Merge stateless idea with no local storage of public and private keys, support multiple interface per hosts using several groups (#29)

* merge stateless with no storage of local priv key

* Delete locally stored private key

* add reload module on update config file

* privatekey template is not used anymore

* remove all local keys priv and public

* use ansible_play_hosts instead of hardcoded vpn grp
should use the group in the play calling the role.
works fine when hosts bellong to several groups

* Clean tasks names

* add tag, and cleanup

* fix private key creation

* Support for mutliple wireguard vpn on same host
add inventory exemple in readme

* fix typo, add some comment on inventory

* add  wg-config tag to Check config:
allow  run  with -t - wg-config

* Update tasks/main.yml

Co-Authored-By: Robert Wimmer <2039811+githubixx@users.noreply.github.com>

* remove trailing whitespace

* Update templates/wg.conf.j2

Co-Authored-By: Robert Wimmer <2039811+githubixx@users.noreply.github.com>

* Update templates/wg.conf.j2

Co-Authored-By: Robert Wimmer <2039811+githubixx@users.noreply.github.com>

* changes after githubixx code review

* readd new line to separate peers in config

CHANGELOG.md

@@ -1,6 +1,13 @@
 Changelog
 ---------
 
+**4.0.0**
+
+- While the changes introduced are backwards compatible in general if you stay with your current settings some variables are no longer needed. So this is partly a breaking change and therefore justifies a new major version.
+- Support multiple Wireguard interfaces. See README for examples (contribution by fbourqui)
+- Make role stateless: In the previous versions the private and public keys of the Wireguard hosts were stored locally in the directory defined with the `wireguard_cert_directory` variable. This is no longer the case. The variables `wireguard_cert_directory`, `wireguard_cert_owner` and `wireguard_cert_group` are no longer needed and were removed. If you used this role before this release it's safe to remove them from your settings. The directory that was defined with the `wireguard_cert_directory` variable will be kept. While not tested it may enable you to go back to an older version of this role and it should still work (contribution by fbourqui)
+- Reminder: `wireguard_cert_directory` default was `~/wireguard/certs`. Public and Private keys where stored on the host running ansible playbook. As a security best practice private keys of all your WireGuard endpoints should not be kept locally.
+
 **3.2.2**
 
 - remove unneeded `with_inventory_hostnames` loops (thanks to pierreozoux for initial PR)

README.md

@@ -27,28 +27,16 @@ see [CHANGELOG.md](https://github.com/githubixx/ansible-role-wireguard/blob/mast
 Role Variables
 --------------
 
-This variables can be changed in `group_vars/`:
+Those variables can be changed in `group_vars/`:
 
 ```
-# The LOCAL directory where the WireGuard certificates are stored after they
-# were generated. By default this will expand to user's LOCAL ${HOME}
-# (the user that run's "ansible-playbook" command) plus
-# "/wireguard/certs". That means if the user's ${HOME} directory is e.g.
-# "/home/da_user" then "wireguard_cert_directory" will have a value of
-# "/home/da_user/wireguard/certs". If you change this make sure that
-# the parent directory is writable by the user that runs "ansible-playbook"
-# command.
-wireguard_cert_directory: "{{ '~/wireguard/certs' | expanduser }}"
-wireguard_cert_owner: "root"
-wireguard_cert_group: "root"
-
 # Directory to store WireGuard configuration on the remote hosts
 wireguard_remote_directory: "/etc/wireguard"
 
-# The port WireGuard will listen on.
+# The default port WireGuard will listen if not specified otherwise.
 wireguard_port: "51820"
 
-# The interface name that wireguard should use.
+# The default interface name that wireguard should use if not specified otherwise.
 wireguard_interface: "wg0"
 ```
 
