This is doc0jZUSv.info, produced by makeinfo version 6.7 from compat.texi. Copyright © 2022-2023 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover Texts being “A GNU Manual,” and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled “GNU Free Documentation License.” (a) The FSF’s Back-Cover Text is: “You have the freedom to copy and modify this GNU manual.” INFO-DIR-SECTION Emacs START-INFO-DIR-ENTRY * Compat: (compat). Compatibility Library for Emacs Lisp. END-INFO-DIR-ENTRY  File: doc0jZUSv.info, Node: Top, Next: Introduction, Up: (dir) "Compat" Manual *************** This manual documents the usage of the "Compat" Emacs lisp library, the forward-compatibility library for Emacs Lisp, corresponding to version 29.1.4.1. Copyright © 2022-2023 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover Texts being “A GNU Manual,” and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled “GNU Free Documentation License.” (a) The FSF’s Back-Cover Text is: “You have the freedom to copy and modify this GNU manual.” * Menu: * Introduction:: * Support:: * Development:: * Function Index:: * Variable Index:: — The Detailed Node Listing — Introduction * Overview:: * Usage:: * Limitations:: Support * Emacs 25.1:: Compatibility support for Emacs 25.1 * Emacs 26.1:: Compatibility support for Emacs 26.1 * Emacs 27.1:: Compatibility support for Emacs 27.1 * Emacs 28.1:: Compatibility support for Emacs 28.1 * Emacs 29.1:: Compatibility support for Emacs 29.1  File: doc0jZUSv.info, Node: Introduction, Next: Support, Prev: Top, Up: Top 1 Introduction ************** * Menu: * Overview:: * Usage:: * Limitations::  File: doc0jZUSv.info, Node: Overview, Next: Usage, Up: Introduction 1.1 Overview ============ The objective of Compat is to provide "forwards compatibility" library for Emacs Lisp. By using Compat, an Elisp package does not have to make the decision to either use new and useful functionality or support old versions of Emacs. The library provides support back until Emacs 24.4. The intended audience are package developers that are interested in using newer developments, without having to break compatibility.  File: doc0jZUSv.info, Node: Usage, Next: Limitations, Prev: Overview, Up: Introduction 1.2 Usage ========= The intended use-case for this library is for package developers to add as a dependency in the header: ;; Package-Requires: ((emacs "24.4") (compat "29.1.4.1")) There is no need to depend on ‘emacs’ 24.4 specifically. One can choose to any newer version, if features not provided by Compat necessitate it, for example bug fixes or UI improvements. In any file where compatibility forms are used, a (require 'compat) should be added early on. In packages which are part of Emacs itself and which want to take advantage of Compat, the ‘noerror’ flag should be specified: ‘(require 'compat nil 'noerror)’. In the future a minimal version of Compat may be added to the Emacs core, such that the ‘noerror’ flag will not be necessary anymore. This will load all necessary Compat definitions. Compat also loads the ‘seq’ library which is preloaded by default on Emacs 29. Note that if Compat is installed on a recent version of Emacs, all of the definitions are disabled at compile time, such that no negative performance impact is incurred. Note that Compat provides replacement functions with extended functionality for functions that are already defined (‘sort’, ‘assoc’, ...). These functions may have changed their calling convention (additional optional arguments) or may have changed their behavior. These functions must be looked up explicitly with ‘compat-function’ or called explicitly with ‘compat-call’. We call them “Extended Definitions”. In contrast, newly “Added Definitions” can be called as usual. (compat-call assoc key alist testfn) ;; Call extended `assoc' (mapcan fun seq) ;; Call newly added `mapcan' -- Macro: compat-call fun &rest args This macro calls the compatibility function FUN with ARGS. Many functions provided by Compat can be called directly without this macro. However in the case where Compat provides an alternative version of an existing function, the function call has to go through ‘compat-call’. This happens for example when the calling convention of a function has changed. -- Macro: compat-function fun This macro returns the compatibility function symbol for FUN. See ‘compat-call’ for a more convenient macro to directly call compatibility functions. If Compat is used in core packages, where Compat must be required currently with the ‘noerror’ flag, the macros ‘compat-call’ and ‘compat-function’ ar not available. In the future the macros could be added to subr. Alternatively a minimal version of compat.el could be added to the core. For now it is necessary to replicate the definition of the macros within core packages. For example the package ERC defines its own macro ‘erc-compat-call’, which replicates the Compat definition precisely. This design has been chosen since Compat does not advise or override existing functions. Generally Compat is written in defensive style which is supposed to reduce potential breakage, and to increase the chances of staying binary compatible across releases. The extensive test coverage ensures that we can maintain high quality, which is crucial for Compat which is not restricted to a namespace like usual libraries. If you intend to use a compatibility function in your code it is recommended that you take a look at the test suite ‘compat-tests.el’. There you can see the supported calling conventions, which are guaranteed to work on the supported Emacs versions. We ensure this using continuous integration. All functions provided by Compat are covered by the test suite. There is a link to the corresponding test on the first line of each definition. You may want to subscribe to the compat-announce (https://lists.sr.ht/~pkal/compat-announce) mailing list to be notified when new versions are released or relevant changes are made. We also provide a development mailing list (https://lists.sr.ht/~pkal/compat-devel) (~pkal/compat-devel@lists.sr.ht <~pkal/compat-devel@lists.sr.ht>).  File: doc0jZUSv.info, Node: Limitations, Prev: Usage, Up: Introduction 1.3 Limitations =============== The Compat library has a number of limitations. Complete backwards compatibility cannot be provided due to the scope of Compat and for technical reasons. The scope is intentionally restricted in order to limit the size of Compat and to ensure that the library stays maintainable. Emacs version 24.4 is chosen as the oldest version supported by Compat, since Elisp has seen significant changes at that version. On the library level, subr-x was introduced in 24.4. Most popular Emacs packages already require 24.4 or even newer versions of Emacs. Supporting for more historical Emacs versions would complicate maintainance significantly while only few packages and users would benefit. Below we list a number of reasons why certain functionality cannot be provided. Note that in some special cases exceptions can be made and functions can still be added to Compat even if they satisfy the criteria from the list. In case you miss functionality which you think should belong here, a *note report: Development. would be much appreciated. • The additional functionality is a command or a user-facing minor or major mode. Compat is limited to functionality on the “library level”. Generally functions provided by Compat are non-interactive, such that the user interface (M-x) is unaffected by the presence of Compat. • The function is not useful for package authors or not intended to be used by packages, but is only useful on the configuration level. The macro ‘setopt’ is such an example. • Private (double dashed) functions are not ported back. If Compat includes some private functions, they are meant purely for internal usage. • The added or extended function belongs to the “application level” and not the “library level”. Features which are not preloaded often belong to the “application level”. Application examples are programming modes or modes like Dired, IRC and Gnus. If these modes are extended with new functions, these are not ported back. • An existing function or macro was extended by some new functionality. To support these cases, the function or macro would have to be advised. Since this is invasive and adds significant overhead, even when the new feature is not used, Compat does not use advices. As a compromise, compatibility functions and macros with a changed calling convention or behavior can be accessed via the ‘compat-function’ and ‘compat-call’ macros. In this manual we call such definitions “Extended Definitions”. An example is the function ‘plist-get’. Note that extended functions are subject to closer scrutiny, since their usage via ‘compat-call’ is not completely painless. If a particular extended function does not see much usage or the extension yields only marginal benefits, we may not provide it as part of Compat. • Bug fixes are usually not ported back as part of Compat. Sometimes library functions show wrong behavior for edge cases. In those cases Compat could in principle provide a compatibility function which is invoked via ‘compat-call’. Such extended definitions would increase the maintainance burden of Compat. At the same time the benefits would be small given that Compat does not override existing definitions. • The definition belongs to an Emacs core package, which is also distributed via ELPA. Compat does not have to provide backward compatibility for core packages since the updated package can be installed directly from ELPA. Examples include the libraries xref, project, seq, map and transient. • New functionality depends on an entire new, non-trivial core library, which is infeasible to duplicate within Compat. If a backport of such a library is required, the preferred approach is to either release the library separately on GNU ELPA as a core package or as a separately maintained GNU ELPA package. An example is the iso8601 library. • New functionality was implemented in the C core, or depends on external libraries that cannot be reasonably duplicated in the scope of a compatibility library. Sometimes new functions on the C level rely on internal data structures, which we cannot access, rendering a backport impossible. For example a missing libxml cannot be emulated. • The semantics of Elisp changed on a deep level. For example the addition of Bigint support in Emacs 27.1 cannot be replicated on the level of Compat.  File: doc0jZUSv.info, Node: Support, Next: Development, Prev: Introduction, Up: Top 2 Support ********* This section goes into the features that Compat manages and doesn’t manage to provide for each Emacs version. * Menu: * Emacs 25.1:: Compatibility support for Emacs 25.1 * Emacs 26.1:: Compatibility support for Emacs 26.1 * Emacs 27.1:: Compatibility support for Emacs 27.1 * Emacs 28.1:: Compatibility support for Emacs 28.1 * Emacs 29.1:: Compatibility support for Emacs 29.1  File: doc0jZUSv.info, Node: Emacs 25.1, Next: Emacs 26.1, Up: Support 2.1 Emacs 25.1 ============== 2.1.1 Added Definitions ----------------------- The following functions and macros are implemented in Emacs 25.1. These functions are made available by Compat on Emacs versions older than 25.1. -- User Option: text-quoting-style The value of this user option is a symbol that specifies the style Emacs should use for single quotes in the wording of help and messages. If the option’s value is ‘curve’, the style is ‘like this’ with curved single quotes. If the value is ‘straight’, the style is 'like this' with straight apostrophes. If the value is ‘grave’, quotes are not translated and the style is `like this' with grave accent and apostrophe, the standard style before Emacs version 25. The default value ‘nil’ acts like ‘curve’ if curved single quotes seem to be displayable, and like ‘grave’ otherwise. This option is useful on platforms that have problems with curved quotes. You can customize it freely according to your personal preference. -- Function: region-bounds Return the boundaries of the region. Value is a list of one or more cons cells of the form ‘(start . end)’. It will have more than one cons cell when the region is non-contiguous, see ‘region-noncontiguous-p’ and ‘extract-rectangle-bounds’. -- Function: region-noncontiguous-p Return non-nil if the region contains several pieces. An example is a rectangular region handled as a list of separate contiguous regions for each line. -- Macro: save-mark-and-excursion body... This macro is like ‘save-excursion’, but also saves and restores the mark location and ‘mark-active’. This macro does what ‘save-excursion’ did before Emacs 25.1. -- Function: format-message string &rest objects This function acts like ‘format’, except it also converts any grave accents (`) and apostrophes (') in STRING as per the value of ‘text-quoting-style’. Typically grave accent and apostrophe in the format translate to matching curved quotes, e.g., "Missing `%s'" might result in "Missing ‘foo’". *Note (elisp)Text Quoting Style::, for how to influence or inhibit this translation. *note (elisp)Formatting Strings::. -- Function: directory-name-p filename This function returns non-‘nil’ if FILENAME ends with a directory separator character. This is the forward slash ‘/’ on GNU and other POSIX-like systems; MS-Windows and MS-DOS recognize both the forward slash and the backslash ‘\’ as directory separators. *Note (elisp)Directory Names::. -- Function: string-greaterp string1 string2 This function returns the result of comparing STRING1 and STRING2 in the opposite order, i.e., it is equivalent to calling ‘(string-lessp STRING2 STRING1)’. *Note (elisp)Text Comparison::. -- Macro: with-file-modes mode body... This macro evaluates the BODY forms with