in which the code is currently being
evaluated, or ‘nil’ if it cannot be determined.
-- Function: macroexp-warn-and-return msg form &optional category
compile-only arg
Return code equivalent to ‘form’ labeled with warning ‘msg’.
-- Macro: with-environment-variables variables body...
This macro sets the environment variables according to VARIABLES
temporarily when executing BODY. The previous values are restored
when the form finishes. The argument VARIABLES should be a list of
pairs of strings of the form ‘(VAR VALUE)’, where VAR is the name
of the environment variable and VALUE is that variable’s value.
(with-environment-variables (("LANG" "C")
("LANGUAGE" "en_US:en"))
(call-process "ls" nil t))
*Note System Environment: (elisp)System Environment.
-- Function: color-dark-p rgb
Whether RGB is more readable against white than black. RGB is a
3-element list (R G B), each component in the range [0,1]. This
predicate can be used both for determining a suitable (black or
white) contrast color with RGB as background and as foreground.
-- Function: color-values-from-color-spec spec
Convert the textual color specification SPEC to a color triple
‘(RED GREEN blue)’. Each of RED, GREEN and ‘blue’ is a integer
value between 0 and 65535.
The specification SPEC can be one of the following
• ‘#RGB’, where R, G and B are hex numbers of equal length, 1-4
digits each.
• ‘rgb:R/G/B’, where R, G, and B are hex numbers, 1-4 digits
each.
• ‘rgbi:R/G/B’, where R, G and B are floating-point numbers in
[0,1].
-- Function: file-modes-number-to-symbolic modes
This function converts a numeric file mode specification in MODES
into the equivalent symbolic form.
*Note Changing Files: (elisp)Changing Files.
-- Function: file-backup-file-names filename
This function returns a list of all the backup file names for
FILENAME, or ‘nil’ if there are none. The files are sorted by
modification time, descending, so that the most recent files are
first.
*Note (elisp)Backup Names::.
-- Function: make-lock-file-name filename
Return a string containing a lock file name for FILENAME, obeying
‘lock-file-name-transforms’.
-- Function: decoded-time-period time
Interpret TIME as a period and return its length in seconds. For
computational purposes, years are 365 days long and months are 30
days long.
-- Function: subr-primitive-p object
Return ‘t’ if OBJECT is a primitive, built-in function. On systems
with native compilation ‘subrp’ does not distinguish between
built-in functions and functions that have been compiled. If
native compilation is not available, this function behaves
identically to ‘subrp’.
-- Function: subr-native-elisp-p object
Return ‘t’ if OBJECT if the object is native compiled lisp. If
native compilation is not available, this function always returns
‘nil’.
-- Macro: with-window-non-dedicated window &rest body
Evaluate BODY with WINDOW temporarily made non-dedicated. If
WINDOW is nil, use the selected window. Return the value of the
last form in BODY.
2.4.2 Extended Definitions
--------------------------
These functions must be called explicitly via ‘compat-call’, since their
calling convention or behavior was extended in Emacs 28.1:
-- Function: compat-call string-width string &optional from to
This function returns the width in columns of the string STRING, if
it were displayed in the current buffer and the selected window.
Optional arguments FROM and TO specify the substring of STRING to
consider, and are interpreted as in ‘substring’ (*note
(elisp)Creating Strings::).
The return value is an approximation: it only considers the values
returned by ‘char-width’ for the constituent characters, always
takes a tab character as taking ‘tab-width’ columns, ignores
display properties and fonts, etc.
*Note (elisp)Size of Displayed Text::.
This compatibility version handles the optional arguments FROM and
TO.
-- Function: compat-call count-windows
Return the number of live windows on the selected frame.
The optional argument MINIBUF specifies whether the minibuffer
window is included in the count.
If ALL-FRAMES is non-‘nil’, count the windows in all frames instead
just the selected frame.
This compatibility version handles the optional argument
ALL-FRAMES.
2.4.3 Missing Definitions
-------------------------
Compat does not provide support for the following Lisp features
implemented in 28.1:
• Support for ‘interactive’ or ‘declare’ to list applicable modes.
• Support for ‘:interactive’ argument to ‘define-minor-mode’ and
‘define-derived-mode’.
• Support for ‘:predicate’ argument to
‘define-globalized-minor-mode’.
• Support for the ‘:success’ handler of ‘condition-case’.
• The function ‘benchmark-call’.
• Additional Edebug keywords.
• The libjansson JSON APIs, e.g., ‘json-parse-string’.
• The macro ‘pcase-setq’.
• The function ‘custom-add-choice’.
• The functions ‘dom-print’ and ‘dom-remove-attribute’.
• The function ‘dns-query-asynchronous’.
• The function ‘get-locale-names’.
• The functions ‘mail-header-parse-addresses-lax’ and
‘mail-header-parse-address-lax’.
• The function ‘num-processors’.
• The function ‘object-intervals’.
• The function ‘require-theme’.
• The function ‘syntax-class-to-char’.
• The function ‘path-separator’.
• The function ‘null-device’.
• The function ‘macroexp-compiling-p’.
• The function ‘split-string-shell-command’.
• The function ‘string-limit’.
• The functions ‘innermost-minibuffer-p’ and
‘minibuffer-innermost-command-loop-p’.
• The function ‘max-mini-window-lines’.
• The function ‘lock-file’ and ‘unlock-file’.
• The ‘multisession’ library.

File: doc0jZUSv.info, Node: Emacs 29.1, Prev: Emacs 28.1, Up: Support
2.5 Emacs 29.1
==============
2.5.1 Added Definitions
-----------------------
The following functions and macros are implemented in Emacs 29.1. These
functions are made available by Compat on Emacs versions older than
29.1. Note that due to upstream changes, it might happen that there
will be the need for changes, so use these functions with care.
The ‘defcustom’ type ‘key’ introduced in Emacs 28.1 is made available
by Compat.
-- Function: count-sentences start end
Count sentences in current buffer from START to END.
-- Function: readablep object
This predicate says whether OBJECT has “readable syntax”, i.e., it
can be written out and then read back by the Emacs Lisp reader. If
it can’t, this function returns ‘nil’; if it can, this function
returns a printed representation (via ‘prin1’).
-- Function: substitute-quotes string
This function works like ‘substitute-command-keys’, but only
replaces quote characters.