@@ -252,6 +240,53 @@ Example Playbook
     - wireguard
 ```
 
+Example Inventory using 2 different WireGuard interfaces on host multi
+----------------------------------------------------------------------
+
+This is a complex example using yaml inventory format
+
+```
+vpn1:
+  hosts:
+    multi:
+      wireguard_address: 10.9.0.1/32
+      wireguard_allowed_ips: "10.9.0.1/32, 192.168.2.0/24"
+      wireguard_endpoint: multi.exemple.com
+    nated:
+      wireguard_address: 10.9.0.2/32
+      wireguard_allowed_ips: "10.9.0.2/32, 192.168.3.0/24"
+      wireguard_persistent_keepalive: 15
+      wireguard_endpoint: nated.exemple.com
+      wireguard_postup: "iptables -t nat -A POSTROUTING -o ens12 -j MASQUERADE"
+      wireguard_postdown: "iptables -t nat -D POSTROUTING -o ens12 -j MASQUERADE"
+vpn2:
+  hosts:
+    multi-wg1: # use a different name, and define ansible_host, to avoid mixing of vars without needing to prefix vars with interface name
+      ansible_host: multi
+      wireguard_interface: wg1
+      wireguard_port: 51821 # when using several interface on one host, we must use different ports
+      wireguard_address: 10.9.1.1/32
+      wireguard_endpoint: multi.exemple.com
+    another:
+      wireguard_address: 10.9.1.2/32
+      wireguard_endpoint: another.exemple.com
+```
+
+Playbooks
+---------
+
+```
+- hosts: vpn1
+  roles:
+    - wireguard
+```
+
+```
+- hosts: vpn2
+  roles:
+    - wireguard
+```
+
 License
 -------
 

defaults/main.yml

@@ -1,21 +1,9 @@
 ---
-# The LOCAL directory where the WireGuard certificates are stored after they
-# were generated. By default this will expand to user's LOCAL ${HOME}
-# (the user that run's "ansible-playbook" command) plus
-# "/wireguard/certs". That means if the user's ${HOME} directory is e.g.
-# "/home/da_user" then "wireguard_cert_directory" will have a value of
-# "/home/da_user/wireguard/certs". If you change this make sure that
-# the parent directory is writable by the user that runs "ansible-playbook"
-# command.
-wireguard_cert_directory: "{{ '~/wireguard/certs' | expanduser }}"
-wireguard_cert_owner: "root"
-wireguard_cert_group: "root"
-
 # Directory to store WireGuard configuration on the remote hosts
 wireguard_remote_directory: "/etc/wireguard"
 
-# The port WireGuard will listen on.
+# The default port WireGuard will listen if not specified otherwise.
 wireguard_port: "51820"
 
-# The interface name that wireguard should use.
+# The default interface name that wireguard should use if not specified otherwise.
 wireguard_interface: "wg0"

tasks/main.yml

@@ -14,7 +14,6 @@
     - wireguard-tools
   tags:
     - wg-install
-    - skip_ansible_lint
 
 - name: Enable WireGuard kernel module
   modprobe:
@@ -28,106 +27,59 @@
   tags:
     - wg-install
 
-- name: Create WireGuard certificates directory
-  file:
-    dest: "{{ wireguard_cert_directory }}"
-    state: directory
-    owner: "{{ wireguard_cert_owner }}"
-    group: "{{ wireguard_cert_group }}"
-    mode: 0700
-  run_once: true
-  delegate_to: localhost
-  tags:
-    wg-generate-keys
-
 - name: Set WireGuard IP (without mask)
   set_fact:
     wireguard_ip: "{{ wireguard_address.split('/')[0] }}"
 
-- name: Set path to private key file
+- name: Register if config/private key already exists on target host
-  set_fact:
-    private_key_file_path: "{{ wireguard_cert_directory }}/{{ inventory_hostname }}.private.key"
-  tags:
-    wg-generate-keys
-
-- name: Set path to public key file
-  set_fact:
-    public_key_file_path: "{{ wireguard_cert_directory }}/{{ inventory_hostname }}.public.key"
-  tags:
-    wg-generate-keys
-
-- name: Register if private key already exists
   stat:
-    path: "{{ private_key_file_path }}"
+    path: "{{ wireguard_remote_directory }}/{{ wireguard_interface }}.conf"
-  register: private_key_file_stat
+  register: config_file_stat
-  delegate_to: localhost
   tags:
     - wg-generate-keys
+    - wg-config
 
+- block:
   - name: Generate WireGuard private key
     shell: "wg genkey"
     register: wg_private_key_result
-  when: not private_key_file_stat.stat.exists
     tags:
       - wg-generate-keys
-    - skip_ansible_lint
 
   - name: Set private key fact
     set_fact:
-    wg_private_key: "{{ wg_private_key_result.stdout }}"
+      private_key: "{{ wg_private_key_result.stdout }}"
-  when: not private_key_file_stat.stat.exists
     tags:
       - wg-generate-keys
+  when: not config_file_stat.stat.exists
 