the default permissions for new files temporarily set to MODES (whose value is as for ‘set-file-modes’ above). When finished, it restores the original default file permissions, and returns the value of the last form in BODY. This is useful for creating private files, for example. *Note (elisp)Changing Files::. -- Function: alist-get key alist &optional default remove This function is similar to ‘assq’. It finds the first association ‘(KEY . VALUE)’ by comparing KEY with ALIST elements, and, if found, returns the VALUE of that association. If no association is found, the function returns DEFAULT. This is a generalized variable (*note (elisp)Generalized Variables::) that can be used to change a value with ‘setf’. When using it to set a value, optional argument REMOVE non-‘nil’ means to remove KEY’s association from ALIST if the new value is ‘eql’ to DEFAULT. *note (elisp)Association Lists::. -- Macro: if-let (bindings...) then &rest else... As with ‘let*’, BINDINGS will consist of ‘(SYMBOL VALUE-FORM)’ entries that are evaluated and bound sequentially. If all VALUE-FORM evaluate to non-‘nil’ values, then THEN is evaluated as were the case with a regular ‘let*’ expression, with all the variables bound. If any VALUE-FORM evaluates to ‘nil’, ELSE is evaluated, without any bound variables. A binding may also optionally drop the SYMBOL, and simplify to ‘(VALUE-FORM)’ if only the test is of interest. For the sake of backwards compatibility, it is possible to write a single binding without a binding list: (if-let* (SYMBOL (test)) foo bar) ≡ (if-let* ((SYMBOL (test))) foo bar) -- Macro: when-let (bindings...) &rest body As with ‘when’, if one is only interested in the case where all BINDINGS are non-nil. Otherwise BINDINGS are interpreted just as they are by ‘if-let*’. -- Function: hash-table-empty hash-table Check whether HASH-TABLE is empty (has 0 elements). -- Macro: thread-first &rest forms Combine FORMS into a single expression by “threading” each element as the _first_ argument of their successor. Elements of FORMS can either be an list of an atom. For example, consider the threading expression and it’s equivalent macro expansion: (thread-first 5 (+ 20) (/ 25) - (+ 40)) ≡ (+ (- (/ (+ 5 20) 25)) 40) Note how the single ‘-’ got converted into a list before threading. This example uses arithmetic functions, but ‘thread-first’ is not restricted to arithmetic or side-effect free code. -- Macro: thread-last &rest forms Combine FORMS into a single expression by “threading” each element as the _last_ argument of their successor. Elements of FORMS can either be an list of an atom. For example, consider the threading expression and it’s equivalent macro expansion: (thread-first 5 (+ 20) (/ 25) - (+ 40)) ≡ (+ 40 (- (/ 25 (+ 20 5)))) Note how the single ‘-’ got converted into a list before threading. This example uses arithmetic functions, but ‘thread-last’ is not restricted to arithmetic or side-effect free code. -- Function: macroexpand-1 form &optional environment This function expands macros like ‘macroexpand’, but it only performs one step of the expansion: if the result is another macro call, ‘macroexpand-1’ will not expand it. *Note Expansion: (elisp)Expansion. -- Function: macroexp-quote e Return an expression E such that ‘(eval e)’ is V. -- Function: macroexp-parse body Parse a function BODY into ‘(declarations . exps)’. -- Function: bool-vector &rest objects This function creates and returns a bool-vector whose elements are the arguments, OBJECTS. *Note (elisp)Bool-Vectors::. 2.1.2 Extended Definitions -------------------------- These functions must be called explicitly via ‘compat-call’, since their calling convention or behavior was extended in Emacs 25.1: -- Function: compat-call sort sequence predicate This function sorts SEQUENCE stably. Note that this function doesn’t work for all sequences; it may be used only for lists and vectors. If SEQUENCE is a list, it is modified destructively. This functions returns the sorted SEQUENCE and compares elements using PREDICATE. A stable sort is one in which elements with equal sort keys maintain their relative order before and after the sort. Stability is important when successive sorts are used to order elements according to different criteria. *Note (elisp)Sequence Functions::. The compatibility version adds support for vectors to be sorted, not just lists. 2.1.3 Missing Definitions ------------------------- Compat does not provide support for the following Lisp features implemented in 25.1: • The function ‘macroexp-macroexpand’. • The macro ‘macroexp-let2*’. • The function ‘directory-files-recursively’. • New ‘pcase’ patterns. • The hook ‘prefix-command-echo-keystrokes-functions’ and ‘prefix-command-preserve-state-hook’. • The hook ‘pre-redisplay-functions’. • The function ‘make-process’. • Support for the variable ‘inhibit-message’. • The ‘define-inline’ functionality. • The functions ‘string-collate-lessp’ and ‘string-collate-equalp’. • The function ‘funcall-interactively’. • The function ‘buffer-substring-with-bidi-context’. • The function ‘font-info’. • The function ‘default-font-width’. • The function ‘window-font-height’ and ‘window-font-width’. • The function ‘window-max-chars-per-line’. • The function ‘set-binary-mode’. • The functions ‘bufferpos-to-filepos’ and ‘filepos-to-bufferpos’. • The ‘thunk’ library.  File: doc0jZUSv.info, Node: Emacs 26.1, Next: Emacs 27.1, Prev: Emacs 25.1, Up: Support 2.2 Emacs 26.1 ============== 2.2.1 Added Definitions ----------------------- The following functions and macros are implemented in Emacs 26.1. These functions are made available by Compat on Emacs versions older than 26.1. -- Function: assoc-delete-all key alist This function is like ‘assq-delete-all’ except that it uses ‘equal’ to compare elements. -- Function: read-answer question answers This function prompts the user with text in QUESTION, which should end in the ‘SPC’ character. The function includes in the prompt the possible responses in ANSWERS by appending them to the end of QUESTION. The possible responses are provided in ANSWERS as an alist whose elements are of the following form: (LONG-ANSWER SHORT-ANSWER HELP-MESSAGE) where LONG-ANSWER is the complete text of the user response, a string; SHORT-ANSWER is a short form of the same response, a single character or a function key; and HELP-MESSAGE is the text that describes the meaning of the answer. If the variable ‘read-answer-short’ is non-‘nil’, the prompt will show the short variants of the possible answers and the user is expected to type the single characters/keys shown in the prompt; otherwise the prompt will show the long variants of the answers, and the user is expected to type the full text of one of the answers and end by pressing . If ‘use-dialog-box’ is non-‘nil’, and this function was invoked by mouse events, the question and the answers will be displayed in a GUI dialog box. The function returns the text of the LONG-ANSWER selected by the user, regardless of whether long or short answers were shown in the prompt and typed by the user. Here is an example of using this function: (let ((read-answer-short t)) (read-answer "Foo " '(("yes" ?y "perform the action") ("no" ?n "skip to the next") ("all" ?! "perform for the rest without more questions") ("help" ?h "show help") ("quit" ?q "exit")))) -- Function: mapcan function sequence This function applies FUNCTION to each element of SEQUENCE, like ‘mapcar’, but instead of collecting the results into a list, it returns a single list with all the elements of the results (which must be lists), by altering the results (using ‘nconc’; *note (elisp)Rearrangement::). Like with ‘mapcar’, SEQUENCE can be of any type except a char-table. ;; Contrast this: (mapcar #'list '(a b c d)) ⇒ ((a) (b) (c) (d)) ;; with this: (mapcan #'list '(a b c d)) ⇒ (a b c d) *Note (elisp)Mapping Functions::. -- Function: cXXXr -- Function: cXXXXr *Note (elisp)List Elements::. -- Function: gensym &optional prefix This function returns a symbol using ‘make-symbol’, whose name is made by appending ‘gensym-counter’ to PREFIX and incrementing that counter, guaranteeing that no two calls to this function will generate a symbol with the same name. The prefix defaults to ‘"g"’. -- Variable: gensym-counter See ‘gensym’. -- Function: buffer-hash &optional buffer-or-name Return a hash of BUFFER-OR-NAME. If ‘nil’, this defaults to the current buffer. As opposed to ‘secure-hash’, this function computes the hash based on the internal representation of the buffer, disregarding any coding systems. It’s therefore only useful when comparing two buffers running in the same Emacs, and is not guaranteed to return the same hash between different Emacs versions. It should be somewhat more efficient on larger buffers than ‘secure-hash’ is, and should not allocate more memory. -- Macro: file-name-unquote name This macro removes the quotation prefix ‘/:’ from the file NAME, if any. If NAME is a remote file name, the local part of NAME is unquoted. -- Function: file-name-quoted-p name This macro returns non-‘nil’, when NAME is quoted with the prefix ‘/:’. If NAME is a remote file name, the local part of NAME is checked. *Note (elisp)File Name Expansion::. -- Function: file-name-quote name This macro adds the quotation prefix ‘/:’ to the file NAME. For a local file NAME, it prefixes NAME with ‘/:’. If NAME is a remote file name, the local part of NAME (*note (elisp)Magic File Names::) is quoted. If NAME is already a quoted file name, NAME is returned unchanged. (substitute-in-file-name (compat-call file-name-quote "bar/~/foo")) ⇒ "/:bar/~/foo" (substitute-in-file-name (compat-call file-name-quote "/ssh:host:bar/~/foo")) ⇒ "/ssh:host:/:bar/~/foo" The macro cannot be used to suppress file name handlers from magic file names (*note (elisp)Magic File Names::). *Note (elisp)File Name Expansion::. -- Function: make-nearby-temp-file prefix &optional dir-flag suffix This function is similar to ‘make-temp-file’, but it creates a temporary file as close as possible to ‘default-directory’. If PREFIX is a relative file name, and ‘default-directory’ is a remote file name or located on a mounted file systems, the temporary file is created in the directory returned by the function ‘temporary-file-directory’. Otherwise, the function ‘make-temp-file’ is used. PREFIX, DIR-FLAG and SUFFIX have the same meaning as in ‘make-temp-file’. (let ((default-directory "/ssh:remotehost:")) (make-nearby-temp-file "foo")) ⇒ "/ssh:remotehost:/tmp/foo232J6v" -- Variable: mounted-file-systems A regular expression matching files names that are probably on a mounted file system. -- Function: temporary-file-directory The directory for writing temporary files via ‘make-nearby-temp-file’. In case of a remote ‘default-directory’, this is a directory for temporary files on that remote host. If such a directory does not exist, or ‘default-directory’ ought to be located on a mounted file system (see ‘mounted-file-systems’), the function returns ‘default-directory’. For a non-remote and non-mounted ‘default-directory’, the value of the variable ‘temporary-file-directory’ is returned. *Note (elisp)Unique File Names::. -- Macro: if-let* (bindings...) then &rest else ‘if-let*’ is mostly equivalent to ‘if-let’, with the exception that the legacy ‘(if (VAR (test)) foo bar)’ syntax is not permitted. -- Macro: when-let* (bindings...) then &rest else ‘when-let*’ is mostly equivalent to ‘when-let’, with the exception that the legacy ‘(when-let (VAR (test)) foo bar)’ syntax is not permitted. -- Macro: and-let* (bindings...) &rest body A combination of LET* and AND, analogous to ‘when-let*’. If all BINDINGS are non-‘nil’ and BODY is ‘nil’, then the result of the ‘and-let*’ form will be the last value bound in BINDINGS. **Please Note:** The implementation provided by Compat does not include a bug that was observed with Emacs 26 (see ). -- Function: file-local-name filename This function returns the _local part_ of FILENAME. This is the part of the file’s name that identifies it on the remote host, and is typically obtained by removing from the remote file name the parts that specify the remote host and the method of accessing it. For example: (file-local-name "/ssh:USER@HOST:/foo/bar") ⇒ "/foo/bar" For a remote FILENAME, this function returns a file name which could be used directly as an argument of a remote process (*note (elisp)Asynchronous Processes::, and *note (elisp)Synchronous Processes::), and as the program to run on the remote host. If FILENAME is local, this function returns it unchanged. *Note (elisp)Magic File Names::. -- Function: read-multiple-choice prompt choices Ask user a multiple choice question. PROMPT should be a string that will be displayed as the prompt. CHOICES is an alist where the first element in each entry is a character to be entered, the second element is a short name for the entry to be displayed while prompting (if there’s room, it might be shortened), and the third, optional entry is a longer explanation that will be displayed in a help buffer if the user requests more help. See *note Reading One Event: (elisp)Reading One Event. -- Function: image-property Defined in ‘image.el’. This function can also be used as a generalised variable. -- Function: file-attribute-type Return the field _type_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-link-number Return the field _link-number_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-user-id Return the field _user-id_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-group-id Return the field _group-id_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-access-time Return the field _access-time_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-modification-time Return the field _modification-time_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-status-change-time Return the field _modification-time_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-size Return the field _size_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-modes Return the field _modes_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-inode-number Return the field _inode-number_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-device-number Return the field _device-number_ as generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-attribute-collect attributes &rest attr-names Filter the file attributes ATTRIBUTES, as generated by ‘file-attributes’, according to ATTR-NAMES. Valid attribute names for ATTR-NAMES are: type, link-number, user-id, group-id, access-time, modification-time, status-change-time, size, modes, inode-number and device-number. (file-attributes ".") ⇒ (t 1 1000 1000 (25329 18215 325481 96000) (25325 15364 530263 840000) (25325 15364 530263 840000) 788 "drwxr-xr-x" t 137819 40) (file-attribute-collect (file-attributes ".") 