From f1046c8877dec7a93da4bda7aeb5ac575c2b2c03 Mon Sep 17 00:00:00 2001 From: KemoNine Date: Mon, 17 Aug 2020 17:13:15 -0400 Subject: [PATCH] Add some additional notes for the LTE stuff --- docs/lte.md | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/docs/lte.md b/docs/lte.md index e861c71..46f7b21 100644 --- a/docs/lte.md +++ b/docs/lte.md @@ -9,13 +9,10 @@ The below assumes [ting](https://ting.com) as the carrier. You'll need to hunt d Hardware we have used / tested in the past. * [GNSS, GLONASS, Galileo, Beidou Antenna](https://www.mouser.com/ProductDetail/673-GPSMOD1333) +* [LTE Antenna](https://www.mouser.com/ProductDetail/PulseLarsen-Antennas/W3929B0100?qs=%2Fha2pyFadui0F6I35f4CdWnof9NzfgKZj9Yqo8uf8nJdopXYV%252Bi3sw%3D%3D) * [Quectel EC25](https://www.quectel.com/product/ec25minipcie.htm) +* [Quectel BG95-M3](https://www.quectel.com/product/bg95minipcIe.htm) * [sixfab Raspberry Pi LTE Base Hat](https://sixfab.com/product/raspberry-pi-base-hat-3g-4g-lte-minipcie-cards/) -* [SMA antenna pigtails](https://www.mouser.com/ProductDetail/960-CAB011) -* [LTE blade antennas](https://www.mouser.com/ProductDetail/237-SREL036-S9P) -* [RAK Quectel BG96 IoT LTE Modem](https://store.rakwireless.com/products/rak8213-nb-iot-bg96) -* [RAK IoT LTE Modem Raspberry Pi Hat](https://store.rakwireless.com/products/rak8213-pi-hat) -* [PulseLarsen LTE Sticker Antenna](https://www.mouser.com/ProductDetail/673-W6112B0100) ## Setup / Configuration @@ -40,4 +37,14 @@ mmcli -m 0 --location-enable-3gpp mmcli -m 0 --location-enable-gps-nmea mmcli -m 0 --location-get +apt install libqmi-utils +qmicli -d /dev/cdc-wdm0 -p --nas-get-rf-band-info +qmicli -d /dev/cdc-wdm0 -p --nas-get-system-selection-preference +qmicli -d /dev/cdc-wdm0 -p --nas-get-serving-system +qmicli -d /dev/cdc-wdm0 -p --nas-get-system-info +qmicli -d /dev/cdc-wdm0 -p --nas-get-technology-preference +qmicli -d /dev/cdc-wdm0 -p --nas-get-signal-info +qmicli -d /dev/cdc-wdm0 -p --nas-get-home-network +qmicli -d /dev/cdc-wdm0 -p --nas-get-system-info + ```