-- Function: get-scratch-buffer-create
Return the *scratch* buffer, creating a new one if needed.
-- Function: use-region-noncontiguous-p
Return non-nil for a non-contiguous region if ‘use-region-p’.
-- Function: use-region-end
Return the end of the region if ‘use-region-p’.
-- Function: use-region-beginning
Return the start of the region if ‘use-region-p’.
-- Macro: buffer-local-set-state variable value...
Minor modes often set buffer-local variables that affect some
features in Emacs. When a minor mode is switched off, the mode is
expected to restore the previous state of these variables. This
convenience macro helps with doing that: It works much like
‘setq-local’, but returns an object that can be used to restore
these values back to their previous values/states (using the
companion function ‘buffer-local-restore-state’).
-- Function: delete-line
Delete the current line.
-- Function: list-of-strings-p object
Return ‘t’ if OBJECT is ‘nil’ or a list of strings.
-- Function: plistp object
Non-nil if and only if OBJECT is a valid plist.
-- Macro: with-memoization PLACE CODE...
This macro provides a simple way to do memoization. CODE is
evaluated and then stashed in PLACE. If PLACE’s value is
non-‘nil’, return that value instead of evaluating CODE.
-- Special Form: with-restriction start end [:label label] body
This special form saves the current bounds of the accessible
portion of the buffer, sets the accessible portion to start at
START and end at END, evaluates the BODY forms, and restores the
saved bounds. In that case it is equivalent to
(save-restriction
(narrow-to-region start end)
body)
When the optional argument LABEL, a symbol, is present, the
narrowing is “labeled”. A labeled narrowing differs from a
non-labeled one in several ways:
• During the evaluation of the BODY form, ‘narrow-to-region’ and
‘widen’ can be used only within the START and END limits.
• To lift the restriction introduced by ‘with-restriction’ and
gain access to other portions of the buffer, use
‘without-restriction’ with the same LABEL argument. (Another
way to gain access to other portions of the buffer is to use
an indirect buffer (*note (elisp)Indirect Buffers::).)
• Labeled narrowings can be nested.
• Labeled narrowings can only be used in Lisp programs: they are
never visible on display, and never interfere with narrowings
set by the user.
If you use ‘with-restriction’ with the optional LABEL argument, we
recommend documenting the LABEL in the doc strings of the functions
which use it, so that other Lisp programs your code calls could
lift the labeled narrowing if and when it needs.
-- Special Form: without-restriction [:label label] body
This special form saves the current bounds of the accessible
portion of the buffer, widens the buffer, evaluates the BODY forms,
and restores the saved bounds. In that case it is equivalent to
(save-restriction
(widen)
body)
When the optional argument LABEL is present, the narrowing set by
‘with-restriction’ with the same LABEL argument is lifted.
-- Function: pos-bol &optional count
Like ‘line-beginning-position’, but ignores fields (and is more
efficient).
-- Function: pos-eol &optional count
Like ‘line-end-position’, but ignores fields (and is more
efficient).
-- Macro: with-delayed-message (timeout message) body...
Sometimes it’s unclear whether an operation will take a long time
to execute or not, or it can be inconvenient to implement a
progress reporter. This macro can be used in those situations.
(with-delayed-message (2 (format "Gathering data for %s" entry))
(setq data (gather-data entry)))
In this example, if the body takes more than two seconds to
execute, the message will be displayed. If it takes a shorter time
than that, the message won’t be displayed. In either case, the
body is evaluated as normally, and the return value of the final
element in the body is the return value of the macro.
The MESSAGE element is evaluated before BODY, and is always
evaluated, whether the message is displayed or not.
-- Function: funcall-with-delayed-message timeout message function
Like ‘funcall’, but display MESSAGE if FUNCTION takes longer than
TIMEOUT. TIMEOUT is a number of seconds, and can be an integer or
a floating point number.
If FUNCTION takes less time to execute than TIMEOUT seconds,
MESSAGE is not displayed.
-- Function: buttonize string callback &optional data help-echo
Sometimes it’s more convenient to make a string into a button
without inserting it into a buffer immediately, for instance when
creating data structures that may then, later, be inserted into a
buffer. This function makes STRING into such a string, and
CALLBACK will be called when the user clicks on the button. The
optional DATA parameter will be used as the parameter when CALLBACK
is called. If ‘nil’, the button is used as the parameter instead.
-- Function: buttonize-region start end callback &optional data
help-echo
Make the region between START and END into a button. When clicked,
CALLBACK will be called with the DATA as the function argument. If
DATA isn’t present (or is nil), the button itself will be used
instead as the function argument. If HELP-ECHO, use that as the
help-echo property.
-- Function: get-display-property position prop &optional object
properties
This convenience function can be used to get a specific display
property, no matter whether the ‘display’ property is a vector, a
list or a simple property. This is like ‘get-text-property’ (*note
Examining Properties: (elisp)Examining Properties.), but works on
the ‘display’ property only.
POSITION is the position in the buffer or string to examine, and
PROP is the ‘display’ property to return. The optional OBJECT
argument should be either a string or a buffer, and defaults to the
current buffer. If the optional PROPERTIES argument is non-‘nil’,
it should be a ‘display’ property, and in that case, POSITION and
OBJECT are ignored. (This can be useful if you’ve already gotten
the ‘display’ property with ‘get-char-property’, for instance
(*note Examining Properties: (elisp)Examining Properties.).
-- Function: add-display-text-property start end prop value &optional
object
Add display property PROP with VALUE to the text from START to END.
If any text in the region has a non-nil ‘display’ property, those
properties are retained.
If OBJECT is non-‘nil’, it should be a string or a buffer. If
‘nil’, this defaults to the current buffer.
-- Function: take n list
This function returns the N first elements of LIST. Essentially,
it returns the part of LIST that ‘nthcdr’ skips.
‘take’ returns LIST if shorter than N elements; it returns ‘nil’ if
N is zero or negative.
(take 3 '(a b c d))
⇒ (a b c)
(take 10 '(a b c d))
⇒ (a b c d)
(take 0 '(a b c d))
⇒ nil
-- Function: ntake n list
This is a version of ‘take’ that works by destructively modifying
the list structure of the argument. That makes it faster, but the
original value of LIST may be lost.