'type 'modes 'inode-number) ⇒ (t "drwxr-xr-x" 137819) 2.2.2 Extended Definitions -------------------------- These functions must be called explicitly via ‘compat-call’, since their calling convention or behavior was extended in Emacs 26.1: -- Function: compat-call make-temp-file prefix &optional dir-flag suffix text This function creates a temporary file and returns its name. Emacs creates the temporary file’s name by adding to PREFIX some random characters that are different in each Emacs job. The result is guaranteed to be a newly created file, containing TEXT if that’s given as a string and empty otherwise. On MS-DOS, this function can truncate PREFIX to fit into the 8+3 file-name limits. If PREFIX is a relative file name, it is expanded against ‘temporary-file-directory’. The compatibility version adds support for handling the optional argument TEXT. (make-temp-file "foo") ⇒ "/tmp/foo232J6v" When ‘make-temp-file’ returns, the file has been created and is empty. At that point, you should write the intended contents into the file. If DIR-FLAG is non-‘nil’, ‘make-temp-file’ creates an empty directory instead of an empty file. It returns the file name, not the directory name, of that directory. *Note (elisp)Directory Names::. If SUFFIX is non-‘nil’, ‘make-temp-file’ adds it at the end of the file name. If TEXT is a string, ‘make-temp-file’ inserts it in the file. To prevent conflicts among different libraries running in the same Emacs, each Lisp program that uses ‘make-temp-file’ should have its own PREFIX. The number added to the end of PREFIX distinguishes between the same application running in different Emacs jobs. Additional added characters permit a large number of distinct names even in one Emacs job. -- Function: compat-call assoc key alist &optional testfn This function returns the first association for KEY in ALIST, comparing KEY against the alist elements using TESTFN if it is a function, and ‘equal’ otherwise (*note (elisp)Equality Predicates::). If TESTFN is a function, it is called with two arguments: the CAR of an element from ALIST and KEY. The function returns ‘nil’ if no association in ALIST has a CAR equal to KEY, as tested by TESTFN. *Note (elisp)Association Lists::. The compatibility version adds support for handling the optional argument TESTFN. -- Function: compat-call line-number-at-pos &optional pos absolute This function returns the line number in the current buffer corresponding to the buffer position POS. If POS is ‘nil’ or omitted, the current buffer position is used. If ABSOLUTE is ‘nil’, the default, counting starts at ‘(point-min)’, so the value refers to the contents of the accessible portion of the (potentially narrowed) buffer. If ABSOLUTE is non-‘nil’, ignore any narrowing and return *Note (elisp)Text Lines::. The compatibility version adds support for handling the optional argument ABSOLUTE. -- Function: compat-call alist-get key alist &optional default remove testfn *Note (elisp)Association Lists::. This function is similar to ‘assq’. It finds the first association ‘(KEY . VALUE)’ by comparing KEY with ALIST elements, and, if found, returns the VALUE of that association. If no association is found, the function returns DEFAULT. Comparison of KEY against ALIST elements uses the function specified by TESTFN, defaulting to ‘eq’. *Note (elisp)Association Lists::. The compatibility version handles the optional argument TESTFN. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: compat-call string-trim-left string &optional regexp Remove the leading text that matches REGEXP from STRING. REGEXP defaults to ‘[ \t\n\r]+’. *Note (elisp)Creating Strings::. The compatibility version handles the optional argument REGEXP. -- Function: compat-call string-trim-right string &optional regexp Remove the trailing text that matches REGEXP from STRING. REGEXP defaults to ‘[ \t\n\r]+’. *Note (elisp)Creating Strings::. The compatibility version handles the optional argument REGEXP. -- Function: compat-call string-trim string &optional trim-left trim-right Remove the leading text that matches TRIM-LEFT and trailing text that matches TRIM-RIGHT from STRING. Both regexps default to ‘[ \t\n\r]+’. *Note (elisp)Creating Strings::. The compatibility version handles the optional arguments TRIM-LEFT and TRIM-RIGHT. 2.2.3 Missing Definitions ------------------------- Compat does not provide support for the following Lisp features implemented in 26.1: • The function ‘func-arity’. • The function ‘secure-hash-algorithms’. • The function ‘gnutls-available-p’. • Support for records and record functions. • The function ‘mapbacktrace’. • The function ‘file-name-case-insensitive-p’. • The additional elements of ‘parse-partial-sexp’. • The function ‘add-variable-watcher’. • The function ‘undo-amalgamate-change-group’. • The function ‘char-from-name’ • Signalling errors when ‘length’ or ‘member’ deal with list cycles. • The function ‘frame-list-z-order’. • The function ‘frame-restack’. • All changes related to ‘display-buffer’. • The function ‘window-swap-states’. • The function ‘string-version-lessp’. • The ‘svg’ library. • The ‘xdg’ library.  File: doc0jZUSv.info, Node: Emacs 27.1, Next: Emacs 28.1, Prev: Emacs 26.1, Up: Support 2.3 Emacs 27.1 ============== 2.3.1 Added Definitions ----------------------- The following functions and macros are implemented in Emacs 27.1. These functions are made available by Compat on Emacs versions older than 27.1. -- Function: major-mode-suspend This function works like ‘fundamental-mode’, in that it kills all buffer-local variables, but it also records the major mode in effect, so that it could subsequently be restored. This function and ‘major-mode-restore’ (described next) are useful when you need to put a buffer under some specialized mode other than the one Emacs chooses for it automatically, but would also like to be able to switch back to the original mode later. -- Function: major-mode-restore &optional avoided-modes This function restores the major mode recorded by ‘major-mode-suspend’. If no major mode was recorded, this function calls ‘normal-mode’, but tries to force it not to choose any modes in AVOIDED-MODES, if that argument is non-‘nil’. -- Function: ring-resize ring size Set the size of RING to SIZE. If the new size is smaller, then the oldest items in the ring are discarded. -- Function: minibuffer-history-value Return the value of the minibuffer input history list. If MINIBUFFER-HISTORY-VARIABLE points to a buffer-local variable and the minibuffer is active, return the buffer-local value for the buffer that was current when the minibuffer was activated." -- Macro: with-minibuffer-selected-window &rest body Execute the forms in BODY from the minibuffer in its original window. When used in a minibuffer window, select the window selected just before the minibuffer was activated, and execute the forms. -- Function: read-char-from-minibuffer prompt &optional chars history This function uses the minibuffer to read and return a single character. Optionally, it ignores any input that is not a member of CHARS, a list of accepted characters. The HISTORY argument specifies the history list symbol to use; if it is omitted or ‘nil’, this function doesn’t use the history. If you bind ‘help-form’ to a non-‘nil’ value while calling ‘read-char-from-minibuffer’, then pressing ‘help-char’ causes it to evaluate ‘help-form’ and display the result. -- Function: bignump object This predicate tests whether its argument is a large integer, and returns ‘t’ if so, ‘nil’ otherwise. Unlike small integers, large integers can be ‘=’ or ‘eql’ even if they are not ‘eq’. -- Function: fixnump object This predicate tests whether its argument is a small integer, and returns ‘t’ if so, ‘nil’ otherwise. Small integers can be compared with ‘eq’. -- Special Form: with-suppressed-warnings warnings body... In execution, this is equivalent to ‘(progn BODY...)’, but the compiler does not issue warnings for the specified conditions in BODY. WARNINGS is an association list of warning symbols and function/variable symbols they apply to. For instance, if you wish to call an obsolete function called ‘foo’, but want to suppress the compilation warning, say: (with-suppressed-warnings ((obsolete foo)) (foo ...)) -- Function: proper-list-p object This function returns the length of OBJECT if it is a proper list, ‘nil’ otherwise (*note (elisp)Cons Cells::). In addition to satisfying ‘listp’, a proper list is neither circular nor dotted. (proper-list-p '(a b c)) ⇒ 3 (proper-list-p '(a b . c)) ⇒ nil *Note (elisp)List-related Predicates::. -- Function: string-distance string1 string2 &optional bytecompare This function returns the _Levenshtein distance_ between the source string STRING1 and the target string STRING2. The Levenshtein distance is the number of single-character changes—deletions, insertions, or replacements—required to transform the source string into the target string; it is one possible definition of the _edit distance_ between strings. Letter-case of the strings is significant for the computed distance, but their text properties are ignored. If the optional argument BYTECOMPARE is non-‘nil’, the function calculates the distance in terms of bytes instead of characters. The byte-wise comparison uses the internal Emacs representation of characters, so it will produce inaccurate results for multibyte strings that include raw bytes (*note (elisp)Text Representations::); make the strings unibyte by encoding them (*note (elisp)Explicit Encoding::) if you need accurate results with raw bytes. *Note (elisp)Text Comparison::. -- Macro: ignore-errors body... This construct executes BODY, ignoring any errors that occur during its execution. If the execution is without error, ‘ignore-errors’ returns the value of the last form in BODY; otherwise, it returns ‘nil’. Here’s the example at the beginning of this subsection rewritten using ‘ignore-errors’: (ignore-errors (delete-file filename)) *Note (elisp)Handling Errors::. -- Macro: dolist-with-progress-reporter (var count [result]) reporter-or-message body... This is another convenience macro that works the same way as ‘dolist’ does, but also reports loop progress using the functions described above. As in ‘dotimes-with-progress-reporter’, ‘reporter-or-message’ can be a progress reporter or a string. You can rewrite the previous example with this macro as follows: (dolist-with-progress-reporter (k (number-sequence 0 500)) "Collecting some mana for Emacs..." (sit-for 0.01)) *Note (elisp)Progress::. -- Function: flatten-tree tree This function returns a “flattened” copy of TREE, that is, a list containing all the non-‘nil’ terminal nodes, or leaves, of the tree of cons cells rooted at TREE. Leaves in the returned list are in the same order as in TREE. (flatten-tree '(1 (2 . 