-- name: Generate WireGuard public key
+- block:
-  shell: "echo '{{ wg_private_key }}' | wg pubkey"
+  - name: Read WireGuard config file
-  register: wg_public_key_result
+    slurp:
-  when: not private_key_file_stat.stat.exists
+      src: "{{ wireguard_remote_directory }}/{{ wireguard_interface }}.conf"
+    register: wg_config
     tags:
-    - wg-generate-keys
+      - wg-config
+
+  - name: Set private key fact
+    set_fact:
+      private_key: "{{ wg_config['content'] | b64decode | regex_findall('PrivateKey = (.*)') | first }}"
+    tags:
+      - wg-config
+  when: config_file_stat.stat.exists
+
+- name: Derive WireGuard public key
+  shell: "echo '{{ private_key }}' | wg pubkey" # noqa 306
+  register: wg_public_key_result
+  changed_when: false
+  tags:
+    - wg-config
 
 - name: Set public key fact
   set_fact:
-    wg_public_key: "{{ wg_public_key_result.stdout }}"
+    public_key: "{{ wg_public_key_result.stdout }}"
-  when: not private_key_file_stat.stat.exists
   tags:
-    - wg-generate-keys
+    - wg-config
-
-- name: Store hosts private key locally
-  template:
-    src: "wg-privatekey.j2"
-    dest: "{{ private_key_file_path }}"
-    owner: "{{ wireguard_cert_owner }}"
-    group: "{{ wireguard_cert_group }}"
-    mode: 0644
-  when: not private_key_file_stat.stat.exists
-  delegate_to: localhost
-  tags:
-    - wg-generate-keys
-
-- name: Store hosts public key locally
-  template:
-    src: "wg-publickey.j2"
-    dest: "{{ public_key_file_path }}"
-    owner: "{{ wireguard_cert_owner }}"
-    group: "{{ wireguard_cert_group }}"
-    mode: 0644
-  when: not private_key_file_stat.stat.exists
-  delegate_to: localhost
-  tags:
-    - wg-generate-keys
-
-- name: Read private key
-  set_fact:
-    private_key: "{{ lookup('file', private_key_file_path) }}"
-  tags:
-    wg-config
-
-- name: Read public key
-  set_fact:
-    public_key: "{{ lookup('file', public_key_file_path) }}"
-  tags:
-    wg-config
 
 - name: Create WireGuard configuration directory
   file:
@@ -149,6 +101,21 @@
   notify:
     - restart wireguard
 
+- name: Check if reload-module-on-update is set
+  stat:
+    path: "{{ wireguard_remote_directory }}/.reload-module-on-update"
+  register: reload_module_on_update
+  tags:
+    - wg-config
+
+- name: Set WireGuard reload-module-on-update
+  file:
+    dest: "{{ wireguard_remote_directory }}/.reload-module-on-update"
+    state: touch
+  when: not reload_module_on_update.stat.exists
+  tags:
+    - wg-config
+
 - name: Start and enable WireGuard service
   service:
     name: "wg-quick@{{ wireguard_interface }}"

templates/wg-privatekey.j2

@@ -1 +0,0 @@
-{{hostvars[inventory_hostname]['wg_private_key']}}

templates/wg-publickey.j2

@@ -1 +0,0 @@
-{{hostvars[inventory_hostname]['wg_public_key']}}

templates/wg.conf.j2

@@ -15,9 +15,9 @@ PostDown = {{hostvars[inventory_hostname].wireguard_postdown}}
 {% if hostvars[inventory_hostname].wireguard_save_config is defined %}
 SaveConfig = true
 {% endif %}
-
+{% for host in ansible_play_hosts %}
-{% for host in groups["vpn"] %}
   {% if host != inventory_hostname %}
+  
     [Peer]
     PublicKey = {{hostvars[host].public_key}}
     {% if hostvars[host].wireguard_allowed_ips is defined %}
@@ -28,11 +28,18 @@ SaveConfig = true
     {% if hostvars[host].wireguard_persistent_keepalive is defined %}
     PersistentKeepalive = {{hostvars[host].wireguard_persistent_keepalive}}
     {% endif %}
-    {% if hostvars[host].wireguard_endpoint is not defined %}
+    {% if hostvars[host].wireguard_port is defined and hostvars[host].wireguard_port is number %}
-    Endpoint = {{host}}:{{wireguard_port}}
+      {% if hostvars[host].wireguard_endpoint is defined and hostvars[host].wireguard_endpoint != "" %}
-    {% elif hostvars[host].wireguard_endpoint != "" %}
+    Endpoint = {{hostvars[host].wireguard_endpoint}}:{{hostvars[host].wireguard_port}}
-    Endpoint = {{hostvars[host].wireguard_endpoint}}:{{wireguard_port}}
+      {% else %}
+    Endpoint = {{host}}:{{hostvars[host].wireguard_port}}
+      {% endif %}
+    {% elif hostvars[host].wireguard_endpoint is defined and hostvars[host].wireguard_endpoint != "" %}
+    Endpoint = {{hostvars[host].wireguard_endpoint}}:{{wireguard_port}}
+    {% elif hostvars[host].wireguard_endpoint == "" %}
+    # No endpoint defined
+    {% else %}
+    Endpoint = {{host}}:{{wireguard_port}}
     {% endif %}
-
   {% endif %}
 {% endfor %}