‘ntake’ returns LIST unmodified if shorter than N elements; it
returns ‘nil’ if N is zero or negative. Otherwise, it returns LIST
truncated to its first N elements.
This means that it is usually a good idea to use the return value
and not just rely on the truncation effect unless N is known to be
positive.
-- Function: compiled-function-p object
This function returns ‘t’ if OBJECT is a function object that is
not in the form of ELisp source code but something like machine
code or byte code instead. More specifically it returns ‘t’ if the
function is built-in, or byte-compiled, or natively-compiled, or a
function loaded from a dynamic module.
-- Function: function-alias-p object &optional noerror
Checks whether OBJECT is a function alias. If it is, it returns a
list of symbols representing the function alias chain, else ‘nil’.
For instance, if ‘a’ is an alias for ‘b’, and ‘b’ is an alias for
‘c’:
(function-alias-p 'a)
⇒ (b c)
If there’s a loop in the definitions, an error will be signalled.
If NOERROR is non-‘nil’, the non-looping parts of the chain is
returned instead.
-- Function: string-equal-ignore-case string1 string2
‘string-equal-ignore-case’ compares strings ignoring case
differences, like ‘char-equal’ when ‘case-fold-search’ is ‘t’.
*Note (elisp)Text Comparison::.
-- Function: string-split string &optional separators omit-nulls trim
‘string-split’ is an alias for the function ‘split-string’. The
name follows the convention of other string functions.
*Note (elisp)Creating Strings::.
-- Function: buffer-match-p condition buffer-or-name &optional arg
This function checks if a buffer designated by ‘buffer-or-name’
satisfies a ‘condition’. Optional third argument ARG is passed to
the predicate function in CONDITION. A condition can be one of the
following:
• A string, interpreted as a regular expression. The buffer
satisfies the condition if the regular expression matches the
buffer name.
• A predicate function, which should return non-‘nil’ if the
buffer matches. If the function expects one argument, it is
called with BUFFER-OR-NAME as the argument; if it expects 2
arguments, the first argument is BUFFER-OR-NAME and the second
is ARG (or ‘nil’ if ARG is omitted).
• A cons-cell ‘(OPER . EXPR)’ where OPER is one of
‘not’
Satisfied if EXPR doesn’t satisfy ‘buffer-match-p’ with
the same buffer and ‘arg’.
‘or’
Satisfied if EXPR is a list and _any_ condition in EXPR
satisfies ‘buffer-match-p’, with the same buffer and
‘arg’.
‘and’
Satisfied if EXPR is a list and _all_ conditions in EXPR
satisfy ‘buffer-match-p’, with the same buffer and ‘arg’.
‘derived-mode’
Satisfied if the buffer’s major mode derives from EXPR.
‘major-mode’
Satisfied if the buffer’s major mode is equal to EXPR.
Prefer using ‘derived-mode’ instead when both can work.
• t Satisfied by any buffer. A convenient alternative to ‘""’
(empty string), ‘(and)’ (empty conjunction) or ‘always’.
*Note (elisp)Buffer List::.
-- Function: match-buffers condition &optional buffers arg
This function returns a list of all buffers that satisfy a
‘condition’, as defined for ‘buffer-match-p’. By default all
buffers are considered, but this can be restricted via the second
optional ‘buffer-list’ argument. Optional third argument ARG will
be used by CONDITION in the same way as ‘buffer-match-p’ does.
*Note (elisp)Buffer List::.
-- Function: string-glyph-split string
When character compositions are in effect, sequence of characters
can be composed for display to form _grapheme clusters_, for
example to display accented characters, or ligatures, or Emoji, or
when complex text shaping requires that for some scripts. When
that happens, characters no longer map in a simple way to display
columns, and display layout decisions with such strings, such as
truncating too wide strings, can be a complex job. This function
helps in performing suvh jobs: it splits up its argument STRING
into a list of substrings, where each substring produces a single
grapheme cluster that should be displayed as a unit. Lisp programs
can then use this list to construct visually-valid substrings of
STRING which will look correctly on display, or compute the width
of any substring of STRING by adding the width of its constituents
in the returned list, etc.
For instance, if you want to display a string without the first
glyph, you can say:
(apply #'insert (cdr (string-glyph-split string))))
*Note (elisp)Size of Displayed Text::.
-- Macro: with-buffer-unmodified-if-unchanged &rest body...
Evaluate BODY like ‘progn’, but change buffer-modified status only
if buffer text changes. If the buffer was unmodified before
execution of BODY, and buffer text after execution of BODY is
identical to what it was before, ensure that buffer is still marked
unmodified afterwards.
Note that only changes in the raw byte sequence of the buffer text,
as stored in the internal representation, are monitored for the
purpose of detecting the lack of changes in buffer text. Any other
changes that are normally perceived as "buffer modifications", such
as changes in text properties, ‘buffer-file-coding-system’, buffer
multibyteness, etc. – will not be noticed, and the buffer will
still be marked unmodified, effectively ignoring those changes.
-- Function: file-attribute-file-identifier
Return the fields ‘(inodenum device)’ as a list from attributes
generated by ‘file-attributes’.
*Note (elisp)File Attributes::.
-- Function: file-name-split filename
This function splits a file name into its components, and can be
thought of as the inverse of ‘string-join’ with the appropriate
directory separator. For example,
(file-name-split "/tmp/foo.txt")
⇒ ("" "tmp" "foo.txt")
(string-join (file-name-split "/tmp/foo.txt") "/")
⇒ "/tmp/foo.txt"
-- Function: file-name-parent-directory filename
This function returns the directory name of the parent directory of
FILENAME. If FILENAME is at the root directory of the filesystem,
it returns ‘nil’. A relative FILENAME is assumed to be relative to
‘default-directory’, and the return value will also be relative in
that case. If the return value is non-‘nil’, it ends in a slash.
*Note (elisp)Directory Names::.
-- Function: file-has-changed-p file &optional tag
This function returns non-‘nil’ if the time stamp of FILENAME has
changed since the last call. When called for the first time for
some FILENAME, it records the last modification time and size of
the file, and returns non-‘nil’ when FILENAME exists. Thereafter,
when called for the same FILENAME, it compares the current time
stamp and size with the recorded ones, and returns non-‘nil’ only
if either the time stamp or the size (or both) are different. This
is useful when a Lisp program wants to re-read a file whenever it
changes. With an optional argument TAG, which must be a symbol,
the size and modification time comparisons are limited to calls
with the same tag.