3) nil (4 5 (6)) 7)) ⇒(1 2 3 4 5 6 7) *Note (elisp)Building Lists::. -- Function: xor condition1 condition2 This function returns the boolean exclusive-or of CONDITION1 and CONDITION2. That is, ‘xor’ returns ‘nil’ if either both arguments are ‘nil’, or both are non-‘nil’. Otherwise, it returns the value of that argument which is non-‘nil’. Note that in contrast to ‘or’, both arguments are always evaluated. *Note (elisp)Combining Conditions::. -- Variable: regexp-unmatchable This variable contains a regexp that is guaranteed not to match any string at all. It is particularly useful as default value for variables that may be set to a pattern that actually matches something. *Note (elisp)Regexp Functions:: -- Function: decoded-time-second time Return the SECONDS field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-minute time Return the MINUTE field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-hour time Return the HOUR field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-day time Return the DAY field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-month time Return the MONTH field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-year time Return the YEAR field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-weekday time Return the WEEKDAY field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-dst time Return the DST (daylight saving time indicator) field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: decoded-time-zone time Return the ZONE field of a ‘decoded-time’ record TIME. It can also be used as a *note Generalized Variables: (elisp)generalised variable. -- Function: package-get-version Return the version number of the package in which this is used. -- Function: time-equal-p t1 t2 This returns ‘t’ if the two time values T1 and T2 are equal. *Note (elisp)Time Calculations::. -- Function: date-days-in-month year month Return the number of days in MONTH in YEAR. For instance, February 2020 has 29 days. *Note (elisp)Time Calculations::. This function requires the ‘time-date’ feature to be loaded. -- Function: date-ordinal-to-time year ordinal Convert a YEAR/ORDINAL to the equivalent decoded-time structure. ORDINAL is the number of days since the start of the year, with January 1st being 1. *Note (elisp)Time Calculations::. This function requires the ‘time-date’ feature to be loaded. -- User Option: exec-path The value of this variable is a list of directories to search for programs to run in subprocesses. Each element is either the name of a directory (i.e., a string), or ‘nil’, which stands for the default directory (which is the value of ‘default-directory’). *Note executable-find: (elisp)Locating Files, for the details of this search. The value of ‘exec-path’ is used by ‘call-process’ and ‘start-process’ when the PROGRAM argument is not an absolute file name. Generally, you should not modify ‘exec-path’ directly. Instead, ensure that your ‘PATH’ environment variable is set appropriately before starting Emacs. Trying to modify ‘exec-path’ independently of ‘PATH’ can lead to confusing results. *Note (elisp)Subprocess Creation::. -- Function: provided-mode-derived-p mode &rest modes This function returns non-‘nil’ if MODE is derived from any of the major modes given by the symbols MODES. -- Function: file-size-human-readable-iec size Human-readable string for SIZE bytes, using IEC prefixes. -- Function: make-empty-file filename &optional parents This function creates an empty file named FILENAME. As ‘make-directory’, this function creates parent directories if PARENTS is non-‘nil’. If FILENAME already exists, this function signals an error. -- Function: text-property-search-forward prop &optional value predicate not-current Search for the next region that has text property PROP set to VALUE according to PREDICATE. This function is modeled after ‘search-forward’ and friends in that it moves point, but it returns a structure that describes the match instead of returning it in ‘match-beginning’ and friends. If the text property can’t be found, the function returns ‘nil’. If it’s found, point is placed at the end of the region that has this text property match, and a ‘prop-match’ structure is returned. PREDICATE can either be ‘t’ (which is a synonym for ‘equal’), ‘nil’ (which means “not equal”), or a predicate that will be called with two parameters: The first is VALUE, and the second is the value of the text property we’re inspecting. If NOT-CURRENT, if point is in a region where we have a match, then skip past that and find the next instance instead. The ‘prop-match’ structure has the following accessors: ‘prop-match-beginning’ (the start of the match), ‘prop-match-end’ (the end of the match), and ‘prop-match-value’ (the value of PROPERTY at the start of the match). In the examples below, imagine that you’re in a buffer that looks like this: This is a bold and here's bolditalic and this is the end. That is, the “bold” words are the ‘bold’ face, and the “italic” word is in the ‘italic’ face. With point at the start: (while (setq match (text-property-search-forward 'face 'bold t)) (push (buffer-substring (prop-match-beginning match) (prop-match-end match)) words)) This will pick out all the words that use the ‘bold’ face. (while (setq match (text-property-search-forward 'face nil t)) (push (buffer-substring (prop-match-beginning match) (prop-match-end match)) words)) This will pick out all the bits that have no face properties, which will result in the list ‘("This is a " "and here's " "and this is the end")’ (only reversed, since we used ‘push’). (while (setq match (text-property-search-forward 'face nil nil)) (push (buffer-substring (prop-match-beginning match) (prop-match-end match)) words)) This will pick out all the regions where ‘face’ is set to something, but this is split up into where the properties change, so the result here will be ‘("bold" "bold" "italic")’. For a more realistic example where you might use this, consider that you have a buffer where certain sections represent URLs, and these are tagged with ‘shr-url’. (while (setq match (text-property-search-forward 'shr-url nil nil)) (push (prop-match-value match) urls)) This will give you a list of all those URLs. *Note (Property Search)elisp::. -- Function: text-property-search-backward prop &optional value predicate not-current This is just like ‘text-property-search-forward’, but searches backward instead. Point is placed at the beginning of the matched region instead of the end, though. *Note (Property Search)elisp::. 2.3.2 Extended Definitions -------------------------- These functions must be called explicitly via ‘compat-call’, since their calling convention or behavior was extended in Emacs 27.1: -- Function: compat-call recenter &optional count redisplay This function scrolls the text in the selected window so that point is displayed at a specified vertical position within the window. It does not move point with respect to the text. *Note (elisp)Textual Scrolling::. This compatibility version adds support for the optional argument REDISPLAY. -- Function: compat-call lookup-key keymap key &optional accept-defaults This function returns the definition of KEY in KEYMAP. If the string or vector KEY is not a valid key sequence according to the prefix keys specified in KEYMAP, it must be too long and have extra events at the end that do not fit into a single key sequence. Then the value is a number, the number of events at the front of KEY that compose a complete key. *Note (elisp)Low-Level Key Binding::. This compatibility version allows for KEYMAP to be a list of keymaps, instead of just a singular keymap. -- Macro: compat-call setq-local &rest pairs PAIRS is a list of variable and value pairs. This macro creates a buffer-local binding in the current buffer for each of the variables, and gives them a buffer-local value. It is equivalent to calling ‘make-local-variable’ followed by ‘setq’ for each of the variables. The variables should be unquoted symbols. (setq-local var1 "value1" var2 "value2") *Note (elisp)Creating Buffer-Local::. This compatibility version allows for more than one variable to be set at once, as can be done with ‘setq’. -- Function: compat-call regexp-opt strings &optional paren This function returns an efficient regular expression that will match any of the strings in the list STRINGS. This is useful when you need to make matching or searching as fast as possible—for example, for Font Lock mode. *Note (elisp)Regexp Functions::. The compatibility version of this functions handles the case where STRINGS in an empty list. In that case, a regular expression is generated that never matches anything (see ‘regexp-unmatchable’). -- Function: compat-call file-size-human-readable file-size &optional flavor space unit Return a string with a human readable representation of FILE-SIZE. The optional second argument FLAVOR controls the units and the display format. If FLAVOR is... • ‘si’, each kilobyte is 1000 bytes and the produced suffixes are ‘k’, ‘M’, ‘G’, ‘T’, etc. • ‘iec’, each kilobyte is 1024 bytes and the produced suffixes are ‘KiB’, ‘MiB’, ‘GiB’, ‘TiB’, etc. • ‘nil’ or omitted, each kilobyte is 1024 bytes and the produced suffixes are ‘k’, ‘M’, ‘G’, ‘T’, etc. The compatibility version handles the optional third (SPACE) and forth (UNIT) arguments. The argument SPACE can be a string that is placed between the number and the unit. The argument UNIT determines the unit to use. By default it will be an empty string, unless FLAVOR is ‘iec’, in which case it will be ‘B’. -- Function: compat-call assoc-delete-all key alist &optional test This function is like ‘assq-delete-all’ except that it accepts an optional argument TEST, a predicate function to compare the keys in ALIST. If omitted or ‘nil’, TEST defaults to ‘equal’. As ‘assq-delete-all’, this function often modifies the original list structure of ALIST. *Note (elisp)Association Lists::. This compatibility version handles the optional third (TESTFN) argument. -- Function: compat-call executable-find program &optional remote This function searches for the executable file of the named PROGRAM and returns the absolute file name of the executable, including its file-name extensions, if any. It returns ‘nil’ if the file is not found. The function searches in all the directories in ‘exec-path’, and tries all the file-name extensions in ‘exec-suffixes’ (*note (elisp)Subprocess Creation::). If REMOTE is non-‘nil’, and ‘default-directory’ is a remote directory, PROGRAM is searched on the respective remote host. *Note (elisp)Locating Files::. This compatibility version adds support to handle the optional second (REMOTE) argument. 2.3.3 Missing Definitions ------------------------- Compat does not provide support for the following Lisp features implemented in 27.1: • The functions ‘base64url-encode-*’. • The function ‘decoded-time-add’. • The function ‘decoded-time-set-defaults’. • The function ‘time-convert’. • The macro ‘benchmark-progn’. • Support for ‘condition-case’ to handle t. • The function ‘file-system-info’. • The function ‘group-name’. • The function ‘face-extend-p’ and ‘set-face-extend’. • Additional ‘format-spec’ modifiers. • Support for additional body forms for ‘define-globalized-minor-mode’. • The macro ‘with-connection-local-variables’ and related functionality. • The ‘iso8601’ library. • The ‘exif’ library. • The ‘image-converter’ library.  File: doc0jZUSv.info, Node: Emacs 28.1, Next: Emacs 29.1, Prev: Emacs 27.1, Up: Support 2.4 Emacs 28.1 ============== 2.4.1 Added Definitions ----------------------- The following functions and macros are implemented in Emacs 28.1. These functions are made available by Compat on Emacs versions older than 28.1. The ‘defcustom’ type ‘natnum’ introduced in Emacs 28.1 is made available by Compat. -- Function: process-lines-ignore-status program &rest args This function is just like ‘process-lines’, but does not signal an error if PROGRAM exits with a non-zero exit status. -- Function: process-lines-handling-status program status-handler &rest args Execute PROGRAM with ARGS, returning its output as a list of lines. If STATUS-HANDLER is non-nil, it must be a function with one argument, which will be called with the exit status of the program before the output is collected. If STATUS-HANDLER is nil, an error is signaled if the program returns with a non-zero exit status. -- Function: text-quoting-style You should not read the value of the variable ‘text-quoting-style’ directly. Instead, use this function with the same name to dynamically compute the correct quoting style on the current terminal in the ‘nil’ case described above. -- Function: string-search needle haystack &optional start-pos Return the position of the first instance of NEEDLE in HAYSTACK, both of which are strings. If START-POS is non-‘nil’, start searching from that position in NEEDLE. Return ‘nil’ if no match was found. This function only considers the characters in the strings when doing the comparison; text properties are ignored. Matching is always case-sensitive. -- Function: length= sequence length Return non-‘nil’ if the length of SEQUENCE is equal to LENGTH. -- Function: length< sequence length Return non-‘nil’ if SEQUENCE is shorter than LENGTH. This may be more efficient than computing the length of SEQUENCE if SEQUENCE is a long list. -- Function: length> sequence length Return non-‘nil’ if SEQUENCE is longer than LENGTH. -- Function: file-name-concat directory &rest components Concatenate COMPONENTS to DIRECTORY, inserting a slash before the components if DIRECTORY or the preceding component didn’t end with a slash. (file-name-concat "/tmp" "foo") ⇒ "/tmp/foo" A DIRECTORY or components that are ‘nil’ or the empty string are ignored—they are filtered out first and do not affect the results in any way. This is almost the same as using ‘concat’, but DIRNAME (and the non-final components) may or may not end with slash characters, and this function will not double those characters. -- Function: garbage-collect-maybe factor Suggest to run garbage collection, if _enough_ data has been allocated. This is determined by the positive numerical argument FACTOR, that would proportionally increase the likelihood of garbage collection taking place. This compatibility function does nothing and ignores any suggestion. -- Function: string-replace from-string to-string in-string This function replaces all occurrences of FROM-STRING with TO-STRING in IN-STRING and returns the result. It may return one of its arguments unchanged, a constant string or a new string. Case is significant, and text properties are ignored. -- Function: always &rest arguments This function ignores any ARGUMENTS and returns ‘t’. *Note (elisp)Calling Functions::. -- Function: make-separator-line &optional length Make a string appropriate for usage as a visual separator line. If LENGTH is nil, use the window width. -- Function: insert-into-buffer to-buffer &optional start end This is like ‘insert-buffer-substring’, but works in the opposite direction: The text is copied from the current buffer into TO-BUFFER. The block of text is copied to the current point in TO-BUFFER, and point (in that buffer) is advanced to after the end of the copied text. Is ‘start’/‘end’ is ‘nil’, the entire text in the current buffer is copied over. *Note (elisp)Insertion::. -- Function: replace-string-in-region regexp replacement &optional start end This function replaces all the occurrences of REGEXP with REPLACEMENT in the region of buffer text between START and END; START defaults to position of point, and END defaults to the last accessible position of the buffer. The search for REGEXP is case-sensitive, and REPLACEMENT is inserted without changing its letter-case. The REPLACEMENT string can use the