Add new monitors, update docs to layout which monitors are being tested/verified working and remove panels that are not going to be supported over time

docs/finalize_setup.md

@@ -18,21 +18,33 @@ nano -w /boot/firmware/cmdline.txt
 # Setup screen resolution (UNCOMMENT THE RIGHT LINES!!!)
 cat >> /boot/firmware/usercfg.txt <<EOF
 
+# Setup GPU general settings
+gpu_mem=512
+disable_overscan=1
+
+# Screen Settings
 #     Further reading
 #     https://www.raspberrypi.org/documentation/configuration/config-txt/video.md
 #     https://www.raspberrypi.org/forums/viewtopic.php?t=5851
 #     https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=24679
 
-# GeeekPi 5 Inch Capacitive Touch Screen 800x480 HDMI Monitor
+# CONFU 5.5" 2k (1440x2560)
-#hdmi_group=2
+#     https://www.alibaba.com/product-detail/CONFU-HDMI-to-MIPI-5-5_62010868927.html
-#hdmi_mode=87
-#hdmi_cvt=800 480 60 6 0 0 0
-
-# CONFU 5.5" 2k (1440x2560) LCD
 #dtoverlay=vc4-kms-v3d-pi4
-#hdmi_cvt=1440 2560 50 3 0 0 1
 #hdmi_group=2
 #hdmi_mode=87
+#hdmi_cvt=1440 2560 50 3 0 0 1
+
+# Electric Magic 8.9" 2k (2560x1600)
+#     https://www.amazon.com/gp/product/B082YFY8PW
+#hdmi_group=2
+#hdmi_mode=76
+#max_framebuffer_height=2560
+#max_framebuffer_width=2560
+#framebuffer_width=2560
+#framebuffer_height=1600
+#framebuffer_depth=32
+#framebuffer_ignore_alpha=1
 EOF
 
 # Reboot to pickup changes

hardware.md

@@ -5,9 +5,12 @@ This is a surprisingly straight forward project that has minimal in the way of h
 * [Raspberry Pi 4](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) with at least 2Gb of RAM
   * An equivalent board with at least 2Gb of RAM capable of running Ubuntu 64bit Linux can be used instead but we do not support anything but the Raspberry Pi 4 at this time
   * **Please note: RAM usage is significantly affected by source image resolution /and/ panel size. 2Gb of RAM should be enough for a 2k screen and 20Mpx source images. If you're not sure get a 4Gb Raspberry Pi.**
-* HDMI Monitor
+* HDMI Monitor (Verified Working)
-  * Please note: *all* of these displays are ordered or on-hand for verification and testing they work for the PiFrames
+  * Please note: **these are the panels we KNOW WORK** ; do not deviate unless you want to fiddle with a lot of boot loader configuration
-  * [CONFU 5.5" 2k panel](https://www.alibaba.com/product-detail/CONFU-HDMI-to-MIPI-5-5_62010868927.html)
+  * [CONFU 5.5" 2k (1440x2560)](https://www.alibaba.com/product-detail/CONFU-HDMI-to-MIPI-5-5_62010868927.html)
+  * [Electric Magic 8.9" 2k (2560x1600)](https://www.amazon.com/gp/product/B082YFY8PW)
+* HDMI Monitor (TESTING)
+  * Please note: **these are the panels we are TESTING** ; do not use these unless you'd like to help us sort the settings needed for use
   * [Generic 5.5" 1080p panel](https://www.alibaba.com/product-detail/Low-price-5-5-inch-Sharp_62399659373.html)
 * [Geekworm Armor Case](https://geekworm.com/products/raspberry-pi-4-model-b-armor-aluminum-alloy-case-protective-shell)
   * If you would like an always on fan, select the model with the integrated fan option