*Note (elisp)File Attributes::.
-- Function: directory-abbrev-make-regexp directory
Create a regexp to match DIRECTORY for ‘directory-abbrev-alist’.
-- Function: directory-abbrev-apply filename
Apply the abbreviations in ‘directory-abbrev-alist’ to FILENAME.
Note that when calling this, you should set ‘case-fold-search’ as
appropriate for the filesystem used for FILENAME.
-- Function: key-valid-p keys
Say whether KEYS is a valid key. A key is a string consisting of
one or more key strokes. The key strokes are separated by single
space characters.
Each key stroke is either a single character, or the name of an
event, surrounded by angle brackets. In addition, any key stroke
may be preceded by one or more modifier keys. Finally, a limited
number of characters have a special shorthand syntax.
Here’s some example key sequences.
‘f’
The key ‘f’.
‘S o m’
A three key sequence of the keys ‘S’, ‘o’ and ‘m’.
‘C-c o’
A two key sequence of the keys ‘c’ with the control modifier
and then the key ‘o’.
‘H-<left>’
The key named "left" with the hyper modifier.
‘M-RET’
The "return" key with a meta modifier.
‘C-M-<space>’
The "space" key with both the control and meta modifiers.
These are the characters that have shorthand syntax: ‘NUL’, ‘RET’,
‘TAB’, ‘LFD’, ‘ESC’, ‘SPC’, ‘DEL’.
Modifiers have to be specified in this order
Alt (A)-Control (C)-Hyper (H)-Meta (M)-Shift (s)-Super (s)
-- Function: key-parse keys
Convert KEYS to the internal Emacs key representation. See
‘key-valid-p’ for a description of valid key sequences. Examples
include ‘f’, ‘C-c C-c’, ‘H-<left>’, ‘M-RET’ or ‘C-M-<return>’.
-- Function: keymap-set keymap key definition
This function sets the binding for KEY in KEYMAP. (If KEY is more
than one event long, the change is actually made in another keymap
reached from KEYMAP.) The argument BINDING can be any Lisp object,
but only certain types are meaningful. (For a list of meaningful
types, see *note (elisp)Key Lookup::.) The value returned by
‘keymap-set’ is BINDING.
If KEY is ‘<t>’, this sets the default binding in KEYMAP. When an
event has no binding of its own, the Emacs command loop uses the
keymap’s default binding, if there is one.
Every prefix of KEY must be a prefix key (i.e., bound to a keymap)
or undefined; otherwise an error is signaled. If some prefix of
KEY is undefined, then ‘keymap-set’ defines it as a prefix key so
that the rest of KEY can be defined as specified.
If there was previously no binding for KEY in KEYMAP, the new
binding is added at the beginning of KEYMAP. The order of bindings
in a keymap makes no difference for keyboard input, but it does
matter for menu keymaps (*note (elisp)Menu Keymaps::).
*Note (elisp)Changing Key Bindings::.
-- Function: keymap-global-set key command
This function sets the binding of KEY in the current global map to
BINDING.
(keymap-global-set KEY BINDING)
≡
(keymap-set (current-global-map) KEY BINDING)
*Note (elisp)Key Binding Commands::.
-- Function: keymap-local-set key command
This function sets the binding of KEY in the current local keymap
to BINDING.
(keymap-local-set KEY BINDING)
≡
(keymap-set (current-local-map) KEY BINDING)
*Note (elisp)Key Binding Commands::.
-- Function: keymap-global-unset key &optional remove
This function removes the binding of KEY from the current global
map.
One use of this function is in preparation for defining a longer
key that uses KEY as a prefix—which would not be allowed if KEY has
a non-prefix binding. For example:
(keymap-global-unset "C-l")
⇒ nil
(keymap-global-set "C-l C-l" 'redraw-display)
⇒ nil
*Note (elisp)Key Binding Commands::.
-- Function: keymap-local-unset key &optional remove
This function removes the binding of KEY from the current local
map.
*Note (elisp)Key Binding Commands::.
-- Function: keymap-substitute keymap olddef newdef &optional oldmap
prefix
Replace OLDDEF with NEWDEF for any keys in KEYMAP now defined as
OLDDEF. In other words, OLDDEF is replaced with NEWDEF wherever it
appears. Alternatively, if optional fourth argument OLDMAP is
specified, we redefine in KEYMAP as NEWDEF those keys that are
defined as OLDDEF in OLDMAP.
-- Function: keymap-lookup keymap key &optional accept-default no-remap
position
This function returns the definition of KEY in KEYMAP. All the
other functions described in this chapter that look up keys use
‘keymap-lookup’. Here are examples:
(keymap-lookup (current-global-map) "C-x C-f")
⇒ find-file
(keymap-lookup (current-global-map) "C-x C-f 1 2 3 4 5")
⇒ 2
*Note (elisp)Functions for Key Lookup::.
-- Function: keymap-local-lookup keys &optional accept-default
Like ‘keymap-lookup’, but restricting the search for commands bound
to KEYS to the current local keymap.
-- Function: keymap-global-lookup keys &optional accept-default
Like ‘keymap-lookup’, but restricting the search for commands bound
to KEYS to the current global keymap.
-- Function: define-keymap &rest definitions
You can create a keymap with the functions described above, and
then use ‘keymap-set’ (*note (elisp)Changing Key Bindings::) to
specify key bindings in that map. When writing modes, however, you
frequently have to bind a large number of keys at once, and using
‘keymap-set’ on them all can be tedious and error-prone. Instead
you can use ‘define-keymap’, which creates a keymap and binds a
number of keys. Here’s a very basic example:
(define-keymap
"n" #'forward-line
"f" #'previous-line
"C-c C-c" #'quit-window)
This function creates a new sparse keymap, defines the keystrokes
in PAIRS, and returns the new keymap.