same special elements starting with ‘\’ as ‘replace-match’ does. The function returns the number of replaced occurrences, or ‘nil’ if REGEXP is not found. The function preserves the position of point. (replace-regexp-in-region "foo[ \t]+bar" "foobar") *Note (elisp)Search and Replace::. -- Function: replace-regexp-in-string string replacement &optional start end This function works similarly to ‘replace-regexp-in-region’, but searches for, and replaces, literal STRINGs instead of regular expressions. *Note (elisp)Search and Replace::. -- Function: buffer-local-boundp variable buffer This returns non-‘nil’ if there’s either a buffer-local binding of VARIABLE (a symbol) in buffer BUFFER, or VARIABLE has a global binding. *Note (elisp)Creating Buffer-Local::. -- Macro: with-existing-directory body... This macro ensures that ‘default-directory’ is bound to an existing directory before executing BODY. If ‘default-directory’ already exists, that’s preferred, and otherwise some other directory is used. This macro can be useful, for instance, when calling an external command that requires that it’s running in a directory that exists. The chosen directory is not guaranteed to be writable. *Note (elisp)Testing Accessibility::. -- Macro: dlet (bindings...) forms... This special form is like ‘let’, but it binds all variables dynamically. This is rarely useful—you usually want to bind normal variables lexically, and special variables (i.e., variables that are defined with ‘defvar’) dynamically, and this is what ‘let’ does. ‘dlet’ can be useful when interfacing with old code that assumes that certain variables are dynamically bound (*note (elisp)Dynamic Binding::), but it’s impractical to ‘defvar’ these variables. ‘dlet’ will temporarily make the bound variables special, execute the forms, and then make the variables non-special again. *Note (elisp)Local Variables::. -- Function: ensure-list object This function returns OBJECT as a list. If OBJECT is already a list, the function returns it; otherwise, the function returns a one-element list containing OBJECT. This is usually useful if you have a variable that may or may not be a list, and you can then say, for instance: (dolist (elem (ensure-list foo)) (princ elem)) *Note (elisp)Building Lists::. -- Function: string-clean-whitespace string Clean up the whitespace in STRING by collapsing stretches of whitespace to a single space character, as well as removing all whitespace from the start and the end of STRING. *Note (elisp)Creating Strings::. -- Function: string-fill string length Attempt to Word-wrap STRING so that no lines are longer than LENGTH. Filling is done on whitespace boundaries only. If there are individual words that are longer than LENGTH, these will not be shortened. *Note (elisp)Creating Strings::. -- Function: string-lines string &optional omit-nulls Split STRING into a list of strings on newline boundaries. If the optional argument OMIT-NULLS is non-‘nil’, remove empty lines from the results. Note that this function returns trailing newlines on Emacs 28, use ‘compat-call string-lines’ instead if you want consistent behavior. -- Function: string-pad string length &optional padding start Pad STRING to be of the given LENGTH using PADDING as the padding character. PADDING defaults to the space character. If STRING is longer than LENGTH, no padding is done. If START is ‘nil’ or omitted, the padding is appended to the characters of STRING, and if it’s non-‘nil’, the padding is prepended to STRING’s characters. *Note (elisp)Creating Strings::. -- Function: string-chop-newline string Remove the final newline, if any, from STRING. *Note (elisp)Creating Strings::. -- Macro: named-let name bindings &rest body This special form is a looping construct inspired from the Scheme language. It is similar to ‘let’: It binds the variables in BINDINGS, and then evaluates BODY. However, ‘named-let’ also binds NAME to a local function whose formal arguments are the variables in BINDINGS and whose body is BODY. This allows BODY to call itself recursively by calling NAME, where the arguments passed to NAME are used as the new values of the bound variables in the recursive invocation. Recursive calls to NAME that occur in _tail positions_ in BODY are guaranteed to be optimized as _tail calls_, which means that they will not consume any additional stack space no matter how deeply the recursion runs. Such recursive calls will effectively jump to the top of the loop with new values for the variables. *Note (elisp)Local Variables::. -- Function: file-name-with-extension filename extension This function returns FILENAME with its extension set to EXTENSION. A single leading dot in the EXTENSION will be stripped if there is one. For example: (file-name-with-extension "file" "el") ⇒ "file.el" (file-name-with-extension "file" ".el") ⇒ "file.el" (file-name-with-extension "file.c" "el") ⇒ "file.el" Note that this function will error if FILENAME or EXTENSION are empty, or if the FILENAME is shaped like a directory (i.e., if ‘directory-name-p’ returns non-‘nil’). *Note File Name Components: (elisp)File Name Components. -- Function: directory-empty-p directory This utility function returns ‘t’ if given DIRECTORY is an accessible directory and it does not contain any files, i.e., is an empty directory. It will ignore ‘.’ and ‘..’ on systems that return them as files in a directory. Symbolic links to directories count as directories. See FILE-SYMLINK-P to distinguish symlinks. *Note (elisp)Contents of Directories::. -- Function: format-prompt prompt default &rest format-args Format PROMPT with default value DEFAULT according to the ‘minibuffer-default-prompt-format’ variable. ‘minibuffer-default-prompt-format’ is a format string (defaulting to ‘" (default %s)"’ that says how the “default” bit in prompts like ‘"Local filename (default somefile): "’ are to be formatted. To allow the users to customize how this is displayed, code that prompts the user for a value (and has a default) should look something along the lines of this code snippet: (read-file-name (format-prompt "Local filename" file) nil file) If FORMAT-ARGS is ‘nil’, PROMPT is used as a literal string. If FORMAT-ARGS is non-‘nil’, PROMPT is used as a format control string, and PROMPT and FORMAT-ARGS are passed to ‘format’ (*note (elisp)Formatting Strings::). ‘minibuffer-default-prompt-format’ can be ‘""’, in which case no default values are displayed. If DEFAULT is ‘nil’, there is no default value, and therefore no “default value” string is included in the result value. If DEFAULT is a non-‘nil’ list, the first element of the list is used in the prompt. *Note (elisp)Text from Minibuffer::. -- Function: thing-at-mouse event thing &optional no-properties Mouse-EVENT equivalent of ‘thing-at-point’. THING can be ‘symbol’, ‘list’, ‘sexp’, ‘filename’, ‘url’, ... among other things. When NO-PROPERTIES has a non-‘nil’ value, any text properties that might have been present in the buffer are stripped away. -- Function: bounds-of-thing-at-mouse event thing Determine start and end locations for THING at mouse click given by EVENT. Like ‘bounds-of-thing-at-point’, but tries to use the position in EVENT where the mouse button is clicked to find the thing nearby. -- Function: mark-thing-at-mouse click thing Activate the region around THING found near the mouse CLICK. -- Function: macroexp-file-name Return the name of the file in which the code is currently being evaluated, or ‘nil’ if it cannot be determined. -- Function: macroexp-warn-and-return msg form &optional category compile-only arg Return code equivalent to ‘form’ labeled with warning ‘msg’. -- Macro: with-environment-variables variables body... This macro sets the environment variables according to VARIABLES temporarily when executing BODY. The previous values are restored when the form finishes. The argument VARIABLES should be a list of pairs of strings of the form ‘(VAR VALUE)’, where VAR is the name of the environment variable and VALUE is that variable’s value. (with-environment-variables (("LANG" "C") ("LANGUAGE" "en_US:en")) (call-process "ls" nil t)) *Note System Environment: (elisp)System Environment. -- Function: color-dark-p rgb Whether RGB is more readable against white than black. RGB is a 3-element list (R G B), each component in the range [0,1]. This predicate can be used both for determining a suitable (black or white) contrast color with RGB as background and as foreground. -- Function: color-values-from-color-spec spec Convert the textual color specification SPEC to a color triple ‘(RED GREEN blue)’. Each of RED, GREEN and ‘blue’ is a integer value between 0 and 65535. The specification SPEC can be one of the following • ‘#RGB’, where R, G and B are hex numbers of equal length, 1-4 digits each. • ‘rgb:R/G/B’, where R, G, and B are hex numbers, 1-4 digits each. • ‘rgbi:R/G/B’, where R, G and B are floating-point numbers in [0,1]. -- Function: file-modes-number-to-symbolic modes This function converts a numeric file mode specification in MODES into the equivalent symbolic form. *Note Changing Files: (elisp)Changing Files. -- Function: file-backup-file-names filename This function returns a list of all the backup file names for FILENAME, or ‘nil’ if there are none. The files are sorted by modification time, descending, so that the most recent files are first. *Note (elisp)Backup Names::. -- Function: make-lock-file-name filename Return a string containing a lock file name for FILENAME, obeying ‘lock-file-name-transforms’. -- Function: decoded-time-period time Interpret TIME as a period and return its length in seconds. For computational purposes, years are 365 days long and months are 30 days long. -- Function: subr-primitive-p object Return ‘t’ if OBJECT is a primitive, built-in function. On systems with native compilation ‘subrp’ does not distinguish between built-in functions and functions that have been compiled. If native compilation is not available, this function behaves identically to ‘subrp’. -- Function: subr-native-elisp-p object Return ‘t’ if OBJECT if the object is native compiled lisp. If native compilation is not available, this function always returns ‘nil’. -- Macro: with-window-non-dedicated window &rest body Evaluate BODY with WINDOW temporarily made non-dedicated. If WINDOW is nil, use the selected window. Return the value of the last form in BODY. 2.4.2 Extended Definitions -------------------------- These functions must be called explicitly via ‘compat-call’, since their calling convention or behavior was extended in Emacs 28.1: -- Function: compat-call string-width string &optional from to This function returns the width in columns of the string STRING, if it were displayed in the current buffer and the selected window. Optional arguments FROM and TO specify the substring of STRING to consider, and are interpreted as in ‘substring’ (*note (elisp)Creating Strings::). The return value is an approximation: it only considers the values returned by ‘char-width’ for the constituent characters, always takes a tab character as taking ‘tab-width’ columns, ignores display properties and fonts, etc. *Note (elisp)Size of Displayed Text::. This compatibility version handles the optional arguments FROM and TO. -- Function: compat-call count-windows Return the number of live windows on the selected frame. The optional argument MINIBUF specifies whether the minibuffer window is included in the count. If ALL-FRAMES is non-‘nil’, count the windows in all frames instead just the selected frame. This compatibility version handles the optional argument ALL-FRAMES. 2.4.3 Missing Definitions ------------------------- Compat does not provide support for the following Lisp features implemented in 28.1: • Support for ‘interactive’ or ‘declare’ to list applicable modes. • Support for ‘:interactive’ argument to ‘define-minor-mode’ and ‘define-derived-mode’. • Support for ‘:predicate’ argument to ‘define-globalized-minor-mode’. • Support for the ‘:success’ handler of ‘condition-case’. • The function ‘benchmark-call’. • Additional Edebug keywords. • The libjansson JSON APIs, e.g., ‘json-parse-string’. • The macro ‘pcase-setq’. • The function ‘custom-add-choice’. • The functions ‘dom-print’ and ‘dom-remove-attribute’. • The function ‘dns-query-asynchronous’. • The function ‘get-locale-names’. • The functions ‘mail-header-parse-addresses-lax’ and ‘mail-header-parse-address-lax’. • The function ‘num-processors’. • The function ‘object-intervals’. • The function ‘require-theme’. • The function ‘syntax-class-to-char’. • The function ‘path-separator’. • The function ‘null-device’. • The function ‘macroexp-compiling-p’. • The function ‘split-string-shell-command’. • The function ‘string-limit’. • The functions ‘innermost-minibuffer-p’ and ‘minibuffer-innermost-command-loop-p’. • The function ‘max-mini-window-lines’. • The function ‘lock-file’ and ‘unlock-file’. • The ‘multisession’ library.  File: doc0jZUSv.info, Node: Emacs 29.1, Prev: Emacs 28.1, Up: Support 2.5 Emacs 29.1 ============== 2.5.1 Added Definitions ----------------------- The following functions and macros are implemented in Emacs 29.1. These functions are made available by Compat on Emacs versions older than 29.1. Note that due to upstream changes, it might happen that there will be the need for changes, so use these functions with care. The ‘defcustom’ type ‘key’ introduced in Emacs 28.1 is made available by Compat. -- Function: count-sentences start end Count sentences in current buffer from START to END. -- Function: readablep object This predicate says whether OBJECT has “readable syntax”, i.e., it can be written out and then read back by the Emacs Lisp reader. If it can’t, this function returns ‘nil’; if it can, this function returns a printed representation (via ‘prin1’). -- Function: substitute-quotes string This function works like ‘substitute-command-keys’, but only replaces quote characters. -- Function: get-scratch-buffer-create Return the *scratch* buffer, creating a new one if needed. -- Function: use-region-noncontiguous-p Return non-nil for a non-contiguous region if ‘use-region-p’. -- Function: use-region-end Return the end of the region if ‘use-region-p’. -- Function: use-region-beginning Return the start of the region if ‘use-region-p’. -- Macro: buffer-local-set-state variable value... Minor modes often set buffer-local variables that affect some features in Emacs. When a minor mode is switched off, the mode is expected to restore the previous state of these variables. This convenience macro helps with doing that: It works much like ‘setq-local’, but returns an object that can be used to restore these values back to their previous values/states (using the companion function ‘buffer-local-restore-state’). -- Function: delete-line Delete the current line. -- Function: list-of-strings-p object Return ‘t’ if OBJECT is ‘nil’ or a list of strings. -- Function: plistp object Non-nil if and only if OBJECT is a valid plist. -- Macro: with-memoization PLACE CODE... This macro provides a simple way to do memoization. CODE is evaluated and then stashed in PLACE. If PLACE’s value is non-‘nil’, return that value instead of evaluating CODE. -- Special Form: with-restriction start end [:label label] body This special form saves the current bounds of the accessible portion of the buffer, sets the accessible portion to start at START and end at END, evaluates the BODY forms, and restores the saved bounds. In that case it is equivalent to (save-restriction (narrow-to-region start end) body) When the optional argument LABEL, a symbol, is present, the narrowing is “labeled”. A labeled narrowing differs from a non-labeled one in several ways: • During the evaluation of the BODY form, ‘narrow-to-region’ and ‘widen’ can be used only within the START and END limits. • To lift the restriction introduced by ‘with-restriction’ and gain access to other portions of the buffer, use ‘without-restriction’ with the same LABEL argument. (Another way to gain access to other portions of the buffer is to use an indirect buffer (*note (elisp)Indirect Buffers::).) • Labeled narrowings can be nested. • Labeled narrowings can only be used in Lisp programs: they are never visible on display, and never interfere with narrowings set by the user. If you use ‘with-restriction’ with the optional LABEL argument, we recommend documenting the LABEL in the doc strings of the functions which use it, so that other Lisp programs your code calls could lift the labeled narrowing if and when it needs. -- Special Form: without-restriction [:label label] body This special form saves the current bounds of the accessible portion of the buffer, widens the buffer, evaluates the BODY forms, and restores the saved bounds. In that case it is equivalent to (save-restriction (widen) body) When the optional argument LABEL is present, the narrowing set by ‘with-restriction’ with the same LABEL argument is lifted. -- Function: pos-bol &optional count Like ‘line-beginning-position’, but ignores fields (and is more efficient). -- Function: pos-eol &optional count Like ‘line-end-position’, but ignores fields (and is more efficient). -- Macro: with-delayed-message (timeout message) body... Sometimes it’s unclear whether an operation will take a long time to execute or not, or it can be inconvenient to implement a progress reporter. This macro can be used in those situations. (with-delayed-message (2 (format "Gathering data for %s" entry)) (setq data (gather-data entry))) In this example, if the body takes more than two seconds to execute, the message will be displayed. If it takes a shorter time than that, the message won’t be displayed. In either case, the body is evaluated as normally, and the return value of the final element in the body is the return value of the macro. The MESSAGE element is evaluated before BODY, and is always evaluated, whether the message is displayed or not. -- Function: funcall-with-delayed-message timeout message function Like ‘funcall’, but display MESSAGE if FUNCTION takes longer than TIMEOUT. TIMEOUT is a number of seconds, and can be an integer or a floating point number. If FUNCTION takes less time to execute than TIMEOUT seconds, MESSAGE is not displayed. -- Function: buttonize string callback &optional data help-echo Sometimes it’s more convenient to make a string into a button without inserting it into a buffer immediately, for instance when creating data structures that may then, later, be inserted into a buffer. This function makes STRING into such a string, and CALLBACK will be called when the user clicks on the button. The optional DATA parameter will be used as the parameter when CALLBACK is called. If ‘nil’, the button is used as the parameter instead. -- Function: buttonize-region start end callback &optional data help-echo Make the region between START and END into a button. When clicked, CALLBACK will be called with the DATA as the function argument. If DATA isn’t present (or is nil), the button itself will be used instead as the function argument. If HELP-ECHO, use that as the help-echo property. -- Function: get-display-property position prop &optional object properties This convenience function can be used to get a specific display property, no matter whether the ‘display’ property is a vector, a list or a simple property. This is like ‘get-text-property’ (*note Examining Properties: (elisp)Examining Properties.), but works on the ‘display’ property only. POSITION is the position in the buffer or string to examine, and PROP is the ‘display’ property to return. The optional OBJECT argument should be either a string or a buffer, and defaults to the current buffer. If the optional PROPERTIES argument is non-‘nil’, it should be a ‘display’ property, and in that case, POSITION and OBJECT are ignored. (This can be useful if you’ve already gotten the ‘display’ property with ‘get-char-property’, for instance (*note Examining Properties: (elisp)Examining Properties.). -- Function: add-display-text-property start end prop value &optional object Add display property PROP with VALUE to the text from START to END. If any text in the region has a non-nil ‘display’ property, those properties are retained. If OBJECT is non-‘nil’, it should be a string or a buffer. If ‘nil’, this defaults to the current buffer. -- Function: take n list This function returns the N first elements of LIST. Essentially, it returns the part of LIST that ‘nthcdr’ skips. ‘take’ returns LIST if shorter than N elements; it returns ‘nil’ if N is zero or negative. (take 3 '(a b c d)) ⇒ (a b c) (take 10 '(a b c d)) ⇒ (a b c d) (take 0 '(a b c d)) ⇒ nil -- Function: ntake n list This is a version of ‘take’ that works by destructively modifying the list structure of the argument. That makes it faster, but the original value of LIST may be lost. ‘ntake’ returns LIST unmodified if shorter than N elements; it returns ‘nil’ if N is zero or negative. Otherwise, it returns LIST truncated to its first N elements. This means that it is usually a good idea to use the return value and not just rely on the truncation effect unless N is known to be positive. -- Function: compiled-function-p object This function returns ‘t’ if OBJECT is a function object that is not in the form of ELisp source code but something like machine code or byte code instead. More specifically it returns ‘t’ if the function is built-in, or byte-compiled, or natively-compiled, or a function loaded from a dynamic module. -- Function: function-alias-p object &optional noerror Checks whether OBJECT is a function alias. If it is, it returns a list of symbols representing the function alias chain, else ‘nil’. For instance, if ‘a’ is an alias for ‘b’, and ‘b’ is an alias for ‘c’: (function-alias-p 'a) ⇒ (b c) If there’s a loop in the definitions, an error will be signalled. If NOERROR is non-‘nil’, the non-looping parts of the chain is returned instead. -- Function: string-equal-ignore-case string1 string2 ‘string-equal-ignore-case’ compares strings ignoring case differences, like ‘char-equal’ when ‘case-fold-search’ is ‘t’. *Note (elisp)Text Comparison::. -- Function: string-split string &optional separators omit-nulls trim ‘string-split’ is an alias for the function ‘split-string’. The name follows the convention of other string functions. *Note (elisp)Creating Strings::. -- Function: buffer-match-p condition buffer-or-name &optional arg This function checks if a buffer designated by ‘buffer-or-name’ satisfies a ‘condition’. Optional third argument ARG is passed to the predicate function in CONDITION. A condition can be one of the following: • A string, interpreted as a regular expression. The buffer satisfies the condition if the regular expression matches the buffer name. • A predicate function, which should return non-‘nil’ if the buffer matches. If the function expects one argument, it is called with BUFFER-OR-NAME as the argument; if it expects 2 arguments, the first argument is BUFFER-OR-NAME and the second is ARG (or ‘nil’ if ARG is omitted). • A cons-cell ‘(OPER . EXPR)’ where OPER is one of ‘not’ Satisfied if EXPR doesn’t satisfy ‘buffer-match-p’ with the same buffer and ‘arg’. ‘or’ Satisfied if EXPR is a list and _any_ condition in EXPR satisfies ‘buffer-match-p’, with the same buffer and ‘arg’. ‘and’ Satisfied if EXPR is a list and _all_ conditions in EXPR satisfy ‘buffer-match-p’, with the same buffer and ‘arg’. ‘derived-mode’ Satisfied if the buffer’s major mode derives from EXPR. ‘major-mode’ Satisfied if the buffer’s major mode is equal to EXPR. Prefer using ‘derived-mode’ instead when both can work. • t Satisfied by any buffer. A convenient alternative to ‘""’ (empty string), ‘(and)’ (empty conjunction) or ‘always’. *Note (elisp)Buffer List::. -- Function: match-buffers condition &optional buffers arg This function returns a list of all buffers that satisfy a ‘condition’, as defined for ‘buffer-match-p’. By default all buffers are considered, but this can be restricted via the second optional ‘buffer-list’ argument. Optional third argument ARG will be used by CONDITION in the same way as ‘buffer-match-p’ does. *Note (elisp)Buffer List::. -- Function: string-glyph-split string When character compositions are in effect, sequence of characters can be composed for display to form _grapheme clusters_, for example to display accented characters, or ligatures, or Emoji, or when complex text shaping requires that for some scripts. When that happens, characters no longer map in a simple way to display columns, and display layout decisions with such strings, such as truncating too wide strings, can be a complex job. This function helps in performing suvh jobs: it splits up its argument STRING into a list of substrings, where each substring produces a single grapheme cluster that should be displayed as a unit. Lisp programs can then use this list to construct visually-valid substrings of STRING which will look correctly on display, or compute the width of any substring of STRING by adding the width of its constituents in the returned list, etc. For instance, if you want to display a string without the first glyph, you can say: (apply #'insert (cdr (string-glyph-split string)))) *Note (elisp)Size of Displayed Text::. -- Macro: with-buffer-unmodified-if-unchanged &rest body... Evaluate BODY like ‘progn’, but change buffer-modified status only if buffer text changes. If the buffer was unmodified before execution of BODY, and buffer text after execution of BODY is identical to what it was before, ensure that buffer is still marked unmodified afterwards. Note that only changes in the raw byte sequence of the buffer text, as stored in the internal representation, are monitored for the purpose of detecting the lack of changes in buffer text. Any other changes that are normally perceived as "buffer modifications", such as changes in text properties, ‘buffer-file-coding-system’, buffer multibyteness, etc. – will not be noticed, and the buffer will still be marked unmodified, effectively ignoring those changes. -- Function: file-attribute-file-identifier Return the fields ‘(inodenum device)’ as a list from attributes generated by ‘file-attributes’. *Note (elisp)File Attributes::. -- Function: file-name-split filename This function splits a file name into its components, and can be thought of as the inverse of ‘string-join’ with the appropriate directory separator. For example, (file-name-split "/tmp/foo.txt") ⇒ ("" "tmp" "foo.txt") (string-join (file-name-split "/tmp/foo.txt") "/") ⇒ "/tmp/foo.txt" -- Function: file-name-parent-directory filename This function returns the directory name of the parent directory of FILENAME. If FILENAME is at the root directory of the filesystem, it returns ‘nil’. A relative FILENAME is assumed to be relative to ‘default-directory’, and the return value will also be relative in that case. If the return value is non-‘nil’, it ends in a slash. *Note (elisp)Directory Names::. -- Function: file-has-changed-p file &optional tag This function returns non-‘nil’ if the time stamp of FILENAME has changed since the last call. When called for the first time for some FILENAME, it records the last modification time and size of the file, and returns non-‘nil’ when FILENAME exists. Thereafter, when called for the same FILENAME, it compares the current time stamp and size with the recorded ones, and returns non-‘nil’ only if either the time stamp or the size (or both) are different. This is useful when a Lisp program wants to re-read a file whenever it changes. With an optional argument TAG, which must be a symbol, the size and modification