PAIRS is a list of alternating key bindings and key definitions, as
accepted by ‘keymap-set’. In addition, the key can be the special
symbol ‘:menu’, in which case the definition should be a menu
definition as accepted by ‘easy-menu-define’ (*note (elisp)Easy
Menu::). Here’s a brief example of this usage:
(define-keymap :full t
"g" #'eww-reload
:menu '("Eww"
["Exit" quit-window t]
["Reload" eww-reload t]))
A number of keywords can be used before the key/definition pairs to
change features of the new keymap. If any of the feature keywords
is missing from the ‘define-keymap’ call, the default value for
that feature is ‘nil’. Here’s a list of the available feature
keywords:
‘:full’
If non-‘nil’, create a char-table keymap (as from
‘make-keymap’) instead of a sparse keymap (as from
‘make-sparse-keymap’ (*note (elisp)Creating Keymaps::). A
sparse keymap is the default.
‘:parent’
If non-‘nil’, the value should be a keymap to use as the
parent (*note (elisp)Inheritance and Keymaps::).
‘:keymap’
If non-‘nil’, the value should be a keymap. Instead of
creating a new keymap, the specified keymap is modified
instead.
‘:suppress’
If non-‘nil’, the keymap will be suppressed with
‘suppress-keymap’ (*note (elisp)Changing Key Bindings::). By
default, digits and the minus sign are exempt from
suppressing, but if the value is ‘nodigits’, this suppresses
digits and minus-sign like it does with other characters.
‘:name’
If non-‘nil’, the value should be a string to use as the menu
for the keymap if you use it as a menu with ‘x-popup-menu’
(*note (elisp)Pop-Up Menus::).
‘:prefix’
If non-‘nil’, the value should be a symbol to be used as a
prefix command (*note (elisp)Prefix Keys::). If this is the
case, this symbol is returned by ‘define-keymap’ instead of
the map itself.
-- Function: defvar-keymap (variable-name &rest defs)
By far, the most common thing to do with a keymap is to bind it to
a variable. This is what virtually all modes do—a mode called
‘foo’ almost always has a variable called ‘foo-mode-map’.
This macro defines NAME as a variable, passes OPTIONS and PAIRS to
‘define-keymap’, and uses the result as the default value for the
variable.
OPTIONS is like the keywords in ‘define-keymap’, but there’s an
additional ‘:doc’ keyword that provides the doc string for the
defined variable.
Here’s an example:
(defvar-keymap eww-textarea-map
:parent text-mode-map
"RET" #'forward-line
"TAB" #'shr-next-link)
-- Macro: while-let spec then-forms...
Like ‘when-let’, but repeat until a binding in SPEC is ‘nil’. The
return value is always ‘nil’.
This is comparable to ‘and-let*’.
-- Macro: ert-with-temp-file name &rest body
Bind NAME to the name of a new temporary file and evaluate BODY.
Delete the temporary file after BODY exits normally or non-locally.
NAME will be bound to the file name of the temporary file. See the
docstring for supported keyword arguments.
-- Macro: ert-with-temp-directory name &rest body
Bind NAME to the name of a new temporary directory and evaluate
BODY. Delete the temporary directory after BODY exits normally or
non-locally.
NAME is bound to the directory name, not the directory file name.
(In other words, it will end with the directory delimiter; on
Unix-like systems, it will end with "/".)
The same keyword arguments are supported as in ‘ert-with-temp-file’
(which see), except for ‘:text’.
-- Function: cl-constantly value
Return a function that takes any number of arguments, but returns
VALUE.
-- Macro: cl-with-gensyms names... body
This macro expands to code that executes BODY with each of the
variables in NAMES bound to a fresh uninterned symbol, or “gensym”,
in Common Lisp parlance. For macros requiring more than one
gensym, use of ‘cl-with-gensyms’ shortens the code and renders
one’s intentions clearer. Compare:
(defmacro my-macro (foo)
(let ((bar (gensym "bar"))
(baz (gensym "baz"))
(quux (gensym "quux")))
`(let ((,bar (+ ...)))
...)))
(defmacro my-macro (foo)
(cl-with-gensyms (bar baz quux)
`(let ((,bar (+ ...)))
...)))
-- Macro: cl-once-only ((variable form)...) body
This macro is primarily to help the macro programmer ensure that
forms supplied by the user of the macro are evaluated just once by
its expansion even though the result of evaluating the form is to
occur more than once. Less often, this macro is used to ensure
that forms supplied by the macro programmer are evaluated just
once.
Each VARIABLE may be used to refer to the result of evaluating FORM
in BODY. ‘cl-once-only’ binds each VARIABLE to a fresh uninterned
symbol during the evaluation of BODY. Then, ‘cl-once-only’ wraps
the final expansion in code to evaluate each FORM and bind the
result to the corresponding uninterned symbol. Thus, when the
macro writer substitutes the value for VARIABLE into the expansion
they are effectively referring to the result of evaluating FORM,
rather than FORM itself. Another way to put this is that each
VARIABLE is bound to an expression for the (singular) result of
evaluating FORM.
The most common case is where VARIABLE is one of the arguments to
the macro being written, so ‘(variable variable)’ may be
abbreviated to just ‘variable’.
For example, consider this macro:
(defmacro my-list (x y &rest forms)
(let ((x-result (gensym))
(y-result (gensym)))
`(let ((,x-result ,x)
(,y-result ,y))
(list ,x-result ,y-result ,x-result ,y-result
(progn ,@forms))))
In a call like ‘(my-list (pop foo) ...)’ the intermediate binding
to ‘x-result’ ensures that the ‘pop’ is not done twice. But as a
result the code is rather complex: the reader must keep track of
how ‘x-result’ really just means the first parameter of the call to
the macro, and the required use of multiple gensyms to avoid
variable capture by ‘(progn ,@forms)’ obscures things further.
‘cl-once-only’ takes care of these details:
(defmacro my-list (x y &rest forms)
(cl-once-only (x y)
`(list ,x ,y ,x ,y
(progn ,@forms))))
2.5.2 Extended Definitions
--------------------------
These functions must be called explicitly via ‘compat-call’, since their
calling convention or behavior was extended in Emacs 29.1:
-- Function: compat-call set-transient-map keymap &optional keep-pred
on-exit message timeout
This function adds KEYMAP as a “transient” keymap, which takes
precedence over other keymaps for one (or more) subsequent keys.
Normally, KEYMAP is used just once, to look up the very next key.
If the optional argument KEEP-PRED is ‘t’, the map stays active as
long as the user types keys defined in KEYMAP; when the user types
a key that is not in KEYMAP, the transient keymap is deactivated
and normal key lookup continues for that key.
The KEEP-PRED argument can also be a function. In that case, the
function is called with no arguments, prior to running each
command, while KEYMAP is active; it should return non-‘nil’ if
KEYMAP should stay active.
The optional argument ON-EXIT, if non-‘nil’, specifies a function
that is called, with no arguments, after KEYMAP is deactivated.
The optional argument MESSAGE specifies the message to display
after activating the transient map. If MESSAGE is a string, it is
the format string for the message, and any ‘%k’ specifier in that
string is replaced with the list of keys from the transient map.
Any other non-‘nil’ value of MESSAGE stands for the default message
format ‘Repeat with %k’.
If the optional argument TIMEOUT is non-‘nil’, it should be a
number that specifies how many seconds of idle time to wait before
deactivating KEYMAP. The value of the variable
‘set-transient-map-timeout’, if non-‘nil’, overrides the value of
this argument.
This function works by adding and removing KEYMAP from the variable
‘overriding-terminal-local-map’, which takes precedence over all
other active keymaps (*note (Searching Keymaps)elisp::).
-- Function: compat-call string-lines string &optional omit-nulls
keep-newlines
Split STRING into a list of strings on newline boundaries. If the
optional argument OMIT-NULLS is non-‘nil’, remove empty lines from
the results. If the optional argument KEEP-NEWLINES is non-‘nil’,
don’t remove the trailing newlines from the result strings.
*Note (elisp)Creating Strings::.
-- Function: compat-call define-key
This function is like ‘keymap-set’ (*note (elisp)Changing Key
Bindings::, but understands only the legacy key syntaxes.
In addition, this function also has a REMOVE argument. If it is
non-‘nil’, the definition will be removed. This is almost the same
as setting the definition to ‘nil’, but makes a difference if the
KEYMAP has a parent, and KEY is shadowing the same binding in the
parent. With REMOVE, subsequent lookups will return the binding in
the parent, whereas with a ‘nil’ definition the lookups will return
‘nil’.
*Note (elisp)Low-Level Key Binding::.
This compatibility version handles the optional argument REMOVE.
-- Function: compat-call plist-get plist prop &optional predicate
This returns the value of the PROPERTY property stored in the
property list PLIST. Comparisons are done with PREDICATE, and
defaults to ‘eq’. It accepts a malformed PLIST argument. If
PROPERTY is not found in the PLIST, it returns ‘nil’.
*Note (elisp)Plist Access::.
This compatibility version handles the optional argument PREDICATE.
This is a generalized variable (*note (elisp)Generalized
Variables::) that can be used to change a value with ‘setf’.
-- Function: compat-call plist-put plist prop val &optional predicate
This stores VALUE as the value of the PROPERTY property in the
property list PLIST. Comparisons are done with PREDICATE, and
defaults to ‘eq’. It may modify PLIST destructively, or it may
construct a new list structure without altering the old. The
function returns the modified property list, so you can store that
back in the place where you got PLIST.
*Note (elisp)Plist Access::.
This compatibility version handles the optional argument PREDICATE.
-- Function: compat-call plist-member plist prop &optional predicate
This returns non-‘nil’ if PLIST contains the given PROPERTY.
Comparisons are done with PREDICATE, and defaults to ‘eq’. Unlike
‘plist-get’, this allows you to distinguish between a missing
property and a property with the value ‘nil’. The value is
actually the tail of PLIST whose ‘car’ is PROPERTY.
*Note (elisp)Plist Access::.
This compatibility version handles the optional argument PREDICATE.
2.5.3 Missing Definitions
-------------------------
Compat does not provide support for the following Lisp features
implemented in 29.1:
• The function ‘imagep’.
• The function ‘image-at-point-p’.
• The function ‘function-documentation’.
• The macro ‘with-undo-amalgamate’.
• The function ‘string-glyph-split’.
• The function ‘string-limit’.
• The function ‘string-pixel-width’ and ‘buffer-text-pixel-size’.
• The function ‘minibuffer-lazy-highlight-setup’.
• The function ‘pp-emacs-lisp-code’.
• The functions ‘xdg-state-home’, ‘xdg-current-desktop’ and
‘xdg-session-type’.
• The macro ‘setopt’.
• The ‘oclosure’ library.
• The ‘textsec’ library.
• The ‘range’ library.
• The ‘string-edit’ library.
• The ‘vtable’ library.
• The ‘pixel-fill’ library.

File: doc0jZUSv.info, Node: Development, Next: Function Index, Prev: Support, Up: Top
3 Development
*************
Compat is developed on GitHub.
Bug reports, patches and comments are best sent to the issue tracker
(https://github.com/emacs-compat/compat/issues). These may include
issues in the compatibility code, missing definitions or performance
issues. We also provide a development mailing list
(https://lists.sr.ht/~pkal/compat-devel) (~pkal/compat-devel@lists.sr.ht
<~pkal/compat-devel@lists.sr.ht>).
Please note that as a GNU ELPA package, Compat requires contributors
to have signed the FSF copyright assignment
(https://www.gnu.org/software/emacs/manual/html_node/emacs/Copyright-Assignment.html),
before any non-trivial contribution (roughly 15 lines of code) can be
applied. It is important that you provide tests when you contribute new
functionality. Compat has 100% test coverage by the test suite. We use
continuous integration to check if patches preserve existing
functionality.

File: doc0jZUSv.info, Node: Function Index, Next: Variable Index, Prev: Development, Up: Top
Appendix A Function Index
*************************
[index]
* Menu:
* add-display-text-property: Emacs 29.1. (line 178)
* alist-get: Emacs 25.1. (line 82)
* always: Emacs 28.1. (line 83)
* and-let*: Emacs 26.1. (line 158)
* assoc-delete-all: Emacs 26.1. (line 13)
* bignump: Emacs 27.1. (line 55)
* bool-vector: Emacs 25.1. (line 178)
* bounds-of-thing-at-mouse: Emacs 28.1. (line 292)
* buffer-hash: Emacs 26.1. (line 80)
* buffer-local-boundp: Emacs 28.1. (line 125)
* buffer-local-restore-state: Emacs 29.1. (line 42)
* buffer-local-set-state: Emacs 29.1. (line 42)
* buffer-match-p: Emacs 29.1. (line 246)
* buttonize: Emacs 29.1. (line 144)
* buttonize-region: Emacs 29.1. (line 153)
* cl-constantly: Emacs 29.1. (line 618)
* cl-once-only: Emacs 29.1. (line 641)
* cl-with-gensyms: Emacs 29.1. (line 622)
* color-dark-p: Emacs 28.1. (line 323)
* color-values-from-color-spec: Emacs 28.1. (line 329)
* compat-call: Usage. (line 43)
* compat-call <1>: Emacs 26.1. (line 278)
* compat-call alist-get: Emacs 26.1. (line 344)
* compat-call assoc: Emacs 26.1. (line 316)
* compat-call assoc-delete-all: Emacs 27.1. (line 417)
* compat-call count-windows: Emacs 28.1. (line 405)
* compat-call define-key: Emacs 29.1. (line 738)
* compat-call executable-find: Emacs 27.1. (line 429)
* compat-call file-size-human-readable: Emacs 27.1. (line 397)
* compat-call line-number-at-pos: Emacs 26.1. (line 330)
* compat-call lookup-key: Emacs 27.1. (line 356)
* compat-call plist-get: Emacs 29.1. (line 754)
* compat-call plist-member: Emacs 29.1. (line 778)
* compat-call plist-put: Emacs 29.1. (line 766)
* compat-call recenter: Emacs 27.1. (line 346)
* compat-call regexp-opt: Emacs 27.1. (line 385)
* compat-call set-transient-map: Emacs 29.1. (line 693)
* compat-call setq-local: Emacs 27.1. (line 370)
* compat-call sort: Emacs 25.1. (line 190)
* compat-call string-lines: Emacs 29.1. (line 729)
* compat-call string-trim: Emacs 26.1. (line 375)
* compat-call string-trim-left: Emacs 26.1. (line 359)
* compat-call string-trim-right: Emacs 26.1. (line 367)
* compat-call string-width: Emacs 28.1. (line 388)
* compat-function: Usage. (line 51)
* compiled-function-p: Emacs 29.1. (line 214)
* count-sentences: Emacs 29.1. (line 17)
* cXXXr: Emacs 26.1. (line 66)
* cXXXXr: Emacs 26.1. (line 67)
* date-days-in-month: Emacs 27.1. (line 213)
* date-ordinal-to-time: Emacs 27.1. (line 220)
* decoded-time-day: Emacs 27.1. (line 175)
* decoded-time-dst: Emacs 27.1. (line 195)
* decoded-time-hour: Emacs 27.1. (line 170)
* decoded-time-minute: Emacs 27.1. (line 165)
* decoded-time-month: Emacs 27.1. (line 180)
* decoded-time-period: Emacs 28.1. (line 360)
* decoded-time-second: Emacs 27.1. (line 160)
* decoded-time-weekday: Emacs 27.1. (line 190)
* decoded-time-year: Emacs 27.1. (line 185)
* decoded-time-zone: Emacs 27.1. (line 200)
* define-keymap: Emacs 29.1. (line 506)
* defvar-keymap: Emacs 29.1. (line 574)
* delete-line: Emacs 29.1. (line 51)
* directory-abbrev-apply: Emacs 29.1. (line 370)
* directory-abbrev-make-regexp: Emacs 29.1. (line 367)
* directory-empty-p: Emacs 28.1. (line 243)
* directory-name-p: Emacs 25.1. (line 56)
* dlet: Emacs 28.1. (line 143)
* dolist-with-progress-reporter: Emacs 27.1. (line 119)
* ensure-list: Emacs 28.1. (line 158)
* ert-with-temp-directory: Emacs 29.1. (line 606)
* ert-with-temp-file: Emacs 29.1. (line 600)
* file-attribute-access-time: Emacs 26.1. (line 223)
* file-attribute-collect: Emacs 26.1. (line 260)
* file-attribute-device-number: Emacs 26.1. (line 255)
* file-attribute-file-identifier: Emacs 29.1. (line 327)
* file-attribute-group-id: Emacs 26.1. (line 218)
* file-attribute-inode-number: Emacs 26.1. (line 250)
* file-attribute-link-number: Emacs 26.1. (line 208)
* file-attribute-modes: Emacs 26.1. (line 245)
* file-attribute-modification-time: Emacs 26.1. (line 228)
* file-attribute-size: Emacs 26.1. (line 240)
* file-attribute-status-change-time: Emacs 26.1. (line 234)
* file-attribute-type: Emacs 26.1. (line 203)
* file-attribute-user-id: Emacs 26.1. (line 213)
* file-backup-file-names: Emacs 28.1. (line 348)
* file-has-changed-p: Emacs 29.1. (line 352)
* file-local-name: Emacs 26.1. (line 167)
* file-modes-number-to-symbolic: Emacs 28.1. (line 342)
* file-name-concat: Emacs 28.1. (line 53)
* file-name-parent-directory: Emacs 29.1. (line 343)
* file-name-quote: Emacs 26.1. (line 102)
* file-name-quoted-p: Emacs 26.1. (line 95)
* file-name-split: Emacs 29.1. (line 333)
* file-name-unquote: Emacs 26.1. (line 90)
* file-name-with-extension: Emacs 28.1. (line 225)
* file-size-human-readable-iec: Emacs 27.1. (line 251)
* fixnump: Emacs 27.1. (line 60)
* flatten-tree: Emacs 27.1. (line 132)
* format-message: Emacs 25.1. (line 44)
* format-prompt: Emacs 28.1. (line 254)
* funcall-with-delayed-message: Emacs 29.1. (line 136)
* function-alias-p: Emacs 29.1. (line 221)
* garbage-collect-maybe: Emacs 28.1. (line 68)
* gensym: Emacs 26.1. (line 70)
* get-display-property: Emacs 29.1. (line 161)
* get-scratch-buffer-create: Emacs 29.1. (line 30)
* hash-table-empty: Emacs 25.1. (line 120)
* if-let: Emacs 25.1. (line 97)
* if-let*: Emacs 26.1. (line 149)
* ignore-errors: Emacs 27.1. (line 106)
* image-property: Emacs 26.1. (line 198)
* insert-into-buffer: Emacs 28.1. (line 92)
* key-parse: Emacs 29.1. (line 407)
* key-valid-p: Emacs 29.1. (line 375)
* keymap-global-lookup: Emacs 29.1. (line 502)
* keymap-global-set: Emacs 29.1. (line 436)
* keymap-global-unset: Emacs 29.1. (line 456)
* keymap-local-lookup: Emacs 29.1. (line 498)
* keymap-local-set: Emacs 29.1. (line 446)
* keymap-local-unset: Emacs 29.1. (line 471)
* keymap-lookup: Emacs 29.1. (line 485)
* keymap-set: Emacs 29.1. (line 412)
* keymap-substitute: Emacs 29.1. (line 477)
* length<: Emacs 28.1. (line 45)
* length=: Emacs 28.1. (line 42)
* length>: Emacs 28.1. (line 50)
* list-of-strings-p: Emacs 29.1. (line 54)
* macroexp-file-name: Emacs 28.1. (line 301)
* macroexp-parse: Emacs 25.1. (line 175)
* macroexp-quote: Emacs 25.1. (line 172)
* macroexp-warn-and-return: Emacs 28.1. (line 305)
* macroexpand-1: Emacs 25.1. (line 165)
* major-mode-restore: Emacs 27.1. (line 22)
* major-mode-suspend: Emacs 27.1. (line 13)
* make-empty-file: Emacs 27.1. (line 254)
* make-lock-file-name: Emacs 28.1. (line 356)
* make-nearby-temp-file: Emacs 26.1. (line 120)
* make-separator-line: Emacs 28.1. (line 88)
* mapcan: Emacs 26.1. (line 53)
* mark-thing-at-mouse: Emacs 28.1. (line 298)
* match-buffers: Emacs 29.1. (line 280)
* minibuffer-history-value: Emacs 27.1. (line 32)
* named-let: Emacs 28.1. (line 207)
* ntake: Emacs 29.1. (line 201)
* package-get-version: Emacs 27.1. (line 205)
* plistp: Emacs 29.1. (line 57)
* pos-bol: Emacs 29.1. (line 111)
* pos-eol: Emacs 29.1. (line 115)
* process-lines-handling-status: Emacs 28.1. (line 20)
* process-lines-ignore-status: Emacs 28.1. (line 16)
* proper-list-p: Emacs 27.1. (line 76)
* provided-mode-derived-p: Emacs 27.1. (line 247)
* read-answer: Emacs 26.1. (line 17)
* read-char-from-minibuffer: Emacs 27.1. (line 44)
* read-multiple-choice: Emacs 26.1. (line 185)
* readablep: Emacs 29.1. (line 20)
* region-bounds: Emacs 25.1. (line 28)
* region-noncontiguous-p: Emacs 25.1. (line 34)
* replace-regexp-in-string: Emacs 28.1. (line 117)
* replace-string-in-region: Emacs 28.1. (line 102)
* ring-resize: Emacs 27.1. (line 28)
* save-mark-and-excursion: Emacs 25.1. (line 39)
* string-chop-newline: Emacs 28.1. (line 202)
* string-clean-whitespace: Emacs 28.1. (line 171)
* string-distance: Emacs 27.1. (line 86)
* string-equal-ignore-case: Emacs 29.1. (line 234)
* string-fill: Emacs 28.1. (line 178)
* string-glyph-split: Emacs 29.1. (line 289)
* string-greaterp: Emacs 25.1. (line 64)
* string-lines: Emacs 28.1. (line 186)
* string-pad: Emacs 28.1. (line 193)
* string-replace: Emacs 28.1. (line 77)
* string-search: Emacs 28.1. (line 34)
* string-split: Emacs 29.1. (line 240)
* subr-native-elisp-p: Emacs 28.1. (line 372)
* subr-primitive-p: Emacs 28.1. (line 365)
* substitute-quotes: Emacs 29.1. (line 26)
* take: Emacs 29.1. (line 187)
* temporary-file-directory: Emacs 26.1. (line 137)
* text-property-search-backward: Emacs 27.1. (line 332)
* text-property-search-forward: Emacs 27.1. (line 260)
* text-quoting-style: Emacs 28.1. (line 28)
* thing-at-mouse: Emacs 28.1. (line 285)
* thread-first: Emacs 25.1. (line 123)
* thread-last: Emacs 25.1. (line 144)
* time-equal-p: Emacs 27.1. (line 208)
* use-region-beginning: Emacs 29.1. (line 39)
* use-region-end: Emacs 29.1. (line 36)
* use-region-noncontiguous-p: Emacs 29.1. (line 33)
* when-let: Emacs 25.1. (line 115)
* when-let*: Emacs 26.1. (line 153)
* while-let: Emacs 29.1. (line 594)
* with-buffer-unmodified-if-unchanged: Emacs 29.1. (line 312)
* with-delayed-message: Emacs 29.1. (line 119)
* with-environment-variables: Emacs 28.1. (line 309)
* with-existing-directory: Emacs 28.1. (line 132)
* with-file-modes: Emacs 25.1. (line 71)
* with-memoization: Emacs 29.1. (line 60)
* with-minibuffer-selected-window: Emacs 27.1. (line 38)
* with-restriction: Emacs 29.1. (line 65)
* with-suppressed-warnings: Emacs 27.1. (line 65)
* with-window-non-dedicated: Emacs 28.1. (line 377)
* without-restriction: Emacs 29.1. (line 99)
* xor: Emacs 27.1. (line 142)

File: doc0jZUSv.info, Node: Variable Index, Prev: Function Index, Up: Top
Appendix B Variable Index
*************************
[index]
* Menu:
* exec-path: Emacs 27.1. (line 228)
* gensym-counter: Emacs 26.1. (line 77)
* mounted-file-systems: Emacs 26.1. (line 133)
* regexp-unmatchable: Emacs 27.1. (line 152)
* set-transient-map-timeout: Emacs 29.1. (line 719)
* text-quoting-style: Emacs 25.1. (line 13)

Tag Table:
Node: Top829
Node: Introduction2258
Node: Overview2421
Node: Usage2947
Node: Limitations7161
Node: Support11945
Node: Emacs 25.112530
Node: Emacs 26.121932
Node: Emacs 27.139184
Node: Emacs 28.159581
Node: Emacs 29.179251
Node: Development115649
Node: Function Index116669
Node: Variable Index131882

End Tag Table

Local Variables:
coding: utf-8
End:
Reference in New Issue View Git Blame Copy Permalink