time comparisons are limited to calls with the same tag. *Note (elisp)File Attributes::. -- Function: directory-abbrev-make-regexp directory Create a regexp to match DIRECTORY for ‘directory-abbrev-alist’. -- Function: directory-abbrev-apply filename Apply the abbreviations in ‘directory-abbrev-alist’ to FILENAME. Note that when calling this, you should set ‘case-fold-search’ as appropriate for the filesystem used for FILENAME. -- Function: key-valid-p keys Say whether KEYS is a valid key. A key is a string consisting of one or more key strokes. The key strokes are separated by single space characters. Each key stroke is either a single character, or the name of an event, surrounded by angle brackets. In addition, any key stroke may be preceded by one or more modifier keys. Finally, a limited number of characters have a special shorthand syntax. Here’s some example key sequences. ‘f’ The key ‘f’. ‘S o m’ A three key sequence of the keys ‘S’, ‘o’ and ‘m’. ‘C-c o’ A two key sequence of the keys ‘c’ with the control modifier and then the key ‘o’. ‘H-’ The key named "left" with the hyper modifier. ‘M-RET’ The "return" key with a meta modifier. ‘C-M-’ The "space" key with both the control and meta modifiers. These are the characters that have shorthand syntax: ‘NUL’, ‘RET’, ‘TAB’, ‘LFD’, ‘ESC’, ‘SPC’, ‘DEL’. Modifiers have to be specified in this order Alt (A)-Control (C)-Hyper (H)-Meta (M)-Shift (s)-Super (s) -- Function: key-parse keys Convert KEYS to the internal Emacs key representation. See ‘key-valid-p’ for a description of valid key sequences. Examples include ‘f’, ‘C-c C-c’, ‘H-’, ‘M-RET’ or ‘C-M-’. -- Function: keymap-set keymap key definition This function sets the binding for KEY in KEYMAP. (If KEY is more than one event long, the change is actually made in another keymap reached from KEYMAP.) The argument BINDING can be any Lisp object, but only certain types are meaningful. (For a list of meaningful types, see *note (elisp)Key Lookup::.) The value returned by ‘keymap-set’ is BINDING. If KEY is ‘’, this sets the default binding in KEYMAP. When an event has no binding of its own, the Emacs command loop uses the keymap’s default binding, if there is one. Every prefix of KEY must be a prefix key (i.e., bound to a keymap) or undefined; otherwise an error is signaled. If some prefix of KEY is undefined, then ‘keymap-set’ defines it as a prefix key so that the rest of KEY can be defined as specified. If there was previously no binding for KEY in KEYMAP, the new binding is added at the beginning of KEYMAP. The order of bindings in a keymap makes no difference for keyboard input, but it does matter for menu keymaps (*note (elisp)Menu Keymaps::). *Note (elisp)Changing Key Bindings::. -- Function: keymap-global-set key command This function sets the binding of KEY in the current global map to BINDING. (keymap-global-set KEY BINDING) ≡ (keymap-set (current-global-map) KEY BINDING) *Note (elisp)Key Binding Commands::. -- Function: keymap-local-set key command This function sets the binding of KEY in the current local keymap to BINDING. (keymap-local-set KEY BINDING) ≡ (keymap-set (current-local-map) KEY BINDING) *Note (elisp)Key Binding Commands::. -- Function: keymap-global-unset key &optional remove This function removes the binding of KEY from the current global map. One use of this function is in preparation for defining a longer key that uses KEY as a prefix—which would not be allowed if KEY has a non-prefix binding. For example: (keymap-global-unset "C-l") ⇒ nil (keymap-global-set "C-l C-l" 'redraw-display) ⇒ nil *Note (elisp)Key Binding Commands::. -- Function: keymap-local-unset key &optional remove This function removes the binding of KEY from the current local map. *Note (elisp)Key Binding Commands::. -- Function: keymap-substitute keymap olddef newdef &optional oldmap prefix Replace OLDDEF with NEWDEF for any keys in KEYMAP now defined as OLDDEF. In other words, OLDDEF is replaced with NEWDEF wherever it appears. Alternatively, if optional fourth argument OLDMAP is specified, we redefine in KEYMAP as NEWDEF those keys that are defined as OLDDEF in OLDMAP. -- Function: keymap-lookup keymap key &optional accept-default no-remap position This function returns the definition of KEY in KEYMAP. All the other functions described in this chapter that look up keys use ‘keymap-lookup’. Here are examples: (keymap-lookup (current-global-map) "C-x C-f") ⇒ find-file (keymap-lookup (current-global-map) "C-x C-f 1 2 3 4 5") ⇒ 2 *Note (elisp)Functions for Key Lookup::. -- Function: keymap-local-lookup keys &optional accept-default Like ‘keymap-lookup’, but restricting the search for commands bound to KEYS to the current local keymap. -- Function: keymap-global-lookup keys &optional accept-default Like ‘keymap-lookup’, but restricting the search for commands bound to KEYS to the current global keymap. -- Function: define-keymap &rest definitions You can create a keymap with the functions described above, and then use ‘keymap-set’ (*note (elisp)Changing Key Bindings::) to specify key bindings in that map. When writing modes, however, you frequently have to bind a large number of keys at once, and using ‘keymap-set’ on them all can be tedious and error-prone. Instead you can use ‘define-keymap’, which creates a keymap and binds a number of keys. Here’s a very basic example: (define-keymap "n" #'forward-line "f" #'previous-line "C-c C-c" #'quit-window) This function creates a new sparse keymap, defines the keystrokes in PAIRS, and returns the new keymap. PAIRS is a list of alternating key bindings and key definitions, as accepted by ‘keymap-set’. In addition, the key can be the special symbol ‘:menu’, in which case the definition should be a menu definition as accepted by ‘easy-menu-define’ (*note (elisp)Easy Menu::). Here’s a brief example of this usage: (define-keymap :full t "g" #'eww-reload :menu '("Eww" ["Exit" quit-window t] ["Reload" eww-reload t])) A number of keywords can be used before the key/definition pairs to change features of the new keymap. If any of the feature keywords is missing from the ‘define-keymap’ call, the default value for that feature is ‘nil’. Here’s a list of the available feature keywords: ‘:full’ If non-‘nil’, create a char-table keymap (as from ‘make-keymap’) instead of a sparse keymap (as from ‘make-sparse-keymap’ (*note (elisp)Creating Keymaps::). A sparse keymap is the default. ‘:parent’ If non-‘nil’, the value should be a keymap to use as the parent (*note (elisp)Inheritance and Keymaps::). ‘:keymap’ If non-‘nil’, the value should be a keymap. Instead of creating a new keymap, the specified keymap is modified instead. ‘:suppress’ If non-‘nil’, the keymap will be suppressed with ‘suppress-keymap’ (*note (elisp)Changing Key Bindings::). By default, digits and the minus sign are exempt from suppressing, but if the value is ‘nodigits’, this suppresses digits and minus-sign like it does with other characters. ‘:name’ If non-‘nil’, the value should be a string to use as the menu for the keymap if you use it as a menu with ‘x-popup-menu’ (*note (elisp)Pop-Up Menus::). ‘:prefix’ If non-‘nil’, the value should be a symbol to be used as a prefix command (*note (elisp)Prefix Keys::). If this is the case, this symbol is returned by ‘define-keymap’ instead of the map itself. -- Function: defvar-keymap (variable-name &rest defs) By far, the most common thing to do with a keymap is to bind it to a variable. This is what virtually all modes do—a mode called ‘foo’ almost always has a variable called ‘foo-mode-map’. This macro defines NAME as a variable, passes OPTIONS and PAIRS to ‘define-keymap’, and uses the result as the default value for the variable. OPTIONS is like the keywords in ‘define-keymap’, but there’s an additional ‘:doc’ keyword that provides the doc string for the defined variable. Here’s an example: (defvar-keymap eww-textarea-map :parent text-mode-map "RET" #'forward-line "TAB" #'shr-next-link) -- Macro: while-let spec then-forms... Like ‘when-let’, but repeat until a binding in SPEC is ‘nil’. The return value is always ‘nil’. This is comparable to ‘and-let*’. -- Macro: ert-with-temp-file name &rest body Bind NAME to the name of a new temporary file and evaluate BODY. Delete the temporary file after BODY exits normally or non-locally. NAME will be bound to the file name of the temporary file. See the docstring for supported keyword arguments. -- Macro: ert-with-temp-directory name &rest body Bind NAME to the name of a new temporary directory and evaluate BODY. Delete the temporary directory after BODY exits normally or non-locally. NAME is bound to the directory name, not the directory file name. (In other words, it will end with the directory delimiter; on Unix-like systems, it will end with "/".) The same keyword arguments are supported as in ‘ert-with-temp-file’ (which see), except for ‘:text’. -- Function: cl-constantly value Return a function that takes any number of arguments, but returns VALUE. -- Macro: cl-with-gensyms names... body This macro expands to code that executes BODY with each of the variables in NAMES bound to a fresh uninterned symbol, or “gensym”, in Common Lisp parlance. For macros requiring more than one gensym, use of ‘cl-with-gensyms’ shortens the code and renders one’s intentions clearer. Compare: (defmacro my-macro (foo) (let ((bar (gensym "bar")) (baz (gensym "baz")) (quux (gensym "quux"))) `(let ((,bar (+ ...))) ...))) (defmacro my-macro (foo) (cl-with-gensyms (bar baz quux) `(let ((,bar (+ ...))) ...))) -- Macro: cl-once-only ((variable form)...) body This macro is primarily to help the macro programmer ensure that forms supplied by the user of the macro are evaluated just once by its expansion even though the result of evaluating the form is to occur more than once. Less often, this macro is used to ensure that forms supplied by the macro programmer are evaluated just once. Each VARIABLE may be used to refer to the result of evaluating FORM in BODY. ‘cl-once-only’ binds each VARIABLE to a fresh uninterned symbol during the evaluation of BODY. Then, ‘cl-once-only’ wraps the final expansion in code to evaluate each FORM and bind the result to the corresponding uninterned symbol. Thus, when the macro writer substitutes the value for VARIABLE into the expansion they are effectively referring to the result of evaluating FORM, rather than FORM itself. Another way to put this is that each VARIABLE is bound to an expression for the (singular) result of evaluating FORM. The most common case is where VARIABLE is one of the arguments to the macro being written, so ‘(variable variable)’ may be abbreviated to just ‘variable’. For example, consider this macro: (defmacro my-list (x y &rest forms) (let ((x-result (gensym)) (y-result (gensym))) `(let ((,x-result ,x) (,y-result ,y)) (list ,x-result ,y-result ,x-result ,y-result (progn ,@forms)))) In a call like ‘(my-list (pop foo) ...)’ the intermediate binding to ‘x-result’ ensures that the ‘pop’ is not done twice. But as a result the code is rather complex: the reader must keep track of how ‘x-result’ really just means the first parameter of the call to the macro, and the required use of multiple gensyms to avoid variable capture by ‘(progn ,@forms)’ obscures things further. ‘cl-once-only’ takes care of these details: (defmacro my-list (x y &rest forms) (cl-once-only (x y) `(list ,x ,y ,x ,y (progn ,@forms)))) 2.5.2 Extended Definitions -------------------------- These functions must be called explicitly via ‘compat-call’, since their calling convention or behavior was extended in Emacs 29.1: -- Function: compat-call set-transient-map keymap &optional keep-pred on-exit message timeout This function adds KEYMAP as a “transient” keymap, which takes precedence over other keymaps for one (or more) subsequent keys. Normally, KEYMAP is used just once, to look up the very next key. If the optional argument KEEP-PRED is ‘t’, the map stays active as long as the user types keys defined in KEYMAP; when the user types a key that is not in KEYMAP, the transient keymap is deactivated and normal key lookup continues for that key. The KEEP-PRED argument can also be a function. In that case, the function is called with no arguments, prior to running each command, while KEYMAP is active; it should return non-‘nil’ if KEYMAP should stay active. The optional argument ON-EXIT, if non-‘nil’, specifies a function that is called, with no arguments, after KEYMAP is deactivated. The optional argument MESSAGE specifies the message to display after activating the transient map. If MESSAGE is a string, it is the format string for the message, and any ‘%k’ specifier in that string is replaced with the list of keys from the transient map. Any other non-‘nil’ value of MESSAGE stands for the default message format ‘Repeat with %k’. If the optional argument TIMEOUT is non-‘nil’, it should be a number that specifies how many seconds of idle time to wait before deactivating KEYMAP. The value of the variable ‘set-transient-map-timeout’, if non-‘nil’, overrides the value of this argument. This function works by adding and removing KEYMAP from the variable ‘overriding-terminal-local-map’, which takes precedence over all other active keymaps (*note (Searching Keymaps)elisp::). -- Function: compat-call string-lines string &optional omit-nulls keep-newlines Split STRING into a list of strings on newline boundaries. If the optional argument OMIT-NULLS is non-‘nil’, remove empty lines from the results. If the optional argument KEEP-NEWLINES is non-‘nil’, don’t remove the trailing newlines from the result strings. *Note (elisp)Creating Strings::. -- Function: compat-call define-key This function is like ‘keymap-set’ (*note (elisp)Changing Key Bindings::, but understands only the legacy key syntaxes. In addition, this function also has a REMOVE argument. If it is non-‘nil’, the definition will be removed. This is almost the same as setting the definition to ‘nil’, but makes a difference if the KEYMAP has a parent, and KEY is shadowing the same binding in the parent. With REMOVE, subsequent lookups will return the binding in the parent, whereas with a ‘nil’ definition the lookups will return ‘nil’. *Note (elisp)Low-Level Key Binding::. This compatibility version handles the optional argument REMOVE. -- Function: compat-call plist-get plist prop &optional predicate This returns the value of the PROPERTY property stored in the property list PLIST. Comparisons are done with PREDICATE, and defaults to ‘eq’. It accepts a malformed PLIST argument. If PROPERTY is not found in the PLIST, it returns ‘nil’. *Note (elisp)Plist Access::. This compatibility version handles the optional argument PREDICATE. This is a generalized variable (*note (elisp)Generalized Variables::) that can be used to change a value with ‘setf’. -- Function: compat-call plist-put plist prop val &optional predicate This stores VALUE as the value of the PROPERTY property in the property list PLIST. Comparisons are done with PREDICATE, and defaults to ‘eq’. It may modify PLIST destructively, or it may construct a new list structure without altering the old. The function returns the modified property list, so you can store that back in the place where you got PLIST. *Note (elisp)Plist Access::. This compatibility version handles the optional argument PREDICATE. -- Function: compat-call plist-member plist prop &optional predicate This returns non-‘nil’ if PLIST contains the given PROPERTY. Comparisons are done with PREDICATE, and defaults to ‘eq’. Unlike ‘plist-get’, this allows you to distinguish between a missing property and a property with the value ‘nil’. The value is actually the tail of PLIST whose ‘car’ is PROPERTY. *Note (elisp)Plist Access::. This compatibility version handles the optional argument PREDICATE. 2.5.3 Missing Definitions ------------------------- Compat does not provide support for the following Lisp features implemented in 29.1: • The function ‘imagep’. • The function ‘image-at-point-p’. • The function ‘function-documentation’. • The macro ‘with-undo-amalgamate’. • The function ‘string-glyph-split’. • The function ‘string-limit’. • The function ‘string-pixel-width’ and ‘buffer-text-pixel-size’. • The function ‘minibuffer-lazy-highlight-setup’. • The function ‘pp-emacs-lisp-code’. • The functions ‘xdg-state-home’, ‘xdg-current-desktop’ and ‘xdg-session-type’. • The macro ‘setopt’. • The ‘oclosure’ library. • The ‘textsec’ library. • The ‘range’ library. • The ‘string-edit’ library. • The ‘vtable’ library. • The ‘pixel-fill’ library.  File: doc0jZUSv.info, Node: Development, Next: Function Index, Prev: Support, Up: Top 3 Development ************* Compat is developed on GitHub. Bug reports, patches and comments are best sent to the issue tracker (https://github.com/emacs-compat/compat/issues). These may include issues in the compatibility code, missing definitions or performance issues. We also provide a development mailing list (https://lists.sr.ht/~pkal/compat-devel) (~pkal/compat-devel@lists.sr.ht <~pkal/compat-devel@lists.sr.ht>). Please note that as a GNU ELPA package, Compat requires contributors to have signed the FSF copyright assignment (https://www.gnu.org/software/emacs/manual/html_node/emacs/Copyright-Assignment.html), before any non-trivial contribution (roughly 15 lines of code) can be applied. It is important that you provide tests when you contribute new functionality. Compat has 100% test coverage by the test suite. We use continuous integration to check if patches preserve existing functionality.  File: doc0jZUSv.info, Node: Function Index, Next: Variable Index, Prev: Development, Up: Top Appendix A Function Index ************************* [index] * Menu: * add-display-text-property: Emacs 29.1. (line 178) * alist-get: Emacs 25.1. (line 82) * always: Emacs 28.1. (line 83) * and-let*: Emacs 26.1. (line 158) * assoc-delete-all: Emacs 26.1. (line 13) * bignump: Emacs 27.1. (line 55) * bool-vector: Emacs 25.1. (line 178) * bounds-of-thing-at-mouse: Emacs 28.1. (line 292) * buffer-hash: Emacs 26.1. (line 80) * buffer-local-boundp: Emacs 28.1. (line 125) * buffer-local-restore-state: Emacs 29.1. (line 42) * buffer-local-set-state: Emacs 29.1. (line 42) * buffer-match-p: Emacs 29.1. (line 246) * buttonize: Emacs 29.1. (line 144) * buttonize-region: Emacs 29.1. (line 153) * cl-constantly: Emacs 29.1. (line 618) * cl-once-only: Emacs 29.1. (line 641) * cl-with-gensyms: Emacs 29.1. (line 622) * color-dark-p: Emacs 28.1. (line 323) * color-values-from-color-spec: Emacs 28.1. (line 329) * compat-call: Usage. (line 43) * compat-call <1>: Emacs 26.1. (line 278) * compat-call alist-get: Emacs 26.1. (line 344) * compat-call assoc: Emacs 26.1. (line 316) * compat-call assoc-delete-all: Emacs 27.1. (line 417) * compat-call count-windows: Emacs 28.1. (line 405) * compat-call define-key: Emacs 29.1. (line 738) * compat-call executable-find: Emacs 27.1. (line 429) * compat-call file-size-human-readable: Emacs 27.1. (line 397) * compat-call line-number-at-pos: Emacs 26.1. (line 330) * compat-call lookup-key: Emacs 27.1. (line 356) * compat-call plist-get: Emacs 29.1. (line 754) * compat-call plist-member: Emacs 29.1. (line 778) * compat-call plist-put: Emacs 29.1. (line 766) * compat-call recenter: Emacs 27.1. (line 346) * compat-call regexp-opt: Emacs 27.1. (line 385) * compat-call set-transient-map: Emacs 29.1. (line 693) * compat-call setq-local: Emacs 27.1. (line 370) * compat-call sort: Emacs 25.1. (line 190) * compat-call string-lines: Emacs 29.1. (line 729) * compat-call string-trim: Emacs 26.1. (line 375) * compat-call string-trim-left: Emacs 26.1. (line 359) * compat-call string-trim-right: Emacs 26.1. (line 367) * compat-call string-width: Emacs 28.1. (line 388) * compat-function: Usage. (line 51) * compiled-function-p: Emacs 29.1. (line 214) * count-sentences: Emacs 29.1. (line 17) * cXXXr: Emacs 26.1. (line 66) * cXXXXr: Emacs 26.1. (line 67) * date-days-in-month: Emacs 27.1. (line 213) * date-ordinal-to-time: Emacs 27.1. (line 220) * decoded-time-day: Emacs 27.1. (line 175) * decoded-time-dst: Emacs 27.1. (line 195) * decoded-time-hour: Emacs 27.1. (line 170) * decoded-time-minute: Emacs 27.1. (line 165) * decoded-time-month: Emacs 27.1. (line 180) * decoded-time-period: Emacs 28.1. (line 360) * decoded-time-second: Emacs 27.1. (line 160) * decoded-time-weekday: Emacs 27.1. (line 190) * decoded-time-year: Emacs 27.1. (line 185) * decoded-time-zone: Emacs 27.1. (line 200) * define-keymap: Emacs 29.1. (line 506) * defvar-keymap: Emacs 29.1. (line 574) * delete-line: Emacs 29.1. (line 51) * directory-abbrev-apply: Emacs 29.1. (line 370) * directory-abbrev-make-regexp: Emacs 29.1. (line 367) * directory-empty-p: Emacs 28.1. (line 243) * directory-name-p: Emacs 25.1. (line 56) * dlet: Emacs 28.1. (line 143) * dolist-with-progress-reporter: Emacs 27.1. (line 119) * ensure-list: Emacs 28.1. (line 158) * ert-with-temp-directory: Emacs 29.1. (line 606) * ert-with-temp-file: Emacs 29.1. (line 600) * file-attribute-access-time: Emacs 26.1. (line 223) * file-attribute-collect: Emacs 26.1. (line 260) * file-attribute-device-number: Emacs 26.1. (line 255) * file-attribute-file-identifier: Emacs 29.1. (line 327) * file-attribute-group-id: Emacs 26.1. (line 218) * file-attribute-inode-number: Emacs 26.1. (line 250) * file-attribute-link-number: Emacs 26.1. (line 208) * file-attribute-modes: Emacs 26.1. (line 245) * file-attribute-modification-time: Emacs 26.1. (line 228) * file-attribute-size: Emacs 26.1. (line 240) * file-attribute-status-change-time: Emacs 26.1. (line 234) * file-attribute-type: Emacs 26.1. (line 203) * file-attribute-user-id: Emacs 26.1. (line 213) * file-backup-file-names: Emacs 28.1. (line 348) * file-has-changed-p: Emacs 29.1. (line 352) * file-local-name: Emacs 26.1. (line 167) * file-modes-number-to-symbolic: Emacs 28.1. (line 342) * file-name-concat: Emacs 28.1. (line 53) * file-name-parent-directory: Emacs 29.1. (line 343) * file-name-quote: Emacs 26.1. (line 102) * file-name-quoted-p: Emacs 26.1. (line 95) * file-name-split: Emacs 29.1. (line 333) * file-name-unquote: Emacs 26.1. (line 90) * file-name-with-extension: Emacs 28.1. (line 225) * file-size-human-readable-iec: Emacs 27.1. (line 251) * fixnump: Emacs 27.1. (line 60) * flatten-tree: Emacs 27.1. (line 132) * format-message: Emacs 25.1. (line 44) * format-prompt: Emacs 28.1. (line 254) * funcall-with-delayed-message: Emacs 29.1. (line 136) * function-alias-p: Emacs 29.1. (line 221) * garbage-collect-maybe: Emacs 28.1. (line 68) * gensym: Emacs 26.1. (line 70) * get-display-property: Emacs 29.1. (line 161) * get-scratch-buffer-create: Emacs 29.1. (line 30) * hash-table-empty: Emacs 25.1. (line 120) * if-let: Emacs 25.1. (line 97) * if-let*: Emacs 26.1. (line 149) * ignore-errors: Emacs 27.1. (line 106) * image-property: Emacs 26.1. (line 198) * insert-into-buffer: Emacs 28.1. (line 92) * key-parse: Emacs 29.1. (line 407) * key-valid-p: Emacs 29.1. (line 375) * keymap-global-lookup: Emacs 29.1. (line 502) * keymap-global-set: Emacs 29.1. (line 436) * keymap-global-unset: Emacs 29.1. (line 456) * keymap-local-lookup: Emacs 29.1. (line 498) * keymap-local-set: Emacs 29.1. (line 446) * keymap-local-unset: Emacs 29.1. (line 471) * keymap-lookup: Emacs 29.1. (line 485) * keymap-set: Emacs 29.1. (line 412) * keymap-substitute: Emacs 29.1. (line 477) * length<: Emacs 28.1. (line 45) * length=: Emacs 28.1. (line 42) * length>: Emacs 28.1. (line 50) * list-of-strings-p: Emacs 29.1. (line 54) * macroexp-file-name: Emacs 28.1. (line 301) * macroexp-parse: Emacs 25.1. (line 175) * macroexp-quote: Emacs 25.1. (line 172) * macroexp-warn-and-return: Emacs 28.1. (line 305) * macroexpand-1: Emacs 25.1. (line 165) * major-mode-restore: Emacs 27.1. (line 22) * major-mode-suspend: Emacs 27.1. (line 13) * make-empty-file: Emacs 27.1. (line 254) * make-lock-file-name: Emacs 28.1. (line 356) * make-nearby-temp-file: Emacs 26.1. (line 120) * make-separator-line: Emacs 28.1. (line 88) * mapcan: Emacs 26.1. (line 53) * mark-thing-at-mouse: Emacs 28.1. (line 298) * match-buffers: Emacs 29.1. (line 280) * minibuffer-history-value: Emacs 27.1. (line 32) * named-let: Emacs 28.1. (line 207) * ntake: Emacs 29.1. (line 201) * package-get-version: Emacs 27.1. (line 205) * plistp: Emacs 29.1. (line 57) * pos-bol: Emacs 29.1. (line 111) * pos-eol: Emacs 29.1. (line 115) * process-lines-handling-status: Emacs 28.1. (line 20) * process-lines-ignore-status: Emacs 28.1. (line 16) * proper-list-p: Emacs 27.1. (line 76) * provided-mode-derived-p: Emacs 27.1. (line 247) * read-answer: Emacs 26.1. (line 17) * read-char-from-minibuffer: Emacs 27.1. (line 44) * read-multiple-choice: Emacs 26.1. (line 185) * readablep: Emacs 29.1. (line 20) * region-bounds: Emacs 25.1. (line 28) * region-noncontiguous-p: Emacs 25.1. (line 34) * replace-regexp-in-string: Emacs 28.1. (line 117) * replace-string-in-region: Emacs 28.1. (line 102) * ring-resize: Emacs 27.1. (line 28) * save-mark-and-excursion: Emacs 25.1. (line 39) * string-chop-newline: Emacs 28.1. (line 202) * string-clean-whitespace: Emacs 28.1. (line 171) * string-distance: Emacs 27.1. (line 86) * string-equal-ignore-case: Emacs 29.1. (line 234) * string-fill: Emacs 28.1. (line 178) * string-glyph-split: Emacs 29.1. (line 289) * string-greaterp: Emacs 25.1. (line 64) * string-lines: Emacs 28.1. (line 186) * string-pad: Emacs 28.1. (line 193) * string-replace: Emacs 28.1. (line 77) * string-search: Emacs 28.1. (line 34) * string-split: Emacs 29.1. (line 240) * subr-native-elisp-p: Emacs 28.1. (line 372) * subr-primitive-p: Emacs 28.1. (line 365) * substitute-quotes: Emacs 29.1. (line 26) * take: Emacs 29.1. (line 187) * temporary-file-directory: Emacs 26.1. (line 137) * text-property-search-backward: Emacs 27.1. (line 332) * text-property-search-forward: Emacs 27.1. (line 260) * text-quoting-style: Emacs 28.1. (line 28) * thing-at-mouse: Emacs 28.1. (line 285) * thread-first: Emacs 25.1. (line 123) * thread-last: Emacs 25.1. (line 144) * time-equal-p: Emacs 27.1. (line 208) * use-region-beginning: Emacs 29.1. (line 39) * use-region-end: Emacs 29.1. (line 36) * use-region-noncontiguous-p: Emacs 29.1. (line 33) * when-let: Emacs 25.1. (line 115) * when-let*: Emacs 26.1. (line 153) * while-let: Emacs 29.1. (line 594) * with-buffer-unmodified-if-unchanged: Emacs 29.1. (line 312) * with-delayed-message: Emacs 29.1. (line 119) * with-environment-variables: Emacs 28.1. (line 309) * with-existing-directory: Emacs 28.1. (line 132) * with-file-modes: Emacs 25.1. (line 71) * with-memoization: Emacs 29.1. (line 60) * with-minibuffer-selected-window: Emacs 27.1. (line 38) * with-restriction: Emacs 29.1. (line 65) * with-suppressed-warnings: Emacs 27.1. (line 65) * with-window-non-dedicated: Emacs 28.1. (line 377) * without-restriction: Emacs 29.1. (line 99) * xor: Emacs 27.1. (line 142)  File: doc0jZUSv.info, Node: Variable Index, Prev: Function Index, Up: Top Appendix B Variable Index ************************* [index] * Menu: * exec-path: Emacs 27.1. (line 228) * gensym-counter: Emacs 26.1. (line 77) * mounted-file-systems: Emacs 26.1. (line 133) * regexp-unmatchable: Emacs 27.1. (line 152) * set-transient-map-timeout: Emacs 29.1. (line 719) * text-quoting-style: Emacs 25.1. (line 13)  Tag Table: Node: Top829 Node: Introduction2258 Node: Overview2421 Node: Usage2947 Node: Limitations7161 Node: Support11945 Node: Emacs 25.112530 Node: Emacs 26.121932 Node: Emacs 27.139184 Node: Emacs 28.159581 Node: Emacs 29.179251 Node: Development115649 Node: Function Index116669 Node: Variable Index131882  End Tag Table  Local Variables: coding: utf-8 End: